Distribution Transformers Dealers in Ranjit Nagar, Delhi

Transformer Manufacturers India is one of the major Manufacturers, Suppliers and Exporters of Auxiliary Transformers, based in India. Auxiliary Transformers are ideally designed to be used in railway industry to fulfill the power requirements of the auxiliary equipment. This transformer type is also regarded as economical source of the power. In the constriction of the transformer, there are three windings provided that includes one primary winding and two separate secondary windings. Moreover, the primary winding voltage rating is same as a main generator. The other two windings may be of the same or different voltages may it be 11KV and or 6.9KV, according to the application area. Our wide range of Auxiliary Transformers is specially designed keeping in mind the requirement of different industries. These Auxiliary Transformers are available in various capacities to meet the needs of the esteemed department of Railways. Further, we offer Auxiliary Transformers at market leading prices. Construction of Unit Auxiliary Transformers: Conservator vessel with cap and oil filling hole For local 100% humidity conditions the transformer is breather designed Main tank plug and drain valve Thermometer pocket to measure temperature of the oil Lifting eyes to lift the core Lifting lugs to lift the complete transformer Contact with over pressure relief valve for indication/control Magnetic oil level gauge Dial type thermometer with utmost interpreting pointer in order to measure oil temperature with contact for the purpose of alarm. Diagram plates and rating in accordance to the latest relevant IEC requisites Tank earthing terminals Highlights of Station Auxiliary Transformer: Auxiliary Transformers is almost 15% of the generating KVA rating These are outdoor transformers Auxiliary transformer is available for every generating unit. The function is to provide power to generator auxiliaries of the respective unit. Connected with the generators and are used as an alternative for stepping down transformers. Specific Features of Auxiliary Transformers: Low power loss and low noise Advanced manufacturing techniques ensure cost effectiveness and reliability Shockproof nature Designed to withstand electrical impulses and thermal and dynamic stresses Made of high grade components Low maintenance cost Provides a long trouble-free performance Application of Unit Auxiliary Transformer: Electronics Industry Households Factories Railways Power Systems

• Brand Name: Power
• Certification: ISI Certified
• Application: Industrial Use
• Color: Yellow
• Form: Liquid
• Purity: 100%

Utilizing the most advance and versatile design concept available in the market today, DELTA Three Phase Transformer line is intended for applications demanding good performance and product features.   DELTA Transformer manufactures three Phase Transformer in the range of 0.5KVA to 16 KVA 

Manufacturer, exporter & supplier of isolation transformer. We present high tech isolation transformers, especially new gold, isolation & ultra transformer, control transformer, auto transformer (single phase, two phase & three phases). This isolation transformer can also be developed into step up & step down. The voltage range is 10 v to 5000 volt, & frequency 25 hz to 500 hz (general use 50 hz & 60 hz). Our isolation transformer reduces the effects of power line problems like noise, spikes, surges transients and neutral to a minimum. care description of machine & instrument : switching of electrical utilities in industrial & commercial environment generates spikes up to 6000 volt & high frequency power line noises.the spikes can cause the failure of thrusters, micro-processors, or other active electronic device. the high frequency noises can interfere with digital-electronic equipment causing data corruption, erratic behavior, loss of memory etc.the noise cut-off transformer eliminates such noises & attenuates the spikes to negligible values, providing complete protection against such electrical disturbances. applications : protects the cnc machines, computer and telecommunications equipment from damage due to electrical noise, spikes etcwhere ground potential of system units are different from each otherwhere ground of the equipment cannot be earthedwhen no slightest current leakage is permitted in the equipmentto protect against strong lighting, impulse noise, bus short- circuit, accidental discharge of capacitors etcto shield large number of electronic equipment which individually also are producing different type of electrical noise

• Type: Dustbin
• Material: Stainless Steel
• Color: Silver
• Pattern: Plain
• Condition: New
• Structure: Standing

• Cooling Type: Oil Cooled
• Phase: Three Phase
• Frequency: 50 Hz
• I Deal In: New Only
• Voltage at No Load: 0.400 V
• Vector Group: Dyn-5

Maestro make Sealed/Conventional, Single/Three Phase, 50 Hz aluminium/copper double wound, oil immersed, continuous heavy duty transformers are designed with Class A / Class F insulation to withstand short circuit and impulse test standards. These are robust and durable machines which last for many years. CORE Core used is made from best grade imported cold rolled grain oriented silicon steel laminations with the hi-tech latest technique of annealing. Reduced core losses and magnetizing the current considerably, core is specially designed to sustain over fluxing up to 12.5%. Individual stamping insulated on both side with oil and temperature resistant insulating material. Core is stamped with steel channels rigidly to reduce the sound level and earthed with electrical grade copper sheet. WINDING The winding are of different type 1)Spiral 2)Crossover 3)Helical 4)Disc, designed to withstand the optimum electrical, mechanical, dynamic and thermal stresses depending upon the current and voltage. The coils are wound with electrolytic grade high conductivity, annealed wire and strips covered with high quality insulation. All coils are reinforced, insulated and impregnated with insulating varnish to with stand the effect of short circuits and impulse voltage shocks. Cooling ducts are provided to minimize the hotspot temperature and temperature gradient between winding and oil. INSULATION AND OIL The Insulation material like pre-compressed boards, blocks, corrugated cylinders, Bakelite tubes, insulating tapes, empire sleeves, glass sleeves, varnish, epoxy bushing, porcelain bushing etc. are used of best quality to ensure long life of transformers. Oil used as a coolant and insulating medium is of best quality confirming to IS:335. Before filling in to the transformers, oil is centrifuged, dehydrated and filtered through ’Stream Line Filtration plant’ and tested to ensure free from moisture. TANK AND RADIATORS The Tanks are made from prime quality mild steel sheets, plates and pipes by electrical welding. Proper bracing and stiffeners are provided for robust construction. The tanks are tested as specific pressure for leakage at joints. Sufficient cooling radiators are provided for maximum dissipation of heat during extreme ambient temperatures. The radiators are made from best grade presses steel fins or elliptical tubes. PAINTING Tank surface exposed to atmosphere is galvanized / painted with two coats of red oxide paint to provide maximum resistance to corrosion and two coats of epoxy based anti-corrosion enamel paint. Surface in contact with oil is treated with two coats of ‘Oil and Heat Resistant paint’. This paint has more effective resistance compared to ordinary enamel paint against corrosion and oil/heat reactions. VECTOR GROUP Dyn11, Various vector groups can be provided as per requirement. TEMPERATURE RISE Designed for maximum temperature rise at full rated load 40⁰C / 50⁰C for oil and winding of aluminium wound transformers and 45⁰C / 50⁰C for oil and winding of copper wound transformers. OVERLOADING Maestro Transformers are designed for overloading more than normal rating as per IS:6600 TERMINAL ARRANGEMENT H. V. - Bare Bushings or Cable Box, L. V. - Bare Bushings or Cable Box. Disconnecting chambers can also be provided on both HV and LV Cable boxes.

• Cooling Type: Dry Type/Air Cooled
• Brand Name: Brahma
• Color: Black
• Frequency: 50 - 60 Hz
• Phase: Single Phase, Three Phase
• Input Voltage: 220 - 240 Volts
• Output Voltage: 15 KV
• E. D.: 50%
• Power: 5 KVA

Power Transformer provided by us are trustworthy and durable with zero percent compromise on quality. We have a very popular name in market as power Transformer Supplier. Our mission is customer satisfaction with superior quality of Electric Power Transformers. We also deal in Wholesale Power Transformerwith the very competitive prices.

SCS is one of the best manufacturer and supplier of high quality distribution transformers from India.

Compact Substation, asco auto, Transfer Switch

Distribution Transformer, Generator Transformer, Furnace Transformers

Electrical Transformer, Auto Transformers, Line Choke

Distribution Transformer, Furnace Transformers, Generator Transformer

Power Distribution Transformer, rectifiers transformers