Turbines Dealers in Rajendra Place, Delhi

Product Code: EKE 2250Pelton Wheel Turbine is only impulse water turbine now in common use named in honor of Sir L.A. Pelton (1829-1908) of California, USA. It is a tangential flow impulse turbine. The water strikes the buckets along the tangent of the runner. The energy available at the Inlet of the Turbine is only kinetic energy. The Pressure at the Inlet and Outlet of the atmospheric. This turbine is used for high heads. The Present Set-up consists of a runner. The buckets are mounted on the runner. The water is fed to the turbine, through SS nozzle with a SS spear, by means of Centrifugal Pump, tangentially to the runner. Row of water into turbine is regulated by adjusting the spear position by the help of a given hand wheel the runner is directly mounted on one end of a central SS shaft and other end is connected to a brake arrangement. The circular window of the turbine casing is providing with a transparent acrylic sheet for observation of flow on to the buckets. This runner assembly is supported by rigid MS structure. Load is applied to the turbine with the help of this brake dynamometer so that the efficiency of the turbine can be calculated. Pressure Gauge is fitted at the Inlet of the turbine to measure the total supply head to the turbine.Experiment: To study the operation of a Pelton Wheel Turbine To determine the Output Power of Pelton Wheel Turbine To determine the Turbine Efficiency Utilities Required: Water Supply and Drain. Electricity 15 kW, 440V AC, Three Phase

Extraction condensing steam turbine the extraction condensing turbines are used when a constant pressure steam flow has to be extracted for process purposes. The constructional characteristics of these turbines are very similar to condensing turbines from the second admission valve chest it is possible to inject low pressure steam, available in the plant to supply the power required by the plant. these turbines are typically used for co-generation where the turbine meets both the power and steam demand of the process plant. In these type of turbines the power generated can be maintained more or less at a steady level despite variation in process steam demands. In some cases it may be necessary to have both bleed and controlled extraction steams from the condensing turbine. These turbines are of bleed cum extraction condensing type.

Back pressure turbines are available in single stage or multi-stage options. Primarily, this kind of turbine is used as a reducing station between boiler unit and the process steam header. Back pressure turbines are commonly employed in industrial plants where a large quantity of steam is required. Their straight-back pressure nature makes them useful in applications where exhaust steam is fully utilized to meet process demands. The electrical power generated in the process is consumed as per the process steam demand. Two main applications of a Back Pressure turbine. For drive application- Popularly used in (Sugar mills, Sugar fibrizor, Shredder drive, Pump drives and so on) For power generation application- Used as to generate electricity by powering the generator. Bleed cum Back-Pressure Steam TurbinesBleed Points or uncontrolled extraction vents in steam turbines enable steam extraction within a medium pressure range. i.e Bleeding Steam is practically possible at low volume steam demands and when there is a high tolerance for pressure variations. Kessels turbines are built on both bleed and back pressure mechanism. Extraction cum Back-Pressure Steam TurbinesIf there is a need for steam extraction when the process steam demand volume is high and tolerance for pressure variations is minimal, steam turbines with one controlled extraction vent can be very effective. These work under intermediate pressure levels.

The extraction condensing turbines are used when a constant pressure steam flow has to be extracted for process purposes. The constructional characteristics of these turbines are very similar to condensing turbines From the second admission valve chest it is possible to inject low pressure steam, available in the plant to supply the power required by the plant. These turbines are typically used for co-generation where the turbine meets both the power and steam demand of the process plant. In these type of turbines the power generated can be maintained more or less at a steady level despite variation in process steam demands. In some cases it may be necessary to have both bleed and controlled extraction steams from the condensing turbine. These turbines are of bleed cum extraction condensing type.

Back pressure turbines are available in single stage or multi-stage options. Primarily, this kind of turbine is used as a reducing station between boiler unit and the process steam header. Back pressure turbines are commonly employed in industrial plants where a large quantity of steam is required.

We deal in complete range of Steam Turbine inclusive of condensing, back pressure and extraction-condensing of different output range. Our procurement agents are specialized in examining the quality and sturdy design of the Steam Turbine which is used in number of industries. The Steam Turbine supplied by us has high rotating output in order to deliver high performance. Why Our Steam Turbine? High Efficiency and Reliability Fast and easy to maintain Low emission Advanced Design and Structure

• Blade Material: mils steel
• Condition: New And Second Hand
• Country of Origin: Made in India
• Material: Mild Steel

Turbines, turbine components, Labyrinths, oil seals, Thrust Bearings

Extraction Condensing Steam Turbine, Rolling Mill Structural Services

Steam Turbines

Steam Turbine, solar thermal power plants

Turbine

Steam Turbines

Steam Turbines, water tube boilers, Steam Turbine Governors

Gas Turbine, steam turbine generator