Tube Furnace Dealers in Delhi

We manufacture and supply ,argon purifier furnaces, heating elements, tube furnace, thermocoples,carbon sulfur apparatus and quality lab metallurgical testing equipment,lab ovens,air circulation ovens and lab testing equipment etc kindly contact us for any above related enquiry we look forward to serve you with our best quality products and serviceswe can,supply heating elements,thermocouples, thyristorise energy saving panels,retort etc.

• Tube material: Quartz
• Tilting angle: 0 to 180°C
• Top Temperature: 1200°C
• Working Temperature: 1100°C
• Heating zone length: 200 / 300 mm
• Insulation layers: High-Purity Alumina Ceramic fiber
• Structure: Non-Split
• Heating Rate: 0 – 15°C / min
• Control Accuracy: ±1°C
• Temperature Sensor: K-type Thermocouple
• Heating Element: Resistance heating wire
• Sealing: Flanges
• Power supply: 220 Volts 50Hz
• Accessories: One pair of high temperature furnace gloves,  One piece of steel tong, One set of sealing flanges.
• Optional: Vacuum pump, Quartz boat, Gas-mixing system with mass flow meter

• Country of Origin: Made in India
• Melting Material: Iron
• Voltage: 220
• Power Source: Diesel
• Type Of Furnace: Fix

This Rotary Tube Furnace comes complete with DC variable speed control and temperature control system. The rotary tube furnace can be for industrial or laboratory use and is cost effective for Research and Development environments.

Tube furnaces are another kind of laboratory furnace that is used in tensile testing, stress rupture testing, melting components and annealing etc. These units are equipped with quartz tube and vacuum flanges with suitable heating elements. We are tube furnace manufacturers in India and our units are designed for research environment to do your high temperature test in very safe way. iLabot tube furnaces feature rugged construction, easy operation and excellent temperature accuracy. We make horizontal tube furnaces that adopt 40, 60, 70, 80 and 100 mm quartz tubes and a pair of steel vacuum sealing flanges. These units are designed to work on 1100°C, 1300°C and 1500°C and equipped with digital programmable PID controller for excellent temperature accuracy throughout cycle. During in our 25 years we have manufactured and supplied so many furnaces to various Government and private sectors in India. We supply these units with complete installation and commissioning facilities.  

• Available up to 1800°C temperature: Uniform temperature control
• Shorter melting time: International quality standard heating element
• Rapid heating and cooling: Low volume of flue gases

We are manufacturing high temperature tube furnaces for wide range of laboratory and industrial applications. Each model is custom designed and matched with specifications provided by the customers. Our engineers are working closely with customers' requirements and deliver exactly tube furnace system matching to size and features fit to their requirements. Our tube furnaces are designed and manufactured with specified zones or chambers, whether single zone, dual zone or multiple zones and are mounted horizontally or vertically and operated with temperature ranges up to 1800°C. In addition to traditional tube furnace systems, we are also manufacturing other tube furnaces including vacuum tube furnace and rotary tube furnace systems. In many models the end of the tube does not get very hot and with this reason such models as compare to other furnace models are used commonly as they provide option to placing of different adapters on the ends.   Our tube furnaces are designed with a concept of heating a tube which is surrounded by heating elements and incorporates thermocouple. The cooling and heating rates of these tube furnaces are carried out with programmable controls. These units offer precise temperature control and excellent temperature uniformity. Construction: These tube furnaces are available in both single and dual zone configuration. As per required specifications these tube furnaces are also manufactured in both vertical and horizontal designs. Made of double walled stainless steel, the construction is durable and long lasting. Temperature: Come with comprehensive temperature range for your applications that goes up to 1800°C. As these furnace units are custom made, customers can order specified required temperature. Temperature is controlled through an independent digital temperature control (ordered separately), which has 16 programmable segments. These control systems are either integrated with tube furnace system or attached separately. Heating Elements: Depends upon the requirements these units can be supplied with molybdenum disilicide heating element or lanthanum chromite element. Heating elements are side wall mounted and tolerate rapid cycling over extended periods. These heating elements can be replaced easily by the uses and requires no matching of resistance values. Safety Features: Equipped with adjustable factory installed digital over temperature control which shuts the system off in case of over temperature or circuit failure.   Other tube furnace products: One, Two and Three Zones Wire-Wound Tube Furnaces One, Two and Three Zones Horizontal Split-Hinge Tube Furnaces One, Two and Three Zones Vertical Split-Hinge Tube Furnaces One, Two and Three Zones Large Bore Tube Furnaces One, Two and Three Zones Zone High Temperature Tube Furnaces One, Two and Three Zones Horizontal Tube Furnaces Vertical Tube Furnaces Rotary Reactor Furnaces Thermocouple Calibration Furnace As tube furnace manufacturer, exporter and supplier in India, we present standard and custom range that offers precise temperature control and long lasting performance. Our tube furnace models also come in variety of sizes and shapes depending upon applications. Discuss your custom requirements with our engineers and get the product better than expectations. We are committed to provide high quality, safe and durable systems and also export these equipment to Asia, Africa and Middle East at factory price.

• Inside Chamber Size: Dia 60x300mm(diameter2.5" x 12")
• Standard Working Temperature: 1100ºC (continuous)
• Maximum Working Temperature: 1200ºC (< 3 hrs)
• Temperature Control: 30 steps programmable and PID automatic control
• Temperature Accuracy: ± 1ºC
• Heating Element: Fe-Cr-Al resistance wire
• Working Voltage: AC 220V Single Phase 60/50 Hz (or according to your requirement)
• Max. Power: 2 KW
• Net Weight: 70 Kg

• Power: 3KW
• Max Temperature: 1000-1500 degree Celsius
• Frequency: 50-60Hz

• Power: 2.5 kW
• Voltage: 220 V
• Weight: 70 Kg
• Frequency: 50/60 Hz
• Model: PK2R-2-12TPA2
• Outside dimensions: 450X350X600 mm

Tube furnaces are designed to carry out various chemical processes under high temperature controlled condition. The Tube Furnace facilitates more sophisticated metallurgical applications. Weiber offers Single Zone to multiple zone Tube furnaces can maintain high temperature value up to 1800°C.

MLTI USE VERTICAL OR HORIZONTAL The NSW Split Tube Furnace comprise a furnace body which is mounted on vertical stand and is hinged so as to split into two halves along its length. The free standing vertical design is ideal 900 deg.c  for warp around heating applications such as extension test rings or vertical reaction tubes.  The NSW is also available as a lower temperature version with 900 deg.c maximum operating temperature.  Usually required but does not include an appropriate accessory worktube 2 ½ inch.   Standard Features   900 deg.c maximum operating temperature heated tube length of 455mm furnace split into two halves to accommodate reator vessels, large wrokpieces or samples fixed into a test rig suplied in near hinge configuration complete with stand over temperature protection from secondary controller Microprocessed PID controller having 4 ramp & 4 soak profile having set mode, alarm parameter, configuration parameter, profile parameter, set point profile, Pv error indicator, parameter for locking etc.

High Temperature Tube Furnace, Micro Processor Controlled Cooling Incubator

Vertical Tube Furnace, Hardness Software, Abrasive Cut Off Wheels

Owing to the support of our adroit professionals, we have been able to provide our clients a high quality assortment of Vacuum Tube Furnace that is equipped with air cooling system in order to reduce the temperature. This furnace is intricately manufactured by employing optimum quality raw material with the aid of contemporary technology in adherence with international quality standards. Our precious customers can avail this Vacuum Tube Furnace from us in various specifications at the most reasonable rates. Features: Excellent functionality Robust construction Corrosion resistance High performance

Tube furnaces are designed to carry out various chemical processes under high temperature controlled condition. The Tube Furnace facilitates more sophisticated metallurgical applications. Weiber offers Single Zone to multiple zone Tube furnaces can maintain high temperature value up to 1800°C.