Gate & Sluice Valves Dealers in Chawri Bazar, Delhi

• Size: 15
• Material: FORGED STEEL

forged steel gate valve

• Country of Origin: India
• Size: 25mm
• Type: Gun Metal Gate Valve
• Material: Gun Metal
• Application: Water Fitting
• Feature: Blow-Out-Proof, Casting Approved, Corrosion Proof, Durable, Good Quality, Investment Casting
• Pressure: High, Low, Medium

A gate valve, also known as a sluice valve, is a valve that opens by lifting a barrier (gate) out of the path of the fluid. Gate valves require very little space along the pipe axis and hardly restrict the flow of fluid when the gate is fully opened. The gate faces can be parallel but are most commonly wedge-shaped (in order to be able to apply pressure on the sealing surface).

• KSB PUMPS: IBR VALVE
• STEAM VALVE: HIGH PRESSURE VALVE
• CAST STEEL VALVE: PRESSURE SEAL VALVE

We are offering pressure seal gate valve. Ksb pumps ltd (valves division). Pr.class : 900/1500/ 2500. moc : wcb/wc6/wc9. Sizes : 50mm-600mm.

• Material: Stainless Steel
• Pressure: 25 KG
• Brand: Zoloto
• Valve Size: 8MM TO 150MM
• End Connection Type: Screwed
• Media: Air, Gas, Water
• Temperature Of Media: High Temperature, Medium Temperature, Low Temperature
• Product Type: ZOLOTO GATE VALVE
• Usage/Application: Water

• Material: Stainless Steel
• Usage: Industrial

• Material: Stainless Steel
• Application: Gas Fitting
• Application: Industrial
• Feature: Casting Approved, Corrosion Proof, Good Quality, Investment Casting
• Size: 50 to 300 DN mm
• Pressure: 104 Bar

We are the main supplier of this product.

• Country of Origin: Made in India
• Color: Black, Blue, Red
• Valve Size: 50- 600 mm
• End Connection Type: Flange
• Automation Grade: Manual
• Brand: Kirloskar
• Features: Innovative design, Superior performance, Accurate control.

• Size: 1 inch
• Color: Blue
• Material: Cast Iron
• Country of Origin: Made in India
• End Connection Type: Flange
• Surface Finishing: Paint Coated
• Usage/Application: Water, Oil, Chemical, Etc.
• Features: Innovative design, Superior performance, Accurate control.

• Brand Name: S R Metal
• Material: Mild Steel
• Color: Blue
• Pressure: 0.1 - 40 bar
• Max Temperature: 200 Deg C

• Brand Name: BELLSTONE
• Model Number: IBR- 5
• Place of Origin: Delhi, India
• Pressure: Max. BOP 250Psig. (17.58kg/cm²) at 435°F (225°C)

We are offering Sant Bronze Safety Valve Body Material cum standard : Bronze IBR Clause 282 (a) IV GrB Product Descirption : Pop type open discharge Type of Seat : Integral Type Of Disc : Renewablel Disc Trim : Cu alloy End Details : Inlet screwed male BSP Taper Threads to BS-21 Test Pressure : Tested to 500Psig. Hyd. (35.15 kgcm² (Hyd). Working Pressure : Max. BOP 250Psig. (17.58kgcm²) at 435°F (225°C)

L&T Valves manufactures a wide variety of Gate, Globe & Check Valves in bolted-bonnet design. The valves are approved by the global majors in oil & gas and power and have a reputation for reliable performance in critical services, across the globe. Valves in bolted bonnet construction are available in pressure classes from 150 to 2500, in a variety of materials and end-connections. Gate Valves API 600/ISO 10434 2" to 72" ASME class 150 to 2500 Salient Features : Body and bonnet - Cast with uniform sections, precision machined. Body : Straight through port without recesses except in the seat area - Minimum resistance to flow, turbulence and erosion. Flex wedge: Guide slots in the wedge engage with integral guide ribs in the body, Stem-to-wedge contact close to wedge centre - Better sealing, smoother operation. Seal-welded seat ring - Eliminates leakage path between seat ring and body, does not loosen up due to temperature fluctuations or vibration. Stem - One-piece construction with forged T-head - Long service life, smoother operation. Globe Valves BS 1873 2" to 24" ASME 150 to 2500 Salient Features : Body and Bonnet - Cast with uniform sections, precision machined. In-situ hard-faced body seat - Eliminates leakage path between seat ring and body. Guided plug-type disc, Free-floating stem-disc connection - Uniform seating. Check Valves BS 1868 2" to 36" ASME 150 to 2500 Salient Features: Body and Bonnet - Cast with uniform sections, precision machined. Body : Permits full swing of disc on downstream side - Lower flow resistance and disc erosion. Disc : Internally-hinged - No opening on the body, higher integrity. Disc secured to hinge using lock nut and pin. Disc free to rotate to avoid localized wear.

We are offering Spirax Pressure Reducing Valve. TYPE : DP23/DP143. MOC : CI/CS. SPECIAL : IBR. SIZES : 15-80MM.

• Material: Brass
• Size: 1/2" - 1"

Sap forged steel valves have been designed to meet the requirements of API 602 / BS 5352 / ASME B 16.34 Socket weld ends dimensions conforms to ASME B 16.11 Screwed ends dimensions conforms to ASME B 1.20.1 Outside screw and yoke construction The gland is of two piece self aligning type Back seat arrangement for Gate and Globe Valves. Valves meet the requirements of fugitive emission level Shell Category B as per MESC SPE 77/312

• Product Name: MINDA UNLOADER VALVE

7231 minda unloader valve ecel mb05010002     we deal in best quality products only. Please contact for bulk order and best prices.

• Brand Name: ATAM
• Material: Cast Iron
• Place of Origin: India

ATAM make Sluice Valves are offered in PN10 & PN16 rating in Cast Iron construction. These valves are offered with flange end connection.

• Size: 100-150mm, 150-200mm, 200-250mm, 250-300mm, 300-350mm, 350-400mm, 400-450mm, 450-500mm, 50-100mm
• Type: Gun Metal Gate Valve
• Brand Name: Zoloto, Sant
• Material: Gun Metal
• Certification: ISO 9001:2008 Certified
• Application: Oil Fitting, Water Fitting
• Weight: 10-20kg, 20-30kg, 30-40kg
• Color: Goldern
• Feature: Corrosion Proof
• Condition: New
• Pressure: High, Low, Medium
• End Connection: Flanged, Screwed
• Country of Origin: India