Torsion Testing Machine Dealers in Delhi

• Brand Name: SBSW
• Application: METAL TESTING MACHINE
• Model Number: 7053058616

TORSION TESTING MACHINE SPECIFICATION:- For conducting torsion and twist tests on various metal wires, tubes, sheet materials . Capacity-50kg-m Ranges- , 50, 25, 25 & 10 kg-m No. of division on dial- 500 Torsion speed & direction- Fixed Reverse Clearance between grips- 0-500mm Grips for round bar- 10-30mm Width- 40 mm Motor- 3 H.P.

• Brand Name: Steco
• Capacity: 0 to 50 kgm
• Rod to Be Tested: 8 to 20 Mm
• Load of Measurement: Torque and Twist will be read directly
• Other Provisions: Automatic Stop in Case of Failure of Specimen

Torsion Testing Machine is a simple and accurate way for conducting torsion and twist tests on various materials. Clients from all over the world prefer our machine for its excellent testing methods and various customized functions. We stand as a distinguished Manufacturer, Supplier and Exporter of Torsion Testing Machine from Delhi, India. Features : Unique "Talon -Claw" Grips for Round and flat specimens (optional at extra cost) Torsional Speed of 0.1/0.2 RPM (optional at extra cost) Torque Compensated Motors Maintenance Free gear Box Auto Range selection with Range selector wheel (optional at extra cost) 3 or 4 Torque Ranges for higher Accuracy (optional at extra cost) Highlights : Designed for conducting torsion and twist tests on various materials Torque measurement is by an electronic torque transducer for direct display of torque Torque is applied to specimen by geared motor through gear box The accuracy of the torque indication is ±1% of the true torque The complete system is hydraulically damped for vibration free loading. Able to retrieve or print testing results after the test Mainly suitable for materials labs of scientific research, department, Colleges or universities and industrial enterprises to test the mechanical properties under torsion condition   Main applications : Testing machine is used for the torsion test for all kinds of materials, by imposing a torque. There are two testing methods: Automatic Testing : Turn the hand wheel until the test rod breaks. The testing machine will automatically test the yield M1 and the maximum torque M2. Manual testing : Choose the test angles and tropes of any 9 points during the testing period and records them. Main Technical Specification : Max. test torque : (N.m) 200 Min. reading of torque : (n.m) 0.02 Torque measurement angle : (N.m) 20-200 Max. reading of torsion angle : 9999.95 Min. reading of torsion angle : (o) 0.5 Relative error of torque indications

Main Application:This testing machine uses computer controlled japanese AC servo system and is loaded through the active clamping head driven by the AC servo motor and cycloidal pinwheel redution motor.The torque and torsion angle are measured with high precision torque transducer and photoelectric encoder.computer will dynamically display the test torsion curve,loading speed peak value and so on.It is mainly used for the torsion test of mental and non mental materisls as well as the torsion test for parts and components.. It is an essential instrument to measure torsion properties of materials for mechanic laboratories of aviation industry.construction industry scientific resarch dept universities or industrial enterprises.Main Functions and Features Loading mode :- we use imorted AC servo motor and driver testing of torque and torsion angle High precision symmetrical torque transducer for torque testing and high precision photoelectric encoder for angle testing Operation :- Manual control and computer control WINDOWS based software to calculate mechanical indexes of materials.Auto process test data Dynamically display testing curve,store andd print the testing results. Operator can intervene in the analysis process and thus improve the accuracy of test results.

• Country of Origin: India
• Type: Digital
• Certification: CE Certified
• Voltage: 220V
• Driven Type: Electric
• Warrenty: 1 Year
• Application: Torsion Testing

Suitable for Torsion and Twist test on various metal rods and flats. Torque Measurement by pendulum dynamometer system. Auto torque selector to adjust torque ranges. Geared motor to apply torque to specimen through gearbox. Autographic recorder for relation between torque and angle of twist. Accuracy + 1 % of the true torque Models Available - Mechanical & Digital/Computerised

It is designed for conducting Torsion and Twist Tests on various metal wires, tubes sheet materials. Torque measurement is by Pendulum dynamometer System. Torque ranges can be adjusted. Torque is applied to specimen by geared motor through gear box. Autographic recorder can be provided to know the relation between torque and angle of twist on specific request. The Accuracy of the torque indication is ± 1% of the true torque. The complete system is hydraulicly damped for vibration free Loading.

• Brand Name: SRI
• Display Type: Digital
• Power Supply: 220V-440V
• Body Material: Mild Steel
• Packaging Type: Wooden Pack
• Phase: 3 Phase
• Surface Treatment: Powder Coated

• Tests done: :  Torsion, Winding, Wrapping
• Vices: :  Two, One stationary and one Rotating.
• Motor: :  Single Phase, 1 hp Motor
• Rotation Counter: :  Digital Electronic Counter with Proximity Switch
•  :  
• Power : 1 KW: Voltage : 220 V 50 Hz
• Delivery : 5 to 6 weeks: Packing : One Wooden Box

Model Number: SSI 523 Standard Number: IS 10810 Pt 38IS 10810 Pt 39IS 10810 Pt 3   During the armoring process and subsequently during laying of the cable, the armor wires are subjected to torsion stress.  The test is conducted to evaluate the torsion resistance of the wire.   A Unique Machine which conforms to three different test standards. The machine is manufactured as per IS 10810 Pt 38 (Torsion  Test On Galvanized Steel Wires For Armoring.), IS 10810 Pt 39 (Winding Test On Galvanized steel Strips For Armoring.) and IS 10810 Pt 3 (Wrapping  Test  For Aluminum Wires). for wire.     During the armoring process and subsequently during laying of the cable, the armor wires are subjected to torsion stress.  The test is conducted to evaluate the torsion resistance of the wire. The wire is attached between the two vices and twisted / turned. The no of turns required to break the wire is then noted.     The Instrument consists of following:        Two Vices.        Heavy Duty Motor        Weight attachment to provide tension to sample         Attachment for Winding  and wrapping Test complete with weight and Mandrels

• accuracy: + 1%

Torsion Testing Machine is designed for conducting Torsion and Twist Tests on various metal wires, tubes and steel materials. Torque measurement is by Pendulum Dynamometer System. Torque ranges can be adjusted. Torque can be applied to specimen by geared motor through gear box. Autographic recorder can be provide to know the relation between torque and angle of twist on specific request. The accuracy of the torque indication + 1% of the true torque.

The number of twist required to fracture a wire sample can be determined rapidly with this machine . The standard machine consists of a gear box coupled with a motor to give out put of either 30,60 or 90rpm. A revolution counter indicates the total number of twist , and stops counting when the sample fails. The distance between the rotating and non-rotating chuck can be between these two chucks. The wires from 1 to 10 mm can be tested with this machine. The machine is electrically operated suitable for operate on 400-440 volts, 3 phase , ac supply. The machine is available in two models one for testing wires in the range of 1-5 mm and the other 4-10 mm.

• Model: EEMTL71M0009
• Categories: Material Lab
• Torsional speed: 0.1/0.2 RPM.
• Maximum display torque: 100 Nm
• Minimum torque readings: 0.06 Nm
• Power: AC220V±10%
• Maximum test space: 260 mm
• Torque relative error: ≤±1.0%

We offer the premium range of Torsion Testing Machine that is made keeping in mind the needs of the customers. Due to the premium quality of our Torsion Testing Machine, it is highly used in the various industries. Features Optimum qualityHigh durabilityMaintenance freeRobust construction Ideal for Testing Metal wiresTubesSheet materials

Unique "TALCON-CLAW" Grips for Round and Flat specimens2). Torisonal Speed of 0.1/0.2 RPM3). Torque Compensated Motors4). Maintenance Free Gear Box5). Auto Range Selection with Range Selector Wheel (Optional)6). 3 or 4 Torque Ranges for Higher Accuracy (Optional)7). Load-unload Capability8). Variable Speed Drive (Optional) LabTek Torsion Testing Machine is designed for conducting Torison and Twist Tests on various metal wire, tubes sheet materials. Torque measurement by pendulum Dynamometer System. Torque ranges can be adjusted. Torque can be applied to specimen by geared motor through gear box, Autographic recorder can be provided to know the relation between torque and angle of twist on specific request

Features:   Unique "Talon -Claw" Grips for Round and flat speciemens ( optional at extra cost) Torsional Speed of 0.1/0.2 RPM (optional at extra cost) Torque Compensated Motors Maintenance Free gear Box Auto Range selection with Range selector wheel (optional at extra cost) 3 or 4 Torque Ranges for higher Accuracy (optional at extra cost )   It is desighned for conducting torsion and twist tests on various materials.Torque measurement is by an electronic torque transducer for direct display of torque.Torque is applied to speciemen by geared motor through gear box.The accuracy of the torque indication is +_ 1% of the true torque.The complete system is hydraulicly damped for vibration free loading.   Main applications: This kind of testing machine is used for the torsion test foir all kinds of materials,by imposting a torque.There are two testing methods Automatic Testing :- Turn the hand wheel until the test rod breaks.The testing machine will automatically test the yeild M1 and the maximum torque M2. Manual testing :- Choose the test angles and tropes of any 9 points during the testing perios and recors them. Able to petreeive or print testing results after the test   It is mainly suitable for materials labs of scientific resarch department.colleges or universities and industrial enterprises to test the mechanical properties under torsion condition   Main Technical Specification:   Item Names                                               specification Max.test torque (N.m)                                    200Min.reading of torque (n.m)                          0.02Torque measurement angke (N.m)              20-200max reading of tosion angle                        9999.95Min.reading of torsion angle (o)                  0.5Relative error of torque indications           

• Brand Name: FIE
• Weight: 200 kg
• Maximum Torque Capacity: 60, 100, 200 Nm
• Size: 1.8x0.5x0.5 m
• Madel: TWISTO-100
• Least Count: 0.006, 001, 0.02
• Clearance Between Grips: 500 mm
• Cross Head Displacement Resolution: 0.01 mm
• Power Supply: 230 VAC, 50 Hz, Single Phase
• Torsion Speed: Variable from 15 to 100 RPM
• Width of The Grip: 25 mm

Torsion Testing Machine is designed for conducting torsion and twist on various metal wires, tubes, sheet materials. Torque measurement is by pendulum dyanometer system. Torque ranges can be adjusted by auto torque selector. Torque can be applied to specimen by geared motor through gear box. Autographic recorder gives the relation between torque and angle of twist.

We are an eminent Manufacturer, Exporter and Supplier of Wires & Cables Torsion Testing Machine from New Delhi, India. Our Wires & Cables Torsion Testing Machine accurately determines the number of twists requisite to fracture a wire sample. The Wires & Cables Torsion Testing Machine generates an output of 30, 60 or 90 rpm with the help of gear box, which is connected with a motor. The revolution counter of our Wires & Cables Torsion Testing Machine illustrates the number of twist. The machine is capable of stopping itself whenever the sample fails. The wire in the machine remains between a rotating and a non-rotating chuck, whose distance lounge is between 1-500mm in length. Operated on 400/440 volts, 3 phase AC supply, Wires & Cables Torsion Testing Machine can efficiently test wires ranging from 1-10 mm in length.   Models for testing wire Range between 1-5mm lengthRange between 4-10mm length