Transmission Seal Dealers in Pushpanjali, Delhi (15 products available)

POLYFIX ®  wood seal is the ideal material to build stable maintenance of wood cracks and holes that are not easy to remove and costly to replace. POLYFIX ®  wood seal adhesive make a long-lasting repair on damaged or rotted wood.POLYFIX ® wood seal is easy to handle too. Other old method glues takes lots of time for repairs but with POLYFIX ® wood seal you done it in few minutes.Whether a wood hole or crack wants a seal repairing, POLYFIX ® wood seal is the first thing that woodworker, timber mart, cabinetmaker hard wood user and contractors use for all their creation or repair on wood needs. POLYFIX ® wood seal is available at large home centres. Otherwise, you can purchase it on the online shopping sites. Advantage:- Very fast and quick bonding, Sets almost in a minutes. Multi-use, Able to fill cracks and holes in hard and soft wood both with a wide range of wood available in market. No need of heating or mixing. Time Saving: Due to fast curing speed time consumption is very low as compared with conventional water based adhesive used in this application. It doesn’t require waiting dry for a longer period. Precautions:- Read the Application Instructions Beforehand. Choose a Well Ventilated Work Area. Never Open the Container Carelessly. Wear Gloves. Close the cover Tightly After Use. Be Patient if there is an Accident. Usage Hard Wood like Sheesham and Teak Applications Door and Windows, Dining Tables, High Quality Sofa/ Beds, Bookcase, Almirah&  Wardrobes and Chairs Manufacturers Packing 250 Gram plastic bottles 50 Gram plastic bottles

POLYFIX Wood Seal is the fastest and strongest sealant to seal the holes in wood, without cracking, shrinking, sinking or falling out like many water based fillers. Fills cracks and holes. Dries hard and smooth in less than minute. May be stained when dry or just add stain, Other Fillers have trouble accepting stain. Non-flammable & provides long and durable bond. Long seal life. Directions to UseDetermine the color of the wood and/or wood stain and fill powder of same colour and then pour POLYFIX Wood Seal on powder to harden. Area should be clean and dry. If gouge is rough, sand it first Always use the pad rubbing in the direction of the grain. Lightly sand the defective area using a rubber block and sandpaper to remove any ridge around the damage area. Make sure area is completely dry before proceeding to the next step. Clean any loose material out of the defect. You will need to remove the darkened material using a knife or sandpaper. It is better to have your repair lighter in color to the surrounding area than darker Allow to dry completely between layers. Slightly overfill the defect. Always scrap in the direction of the damage, keeping both edges of the putty knife on solid wood. Gently buff the repair using a clean white cotton towel working with the grain. Allow the material to dry hard (1-5 minutes depending on depth of repair.) Once dry, sand flat using sandpaper. Sand in the direction of the grains. Benefits Very fast and Quick Setting, Sets almost in a minute Versatile, Able to seal hard and soft wood both with a wide range of wood available in market. No need of heating or mixing. Time Saving, Due to fast curing speed time consumption is very low as compared with conventional water based adhesive used in this application. It doesn't require waiting dry for a longer period. LimitationsSlightly expensive as compared to conventional water adhesive used earlier in this application. Difficult to apply in big holes- As the material is expensive the covering of big holes will not be viable Health hazard dataOur product is not included in any list for carcinogenicity. Possible routes of entry for the sealant include skin and ingestion.. Do not get sealant on your skin or other parts of your body, or that of others. In case of body contact, flush with water. Seek medical attention for any eye or internal contact. Warning  Eye Irritant Bonds skin in seconds EffectsEye Contact : Cyanoacrylates are eye irritants and tissue bonders. Anyone using it should take extreme care. Precautions should be taken like use of goggles, in order to avoid eye contact. In case the adhesive comes in contact with the eye, the eyes should be continuously washed with water for some time and the person should be provided medical aid immediately. If eye lids are bonded closed, no one should attempt to separate them except a qualified physician. In case of bonding corneal surface, forced separation is not recommended at all. Leave the eye to remain closed and allow the bond to separate naturally, which usually occur within a few days.Skin Contact : Cyanoacrylates are mild irritants to the skin. Though relatively non-toxic, they quickly form strong bonds between adjacent skin surfaces, e.g. fingers. To separate them, the bonded part should be soaked in warm and soapy water for sufficient time and then the bond should be gently peeled off. Alternatively, a dull instrument such as a table knife or a thin wire can be forced through the bond. Solvents like acetone or nail polish remover can also be used but with appropriate caution.In case the adhesive is spread over a large skin area, that part of the skin should be flushed with large amounts of water. To wipe off excess adhesive, a soaking wet cloth can be used. If the adhesive has soaked through clothing, use huge amount of water to flush the involved area. If the cloth has bonded to the skin, the skin can be damaged if the bonded clothing is attempted to be removed without these precautions. The adhesive will automatically flake off from the skin within a day or so.Oral Contact: Though Cyanoacrylates are relatively non-toxic, rapid polymerization (hardening) of the adhesive will take place if they come in contact with the surfaces of the mouth. The mouth should be continuously flushed with water and medical aid should be provided immediately. In case lips are bonded, hot water or solvent can be used to gently peel apart the adhesives.

Color : Black

Material : Rubber

Country of Origin : Made in India

Model Name/Number : SP-1800

Size : DN-190

I deal in : New Only

Country of Origin : India

Type : Engine oil for tow Weller

Application : For Engine Oil

Color : Golden

Feature : Full synthetic

Condition : New

Brand Name : New Castroi racing engine oil

Style : Bottel

Certification : Iso

Usage : All vehicle

Name : New Castroi racing engine oil

Product : Engine oil

All India : Supply

Mobile : 94 117265 33

We are looked upon prime manufacturer, supplier and exporter of oil seals from delhi. We offer different types of oil seals like metric oil seals, rotary oil seals, 8. Shaft oil seals, hydraulic oil seals, bonded oil seals and many others. The oil seals offered by us have emerged as the perfect sealing solution for different industries due to their long life and prefect sealing capacity specialty durable and strongspecial designdifferent variantsexcellent sealing capacity variants metric oil sealsrotary oil sealsshaft oil sealshydraulic oil sealsbonded oil sealslip oil seals made from high quality synthetic rubber with special additives widely used in automobilestractorsindustrial & diesel enginesair & gas compressionstruck agricultural machineryachine tool industries