Triaxial Cell Dealers in Delhi

Suitable for testing 38mm, 50mm, 75mm and 100mm diameter specimens. The equipment comprises the following : Perspex cell with anvil and loading plunger. The cell can be easilly opened by releasing the nuts and is leakproof upto 10kg/cm. sq. fluid pressure. An oil plug which can also be used as an air vent is provided for introducing a thin layer of oil over water. This provides effective sealing at the plunger for long duration tests. The cell is fitted with four sleeve packed valves of no volume change type on the base. Brass Pedestals for 38mm, 50mm, 75mm and 100mm dia specimen. Perspex Loading pads for 38mm, 50mm, 75mm & 100 mm dia specimen. Pairs of plain discs 38mm, 50mm, 75mm & 100mm dia. Pairs of porous stones one each for 38mm, 50mm, 75mm & 100mm dia samples. Spilit sand formers for 38mm, 50mm, 75mm & 100mm dia specimen. Sheath stretcher for 38mm, 50mm, 75mm & 100mm dia specimen. One dozen rubber sheaths for 38mm, 50mm, 75mm & 100mm dia specimen. Four rubber ‘O’ rings each for 38mm, 50mm, 75mm & 100mm dia specimen. Set of four slotted ring spacers for sand formers and four pairs of polythene drainage tubes.

• Features: Anti-corrosive ,Quality tested , Precious design

CRT: In cooperation with Polytechnic Lille and the team of Professor Shao, Top industries has developed a new concept of Triaxial cell, focused on ease of use while incorporating optimal security rules and compliance with European standards of appliances pressure. The continuity of cells for samples Ø 37mm, simple and easily transportable, and a new generation of turnkey Triaxial cells incorporating means of implementation, piloting and acquisition that will allow you to quickly reference results. At the same time, we have developed a wide range of high-pressure generators, covering the needs of axial pressure generation, containment and drainage.

Aimil Triaxial Cells conform to the requirements of IS:2720 (Part 11) & (Part 12) and are made from corrosion resistant material. Particular attention is paid to the quality of the finish between the stainless steel plunger and the bushing. The cell cylinders are made from acrylic plastic material and those for use upto 20 bar (20 kgcm2 ) are usually reinforced by bands. Each cell has four take-off positions, drilled in the base, for Cell pressure, Pore water pressure, Drainage or back pressure. All valves are of 'no-volume change' type. Universal triaxial cells accept a range of base adaptors for testing a wide range of specimen sizes.

• Thickness: 6mm
• diameter: 38mm

The cell is useful for testing 38mm dia x 76mm high soil specimen. Transparent Perspex chamber with anvil and loading plunger, the cell is easily opened by releasing four nuts of the tie rods. It is leak proof up to 10kgcm.sq. Fluid pressure. An oil plug which can also be used as an air vent is provided for introducing a thin layer of oil over water. This provides effective sealing at the plunger for long duration tests. The cell is fitted with four sleeve packed valves of no volume change type on the base. These valves are used for cell pressure, pore water pressure, drainage or back pressure. The loading plunger of the cell has dial gauge rest. Loading pad made of Perspex for 38mm dia specimens. Pair of plain discs made of Perspex 38mm dia 6mm thick. Pair of porous stones 38mm dia specimen. Split sand former for 38mm dia specimen. Sheath stretcher for 38mm dia specimen. One dozen rubber sheaths for 38mm dia samples. For synthetic rubber 'o' rings for 38mm dia specimen. One plastic drainage tube.

Triaxial Cell, Scientific Instruments, vane shear test equipment

Triaxial Cell, analytical equipment, Turbiscan Tower Dispersion Analyser

Triaxial Cell, subsonic wind tunnel, Colour Matching Cabinet

Triaxial Cell, Scientific Instruments, vane shear test equipment

Triaxial Cell, Compression Testing Machine, Calibration Services