Vibrating Machine Dealers in New Rohtak Road, Delhi

• Automatic Grade: Automatic
• Power: >6 kw
• Brand Name: Steco
• Application: Industrial
• Material: Stainless Steel
• Phase: Three Phase
• Vibrating Range: 2 To 5 mm

• ACCESSORIES: i) Flat Belts ii) Set of Springs.

The machine is used for compaction of 70.6mm cube specimens of cement mortar under standard vibration required for determination of compressive strength of cement. The vibration machine consists of a frame mounted on four coiled springs to carry a cube mould and an eccentric revolving shaft mounted in ball and roller bearings. The machine is so balanced that the eccentric imparts simple harmonic motion to mould carrier and the mould. The frequency of vibration is 12000 ± 400 R.P.M. per minute. The drive from the motor to the eccentric shaft is through an endless flat belt running on crowned pulleys. Suitable for operation on 220 V, 50 Hz, single phase power supply.

• Automatic Grade: Semi-Automatic
• Material: Mild Steel Body
• Portable: Yes
• Operation Mode: Electricity
• Type of Dental Equipment: Dental Vibrator
• Size: Standard

Vibrator (Ministar) with heavy duty performance and use in dental clinic and laboratory. Fitted with three speed switch.

• Driven Type: Motor
• Power: 1Kw
• max weight: 250 kg
• Automatic Grade: Automatic
• Voltage: 220 V
• Frequency: 50 HZ
• Usage/Application: Cement Testing Machine
• Material: Mild Steel
• Phase: Single Phase

Also called Mould Vibrator Or Mortar Cube Vibrator.Concrete moulds are easily cast by using a tamping bar or a vibrating table. However air tapped in cement mortar paste can not be thus removed while casting cement mortar moulds. Easy method is to impart greater vibration of lesser amplitude to the mould while casting. This is achieved in a vibrating machine. Vibration machine is used for the preperation of mortar cubes for the determination of compression strength of ordinary and rapid hardening Portland cement, low heat portland cement, portland bleast furnace cement and high alumina cements.The machine consists of a vibrating frame assembly and an electric motor mounted on a sturdy base. The complete frame assembly consists of a vice to hold a 7.06cm cube mould and two studs threaded at top and a hopper to feed the sample in the mould. This assembly is supported on four springs and has an in built rotating shaft which rotates eccentrically and thus imparts vibrations to the entire frame. A balance weight is an intergral bottom part of the frame. The centre of gravity of the assembly is brought to the centre of the eccentric shaft or within a distance of 25mm mould. The frequency of vibration is 12000 400 vibration per minute. Supplied complete with on 7.06cm cube mould with loose base plate, a time switch 0-5mins x 1min and certificate of vibration from a standard laboratory.Spares : Set of Springs, Belt and Belt guard.

The vibrating machine consists of a vibrating frame assembly and an electric motor mounted on a sturdy base. The complete frame assembly consists of a vice to hold a 70.6 mm cube mould and two studs threaded at top and a hopper to feed the sample in the mould. This assembly is supported on four springs and has an in built rotating shaft which rotates eccentrically and thus imparts vibrations to the entire frame. A balance weight is an integral bottom part of the frame. The centre of gravity of the assembly is brought to the centre of the eccentric shaft within a distance of 25 mm below it. The electric motor drives the shaft of the frame and thus imparts required vibration to the moulds. The frequency of vibration is 12000 +/- 400 Vibration Per Minute. Supplied complete with on 70.6 mm Cube Mould with loose base plate, a time switch 0-5mins x 1mm. Spares: Set of springs, belt and belt guard. Optional: Digital Preset Timer can be supplied at an extra cost.

Concrete moulds are easily cast by using a tamping bar or a vibrating table. However air tapped in cement mortar paste cannot be thus removed while casting cement mortar moulds. Easy method is to impart greater vibration of lesser amplitude to the mould while casting. This is achieved in a vibrating machine. Vibration machine is used for the preparation of mortar cubes for the determination of compression strength of ordinary and rapid hardening Portland cement, low heat Portland cement, Portland blast furnace cement and high alumina cements.

we are offering vibratory finishing machine. we are one of the established names of the industry engaged in supplying a qualitative range of vibratory finishing machine. customers can avail these machines from us in variegated sizes and specifications as per their specific requirements. with the aid of our dedicated quality controllers, we ensure that only defect-free components are dispatched to the clients' end. used for: de-burring polishing de-scaling surface improvement general purpose work continuous processing inspection features: efficient removal of process fluid for best surface finish all internal welds ground smooth bowls shot blasted before and after polyurethane lining for painting anti rotation motor locking plate provided additional features: complete polyurethane lined bowl including separation area complete polyurethane dam flap to avoid metal contact instead of metal flap polyurethane corrosion resistant paint for longer life in acidic /alkaline environments accident proof media outlet design for total safety benefits: economical full automation capability better media/parts mixing owing to its cascade and circular action vibratory bowl with automatic separation specifications: model processing volume in litre motor power (hp) bowl o.d.(m.m) bowl chamber width(m.m) se-75 75 1.0 850 220 se-150 150 2.0 1050 270 se-200 200 2.5 1150 300 se-300 300 3.0 1350 350 se-600 600 7.5 1500 400

We make available Vibrating Machine which is being widely used for the preparing of mortar cubes to determine the compression strength of cement. Our Vibrating Machine is specially designed for vibrating mould mix efficiently. The Vibrating Machine is simply designed and developed with an intelligent assembly of cube molds. Our Vibrating Machine is being widely utilized by many important industries comprising of Transportation, Mining and Construction Industries for its high efficiency and durability. Features Highly ReliabilityExcellent efficiencyMinimum noiseDurabilityEasy maintenanceMaximum screening capacityScreen body resistant to vibration Applications Of Vibrating Machine Mining IndustryConstruction IndustryTransportation IndustryEnergy plants Components Of Vibrating Machine A vibrating frame assembly An electric motor mounted on a sturdy base. The complete frame assembly consists of a vice to hold a 7.06cm cube mould and two studs threaded at top and a hopper to feed the sample in the mould. The assembly is supported on four springs and has an in built rotating shaft which rotates eccentrically and thus imparts vibrations to the entire frame. A balance weight as an integral bottom part of the frame. An electric motor, having frequency of vibration = 12000 +- 400 Vibration per Minute, to drive the shaft of the frame and impart required vibration to the moulds. The electric motor is accompanied with a 7.06 cm Cube Mould having a loose base plate and a time switch 0-5mins x 1mm.

Vibrator Machine

Vibrating Machine, Scientific Instruments, concrete moulds

mould vibrating machines, vibrating machines, mortar cube vibrating machines

Electric Motor Vibrators, Builder Hoist, Concrete Mixer Machines

Vibratory Finishing Machine, Hardness Software, Abrasive Cut Off Wheels