Vacuum Tray Dryer Dealers in Delhi

Vacuum tray driers for drying of thermal sensitive materials which get easily resolved, polymerized or deteriorated under higher temperature. Heat sensitive materials can be driedat low temperatures under vacuum, since the environmental pressure is reduced below the vapour-pressure of the contained water or solvents. Oxidation or Contamination by Air is eliminated. HollowFibers, Medical Devices, Chemical Salts, Fine Chemicals, Dyes, Glandular Products, Pharmaceuticals andFood Extracts (Gluten, Glues, Pepsin), Rubber Explosive, etc. are ideally suited for drying in this manner. Drying under vacuum is also environmentally friendly because the Evaporated Solvents can easilybe re-condensed. These solvents can then either be recycled or disposed of without any problem. Temperature range upto 3500C Microprocessor based controller (HMI+PLC as an option) Dial type pressure gauge (digital pressure gauge as an option) Pressure release valve in Steam line. Doors hinged with silicon gaskets Equipped with vacuum break valve and drain valve RS 232/485 interface. (optional) Universal Digital Data Recorder system(optional) USB ports for PC connectivity (optional) Built-in timer and touch-button controls allows quick and simple temperature setting. Temperature chart recorder/printer for printing graphs(optional)

• Tray Size: 16 x 32 x 1.25 (inch)
• Insulation: Thick glass wool
• Housing Construction: Mild Steel / Stainless Steel 304 / 316 / 316L
• Compliant to CE, cGMP, FDA and other standards: Stainless steel construction (SS 316L/316/304)
• Easily removable hollow pad type heating shelves: Dedicated fluid heating and circulating systems
• Thermal efficiency of 60 to 80 per cent: Provision for Explosion Vent / Rupture Disc on body
• Provision for Validation Port on Body: Vacuum break valve provided on Chamber
• High quality interlocking for doors to chamber: Uniform heating flow
• Branded immersion heaters: Heavy duty MS / SS door fitted on hinges
• Single and double doors (for large models): Complete automation w/ PLC controls (Optional)

VTD is Box-shaped and loaded and unloaded via a door (two doors on the larger models). The Box closed by these doors which are lacked tightly to provide an air tight seal and connected to a vacuum pump through a condenser & receiver .At the pressure about 0.03 to 0.06 bars, vacuum box is operated. • The trays which are present in the dryer are used to dry the materials which are placed on the shelves and the pressure is decreased up to 30 to 60 kps by a vacuum pump. • The door is closed firmly and steam is passed through the space of jacket and shelves. So that the heat transfer takes place by the mechanism of conduction. • Be vacuum evaporation the water is taken out from the material at 25 - 30 @c. • Water vapor passes into the condenser and after drying vacuum line is disconnected then the materials are collected from the trays.

Vacuum Tray Dryer, Roller Conveyor, Screw Conveyor, Portable Screw Conveyor