Vertex Scientific & Lab Instruments Co Karampura, Delhi

Product Description The Vicatronic apparatus, that is designed and manufactured using the most recent and sophisticated technology, is used for the initial and final setting time determination of cements or mortar pastes.The unit is manufactured with anticorrosion and tropicalised components to be used in places with humidity not below 90% and 20°C. controlled temperature as required by EN Specifications.The entire test is made in a fully automatic way and gives a very precise and repeatable result.The results are printed on the incorporated printer and this eliminates the manual operations of installing and zeroing the paper graph on the drum.The use of the appliance is extremely simplified by the guiding menu that is available in english, french, spanish, german, italian language. Features Automatic determination of initial and final setting time Large size 4.3″ touch screen color display LAN port direct connection to PC USB port data storage Conform to both EN and ASTM/ASTHO Customized test procedure Integrated graphic printer for printing numerical test data & setting time plot Practical in-water testing accessory (optional) Supplied complete with PC software for data processing VICASOFT-BASIC

Vicat Needle Apparatus With Dashpot Product Description The apparatus consists of a metallic frame bearing a freely movable and with a cap at top, one vicat mould and glass base plate and one set of needles one each initial needle, final needle and consistency plunger. It comes with a dashpot which facilities gentle lowering of the needles. Accessories: Mild steel base plate 5 inches x 5 inches. Fulcrum mould , brass , 80 mm i.d. base dia x 70 mm i.d. top dia , 40 mm height. Note: Normally set of needles and mould which meet is requirements as per I.S. 5513 are supplied. While ordering please specify the specification code of the instrument required.Vicat needle apparatus for determining consistency of hydraulic cement. Gypsum plaster, lime etc. As per ASTM C 187-58 C 472-62 C 110-58, IS 2542(Part-1) can also be supplied.

Tile Abrasion Testing Machine-VSLIC5024 Product Description This is used for determination of resistance to wear for Cement & Concrete flooring tiles. Tiles specimen of size 7.06 cm x 7.06 cm is pressed face-wise under specific load on a grinding path and abrasive powder is evenly spread on the rotating grinding disc the second parallel side of the tile is subjected to wear for similar number of rotations. The wear of the tile is measured on a thicknessgauge specifically made for the purpose. The machine consists of a disc rotating at a speed of 30 R.P.M. in a circular tray. A bracket is provided to hold the specimen. A counter balance lever loads the specimen. Load applied is 30 Kgf. A funnel is fitted to evenly spread abrasive powder on the grinding path. A Pre-set Counter automatically stops the machine after 22 revolutions. This counteris Re-adjustable. The machine works on 440 V A.C. Three Phase electrical supply. On request machine to operate on 230 V A.C. Supply can also be supplied.

Microlance Instant Moisture and Temperature Tester is used for the instant on-site determination of moisture and temperature of sands, aggregates, building materials, minerals and mixes from small quantities to hundreds of tons. The instrument is reliable and easy to use, taking moisture readings up to 1 meter depth by simply inserting the lance into the test material. Instant readings are monitored on the digital display and the built-in computer allows the user to monitor a wide range of materials and water contents. The Microlance is supplied with standard calibration values for sands and aggregates but it can also be calibrated for different material or mixture with the Autocalculation functionality. The unit is supplied complete with a calibration certificate. Key Features Moisture measurement with temperature compensated electric field Temperature measurement according to BS 1904 and DIN 751 Platinum resistance detector

Perforated 5-7/8″ (149mm) dia. base with adjustable stem.

Stripping Value Apparatus-VSLIC4012 Product Description Stripping Value Apparatus Bitumen and tar adhere well to all normal types of aggregates provided they are dry and are not exceptionally dusty. This problem of stripping is experienced only with bituminous mixtures, which are permeable to water. This test gives the procedure for determination of the stripping value of aggregates by static immersion method, when bitumen and tar binders are used. A circular tray rotates in a vertical plane at a rate of approximately 100 R.P.M. by an electrical geared motor. 4 bottles of approximately 400 cc are mounted on this circular tray at an angle of 900. To each other with their mouth towards center of the tray. A time switch is provided. Suitable for operation on 230 V A.C. Single Phase. Stripping Value Apparatus Bitumen and tar adhere well to all normal types of aggregates provided they are dry and are not exceptionally dusty. Thermostatically controlled water bath. Summary Bitumen and tar adhere well to all normal types of aggregates provided they are dry and are not exceptionally dusty. This problem of stripping is experienced only with bituminous mixtures, which are permeable to water. This test gives the procedure for determination of the stripping value of aggregates by static immersion method, when bitumen and tar binders are used.

Using a speedy moisture meter, the moisture content of soil, sand and other fine grained material can be obtained quickly with reasonable accuracy. The test technique is based on the fact that water will react with calcium carbide to form acetylene gas and the quantity of gas formed is directly proportional to the water present, leaving a surplus of the chemical used in the test. The quantity of acetylene gas produced is indicated on a built-in pressure gauge which is calibrated in percentage of moisture on wet weight basis. A conversion formula gives the corresponding moisture content based on dry weight.

Sokkia IM 105 Total Station-Sokkia IM 105 Sokkia IM 105 Total Station – (Intelligent Measurement Total Station) incorporates all the features you need at a cost-efficient price. It will handle your most demanding survey layout or as-built project needs. Tradition Meets Innovation 5″ Accuracy Construction and Survey Application Software On Board Best-in-Class Measuring Distance Feature Dual Side Display Control Panel. Reflectorless operation from 0.3m to 1000m. IP66 – Strong Environmental Specification against Tough Sites Integrated Bluetooth® technology Up to 28 hours of battery life in Eco mode Key buttons are illuminated to minimze mistakes. Advanced security and maintainance with TSshield™ Internal memory has 50,000 points to record.    

Sokkia IM-100 Series Total Station-IM100 Series The iM-100 (Intelligent Measurement Total Station) incorporates all the features you need at a cost-efficient price. It will handle your most demanding survey layout or as-built project needs.You get fast, accurate, and powerful EDM technology, best-in-class accuracy up to 5,000 m with a prism and up to 800 m in reflectorless mode, and a battery life of up to 28 hours. The iM-100 is ready to be your hardest worker out in the field. Technical Specification Key Features of Sokkia iM-100 Series Total Station Fast, accurate and powerful EDM Integrated Bluetooth® technology – no external antenna necessary for connectivity with the controller. Dual axis compensation Waterproof IP66 rating Up to 28 hours of battery life in Eco mode

Sokkia CX 55 Reflectorless Total Station-Sokkia CX55 The Sokkia CX-55 Total Station is a builder class instrument with an IP66 waterproof casing and reflectorless EDM technology. In addition, the Sokkia CX-50 series total station features other key specifications such as dual axis compensation, 15-hour battery life and on-board survey software capable of storing 5,000 points. These features combined with the affordable price, makes it the perfect entry-level solution for site layout or as-built survey. Sokkia CX55 Total Station Features:- RED-tech Technology Reflectorless EDM [TS_VCSC_Fancy_List list_type=”icon” marker_icon=”fa fa-check-square” marker_position=”middle” marker_color=”#0e7c10″] 5″ Accuracy Fast distance measurement of 0.9s. Sokkia’s traditional pinpoint precision in reflector-less distance measurement. Reflectorless operation from 30cm to 350m. Coaxial EDM beam and laser-pointer provide fast and accurate aiming. Ensures accuracy even with reflective sheets.

Soil Permeability Apparatus come with glass tubes of 75mm, bore tube is provided with over flow arrangement for constant head tests. The remaining tubes are used for falling head test.

Magnesium Sulphate / Sodium Sulphate Test Water Bath-VSLIC5030 Product Description Magnesium Sulphate and Sodium Sulphate Tests are used for determining the soundness of aggregates when subjected to weathering action such as freezing and thawing cycles. It should be noted that other equipment like ovens, sieves, balances etc. are also required to perform these tests.Sodium Sulphate can be used instead of Magnesium Sulphate according to the ASTM standard. Vertex Hydrometer 1100- 1200 g/ml is required for the test with Sodium Sulphate. (The temperature of test solution that is in the dipping chamber produced of stainless steel can be automatically adjusted to required temperature with the heating and cooling system.). Homogeneous temperature distribution can be obtained with the water circulation pump. The temperature controller is a microprocessor type. The Magnesium Sulphate / Sodium Sulphate Test Water Bath can be used as a general purpose water bath when the dipping cabinet is removed.

Shrinkage limit is the maximum water content at which a reduction in water content does not cause an appreciable reduction in volume of the Soil Mass. At shrinkage limit, on further reduction in water, air enters into the voids of soils and thus keeps the volume constant. The apparatus can be used to determine shrinkage limit and to calculate other shrinkage ratios, shrinkage index and volumetric shrinkage. Set consists of one each:  Porcelain evaporating dish  Shrinkage dish Glass cup  Perspex plate with three metal prongs  Flexible spatula 100mm Glass cylinder 25ml x 1ml, supplied without mercury  Plastic wash bottle 500ml Optional Accessories: Mercury supplied in Bottle of 500 gms. at an extra cost.

he Semi-Automatic Penetrometer for Liquid Limit consists of a cast iron base with course and fine leveling screws, a digital penetration measurement gauge 0.01 mm resolution/readability and an automatic penetration timer unit. The is equipped with a digital, 99 second timer, which can be set to the standard 5 second free-fall time or to some other setting for customized tests. When engaged the timer will allow the needle to free fall into the sample for the specific time interval and then lock the needle from advancing while providing a direct reading of the test results 320 g weight should be added to the 30° angle cone to get a total weight of 400 g for the shear strength test. Semi-Automatic Penetrometer for Liquid Limit supplied complete with: Automatic Penetration Timer Unit 30° Penetration Cone Sample Cups, 3 pcs. Aluminium, Ø55 mm x h:35 mm. Semi-Automatic PenetrometerAutomatic Penetration Timer Unit30° Penetration ConeSample Cups, 3 pcs. Aluminium, Ø55 mm x h:35 mm.Best Quality Machine

Safety Helmet-VSLIC8007 Safety Helmets that are essential for head protection during construction jobs and mining process. Safety Helmets are fabricated using robust material that are capable of withstanding harsh conditions and provide optimum safety to the users from any kind of injuries. Suitable for construction works, material handling, mining, sand blasting, ports etc. Made with hard PVC.

Red PVC Non Reflective Traffic Safety Cone Supplied in a pack of 10 cones.

Consists of mould 100 mm x 5mm. Deep and a glass base plates. Used to determine soundness of hydrated lime

Reflux Extractor 4000 Gms-VSLIC4010 Product Description The simple apparatus working on the same operation principle of consisting of cylindrical glass jar supporting two metal cones of stainless steel cloth and a metal condenser on top of the jar. Supplied complete with 100 filter papers & wire gauge, Hot Plate.

Quantab Chloride Titrators are used for quick determination of water soluble chloride salts present in soils and aggregates. It is based on the Volhard Method. Covers 0.005% to 0.1% NaCl and TA-0872 covers 0.05% to 1% NaCl.

Protective Caps For Rebar, Pipe, Bolts Specification: Used to minimize possible accidents to protect both employees and equipment. Reusable Weather resistant Brightly colored for good visibility Available in two sizes Model No. Rebar Size Package Qty.VSLIC 8006-A #3-#8 200VSLIC 8006-B #7-#18 50

Moisture contents at which soil has smallest plasticity is called limit. For determination purpose plastic limit is defined as the water content at which a soil will just begin to crumble when rolled in to a thread of 3mm dia. Specification:- The complete set consists of one each : Glass plate 20cm x 15cm having round ends Brass or stainless steel rod 3mm dia x 150mm long Flexible spatula 15 cm Set of 6 moisture containers Porcelain basin 150mm dia  Plastic wash bottle 500ml Note:- Glass Plate size 500 x 500 x 10mm can be supplied at an extra cost.

Leica FlexLine TS06plus Total Station-LeicaTS06+ The Leica Flexline TS06plus Total Station delivers measurements which are extremely precise from a selection of Electronic Distance Measurements (EDM) options. Specifically designed for applications of medium accuracy it comes with easy setup with a laser plummet and guided process at start-up. The ergonomic key layout and large display provides error-free data input and makes operation simple. Features of the Leica Flexline TS06plus Total Station include a built-in easy to use alpha numerical keyboard for fast entry of numbers, special characters and numbers. This not only increases speed and productivity but also minimises errors. The Flexline TS06 Communication Side Cover allows for connections to any data collector via a cable free Bluetooth connection. It is ideally used with Leica Viva CS10 or Leica CS15 using SmartWorks software. The USB functionality gives transfer flexibility of data files including GSI, ASCII, DXF, CSV and more. The Flexline TS06 also has a large internal memory and can store up to 100000 fix points and 60000 measurements. This Total Station uses Lithium-Ion batteries for long life, fast charging and an operation time of 30 hrs. The Flexline weighs 5.1kg including the GEB211 battery and tribrach. It’s container is light, tough and keeps the instrument with all the accessories dust and waterproof. The Leica Flexline TS06 comes with Leica Geosystems mySecurity which locks the instrument and disables it so it can no longer be used should it be stolen. Features The Leica FlexLine TS06plus represents today’s most used type of manual total station in the mid-range market. It provides a wide range of standard features making operation simple. Quality, precision & reliabilityFlexLine plus total stations are built to the highest Swiss Technology quality standards. Users benefit from high precision and reliable instruments in order to fulfil their tasks with the requested accuracy. Best-in-class EDM technologyWith PinPoint Electronic Distance Measurement (EDM), TS06plus delivers the optimal balance in: Range Accuracy Reliability Beam visibility Laser dot size Measurement time With a wide variety of EDM options, the TS06plus delivers measurements which are extremely precise. Intuitive onboard softwareThe TS06plus is delivered with the intuitive onboard software, Leica FlexField plus. Guided workflows and easy to understand graphics and icons ensure a low learning curve when working in the field. Graphics and icons make the interpretation of measurement values or text no longer necessary, guaranteeing faster and simple operation when you need it. Flexible data exchangeThe TS06plus is equipped with a communication side cover where data can be easily transferred using a USB stick. Built-in wireless Bluetooth for cable-free connection allows connections to any data collector. Best-in-class service & supportFlexLine plus manual total stations are supported by superior after sales service and support. With the Active Customer Care program and myWorld customer portal, users have access to latest software updates, service and support as well as the mySecurity theft protection system. With mySecurity activitated, the locking mechanism ensures the device is disabled and can no longer be used. Efficient tunnel surveyingLeica Geosystems now offers a powerful Tunnel Application for its FlexLine manual total station series. With a wide range of functions that cover design, execution process, and compute cut and fill areas, the app now enables you to have full control in tunnels, caverns and infrastructure galleries.

Leica Flex Line TS02 Plus Total Station-LeicaTS02+ The successful Leica FlexLine TS02 plus benefits from a best-in-class large high-resolution display that’s complemented by the graphical easy-to-use FlexField plus onboard software. It is designed for standard measurement tasks, including a set of field application software for daily work. Whenever high distance measurement is required, you can face the challenge of this demanding task with the TS02plus. It offers the most accurate Electronic Distance Measurement in its class. Leica TS02 Plus Total Station Features:- Leica Quality Proven specifications Reliable instruments Highest EDM precision [/TS_VCSC_Fancy_List] Intuitive FlexField software Low learning curve due to guided workflows Easy to understand graphics & icons Icons to quickly verify instrument status Faster operation due to graphics

Borosil-Scientific, Industrial & Laboratory Glassware We are supplier of BOROSIL® range of Laboratory Glassware includes almost all items required in general lab usage. Borosil® expertise in melting and forming low expansion, chemically inert borosilicate glass for over 50 years has made Borosil® products preferred globally. In fact, for a laboratory to get ISO 9001 certification in India, it is recommended that it use BOROSIL certified A-class lab glassware. Borosil® apparatus for measurement of volumes rank amongst the most accurate in the world. When it comes to laboratory glassware equipment and lab glassware supplies for scientific laboratories, we are one of the largest suppliers of Borosil® Glassware Accuracy Computer Controlled Calibration. Reliability in experiments through individually certified volumetric glassware. Facilitatate audit procedures in the laboratory. Enhanced production from new facility.