Vishal Pipes Limited Pitampura, Delhi

Welded Steel Tubes For Water Wells & CasingSize Ranges : 114.3 mm(Min) to 273.1mm(Max)Grade : Fe-410Specification Code : IS-4270:2001 Features : Rigid construction Made using sophisticated machinery Corrosion resistant Available in different sizes and shapes as per clients requirement

Grade : Fe-410

ERW Steel Tubes For Water Gas And SewageSize Ranges : NB 168.3 mm(Min) to 273.1 mm(Max)Grade : Yst 275,330 & 410Specification Code : IS-3589:2001Advantages : As only the edges are heated ,the tube possesses dean accurate surface Electric resistance welding can make tubes in sizes upto 0.4 metre diameter Major factor is economy & especially in low pressure application

Grade : Yst 275,330 & 410

uPVC Pipes For Potable Water SupplySize ranges : CLASS 1-90 to 250mm, CLASS 2 & 3-63 to 250 mm CLASS 4 & 5-40 to 250 mmGrade : PN 2.5 TO PN 12.5Specification : IS-4985:2000 Advatages : uPVC is a thermoplastic material so is very resistant to pH corrosion. uPVC is not conductive ,and therefore is not susceptible to galvanic corrosion. No painting required. Very smooth (inside & outside surfaces),So Lower Frictional losses. Does not support bacterial growth. Most economical in installation Maintenance free.  

Grade : PN 2.5 TO PN 12.5

uPVC FittingsSize ranges : CLASS-90 to 250 mm CLASS 2 & 3 -63 to 250 mmGrade : PN 2.5 TO PN 12.5Specifications : IS-10124:1988 Advantages : Economical No leakage Resistant to chemical Lightweight Continuous flow Easy to install ,Repair,Replace Prevent bacterial growth Resistance to chemical

Standard : PN 2.5 TO PN 12.5

uPVC Conduit PipesSize ranges : CLASS – LIGHT & MEDIUM (20mm to 50mm)Grade : L,M & HSpecification : IS-9537 (PART-3)/1983 Advantages : Cost Effective Inside surface is smooth ,so wires can be pulled in them very easily. Light in weight Resistant to chemical attack High tensile & Impact strength Long Life. Corrosion resistant Fire resistant  

Grade : L,M & H

uPVC Casing Pipes For Water WellsSize ranges : RMS DN40 to 200, EXCLUDING DN115 CM 40 to 200, EXCLUDING DN115 CS DN150 to DN200Grade : CM,CS & RSSpecification : IS-12818:2010 Advantages : uPVC is a thermoplastic material so is very resistant to pH corrosion. uPVC is not conductive ,and therefore is not susceptible to galvanic corrosion. No painting required. Very smooth (inside & outside surfaces),So Lower Frictional losses. Does not support bacterial growth. Most economical in installation Maintenance free.

uPVC is a thermoplastic material so is very resistant to pH corrosion. uPVC is not conductive ,and therefore is not susceptible to galvanic corrosion. No painting required. Very smooth (inside & outside surfaces),So Lower Frictional losses. Does not support bacterial growth. Most economical in installation Maintenance free.

This is line if products are available in Square and or Round tube steel. All towers are hot-dipped galvanized and are available in various heights from 20 to 80 feet. All designs are engineered to tilt down the ground level making maintenance ease a priority. This product meets and exceeds rail industry standards and tamper resistant with our lack in position feature. VPL can also provide other various sizes upon request and look forward to providing a proposal to fit our customer demand.  

Swaged Type Steel Tubular Poles Size ranges : 410SP-1 to 410SP-60Grade : Fe-410Specification : IS-2713 (PART-1 TO 3) The product, our Swaged Pole for Lighting suitable for use in a variety ofis designed to be used with or without bracket arm. The swaged pole range is also available in Solar Post Top arrangement. This pole is available with a maximum nominal mounting height of up to 10 metres, to be installed as foundation flange plate type or direct planting type. The bracket arm can be either in single or double con figuration with maximum span of up to 2.0 metres. The product specification herein represents the standard range, but other heights and section sizes can be custom designed to meet specific requirements. Features :  High quality attractive construction  Easy to Transport  

The product, our Swaged Pole for Lighting suitable for use in a variety ofis designed to be used with or without bracket arm. The swaged pole range is also available in Solar Post Top arrangement. This pole is available with a maximum nominal mounting height of up to 10 metres, to be installed as foundation flange plate type or direct planting type. The bracket arm can be either in single or double con figuration with maximum span of up to 2.0 metres. The product specification herein represents the standard range, but other heights and section sizes can be custom designed to meet specific requirements. Features : High quality attractive construction Easy to Transport

The product, our Swaged Pole for Lighting suitable for use in a variety ofis designed to be used with or without bracket arm. The swaged pole range is also available in Solar Post Top arrangement. This pole is available with a maximum nominal mounting height of up to 10 metres, to be installed as foundation flange plate type or direct planting type.

Steel Conduit Pipes (Light,Medium & Heavy) Size ranges : Outer Dimension (20 mm OD to 50 mm )Grade : Yst 210,240, & 310Specification Code : IS-9537 (PART-2)/1981 Advantage : Electromagnetic Interference (EMI) shielding Competitive life-cycle costs. Physical protection of conductors: Chemically compatible with concrete. Coefficient of expansion compatible with common building materials. Proven equipment grounding conductor. Non-combustible Recyclable. High tensile strength. Adaptable to future wiring changes.  

Grade : Yst 210,240, & 310

Hollow Steel  Section For Structural Use( Square & Rectangle Tubes) Size Ranges Square : (20 mm X 20 mm),(25 mm X 25 mm), (32 mm X 32 mm),(38 mmX 38 mm), (40 mm X 40 mm),(48 mm X 48 mm),(50 mm X 50 mm),(60 mm X 60 mm), (72 mm X 72 mm),(80 mm X 80 mm)Rectangle :(20mm X 40 mm), (25 mm X 50 mm),(25 mm X 75 mm),(33mm X 60 mm), (40mm X 60 mm), (40mm X 80 mm)Grade : Yst 210,240, & 310Specification  :  IS-4923:1997Features : Uniform Strength Excellent resistance to torsion Very efficient shape Durable  Reliable  Cost Effective   Applications Areas: Widely applicable of square and rectangular Hollow Section Pipes & Tubes are utilized for weight control and high stress resistance. Our structural tubes are applied in lifting and load handling systems and as components of lift arms (batten and tower mast) in mobile cranes, marine cranes, sea port cranes, rocket and spaceship launch tower and other super structural areas. Sizes other than mentioned above can also be produced upon specific requirements.

Vishal Pipes Ltd. is a leading manufacturer of communication towers, VPL engineers and manufacturers guyed towers, self-supporting towers, monopoles, Tower components & HF antenna systems. Services include tower analysis, tower inspection, Turnkey installation and tower modifications. Self-supporting towers have solid rod legs with bold together flanges and bold on angle iron cross bracing. All towers are hot dipped galvanized & include the following. Anchor bolts and templates, assembly bolts, climbing step bolts, safety climb device, grounding kits with lightning rods assembly drawing and foundations designs (geotechnical report by others). Several sizes are in stock for immediate shipment dependent upon your loading requirements.

Wallform system of steel shuttering compromise of standard panels manufactured out of 12 gauge M.S Sheets with slotted 50 X50 X5 M.S.,angle/M.S Flat Frame and Stiffenet,Channel or Heavy duty soldiers, Tubular or channel Walers, all these components are assembled togetherby different types of clips of unique design.Soldiers supplied in 2.5 M and Pannels in 1.25 M heights. For high pour concreting,special soldiers in 3.5 & 5 M are also supplied. For curved walls,flexible panels are used instead of wallform panels.For single sided shuttering heavy heavy duty soldiers used instead of channel soldiers and double loops used of wall ties. Wallform set up assembly shown is ready for 2 pour with soldiers remaining in the same pour. For successive pour,complete assembly of panels,soldiers and wallingsis lifted in the convenient lengths by crane or other lifting tackle,the tie bolts having been previously removed,it is re-positioned with 125 mm lap over previous pour and soldiers rebolted to ties cast in previous pour which withstand self weight of shutter and concrete pressure.

Its unique qualities of being fastest economic ,versatile & safe make its use universal and irresistible .Its Fabricated out of requisite grade virgin steel i.e. 40 NB ‘B-Class’ ERW Steel Tubes. The connection point is set at 500/1000 mm intervals .To handle the hazards of rough site handling malleable cast iron is used to cast out mobile captive cups and the bottom cups are of high quality virgin H.R Sheets duly welded to MS Steel Tube .Loose or Welded joint Pins are provided for strong and hassle free bonding between Vertical (Standard) members. These verticals are then joined with identical fit in Horizontal members having forced end ledger blades to slide into the cups of the verticals.  

The cuplock has an innovative and effective replacement in the form of Wedgelock .The wedgelock system is an advanced form of scaffolding where there is a four-way moveability and minimum chances of loose movement. The bottom cups are replaced by V-shaped steel pressings and they perform the dual purpose of Transom units as well.  

Monopoles are single members self-supporting structures used in urban areas where space is limited. These steel-tapered poles are designed to carry communication equipment such as microwave, cellular, PCS, ESMR and two-way antennas.  

Axiom Exim Pvt. Ltd. is a manufacturing venture of “VPL Group” under the brand name “VPL INDIA” which deals in Energy Efficient Lighting Product and Electrical Appliances. Axiom Exim Pvt. Ltd. is a company incepted with the sole idea to deliver the best quality LED Products with latest economical technology to the general masses. Our company is based on the concept of make in India. All the products have been developed in house with our very own experienced R&D department with world leading LAB infrastructure. Each of our R&D person is dedicated with the sole motive that is to provide international quality products for world wide customer base. Come and Join this quality revolution. Axiom Exim Pvt. Ltd. has completed NSIC registration which includes all type of Indoor and Outdoor light fitting like LED Bulb, LED Tube, LED Light Fitting, Solar LED Light Fitting. Geyser and all other accessories in very short duration.

Just like Verticals,Horizontals are also available in varied sizes of 2.00,1.80,1.50,1.25,1.20,1.00,0.915,0.60 and 0.50 Mtrs. The horizontal members welded forged ends are fabricated out of 40 NB ‘B-Class’ ERW Steel Tubes.  

We strive hard to generate top quality products to fulfill the overreaching demands of our esteemed clients. We have steadily grown into one of the key players in the manufacturing of comprehensive range of top quality Hollow Sections. We develop and produce best quality square hollow section that has been designed to perfection. Our products are offered at impressive prices without any compromise in quality. Our globally renowned and fully featured hi tech plant and use of advance quality raw materials has made us one of the affluent Structural Hollow Section Manufacturers and Suppliers in India. Our vintage performance has set us right at the top in our endeavor to provide best quality engineering and construction products.

Hdpe Sprinkler PipesSize ranges : 32mm – 110mmGrade : PE-63,80,100 PN 2.5 TO 12.6Specification : IS-14151 (PART-2) Advantages : Excellent corrosion and chemical resistance High flow characteristics Light in weight Excellent flexibility combined with strength. Hence, easy to handle and transport Good abrasion resistance Smooth inner walls minimizes frictional losses Hygienically safe hence appropriate for water supply Application For Agriculture Use Sprinkler irrigation system Lift irrigation plan Drip irrigation Fulfillment of all water needs in all the tropical and critical climatic condition.

Grade : PE-63,80,100 PN 2.5 TO 12.6

Hdpe Pipes For SewageSize range : 110mm – 450mmGrade : PE-63,80,100 PN 2.5 TO 12.5Specification : IS-14333-1996 HDPE Pipes : Number one choice for water & Sewerage Application:- The exceptionally smooth & non-porous bore of plastic pipes gives more flow per metre head/mm bore,when compared to ductile iron pipe. Superb corrosion & chemical resistance is another advantage shared by HDPE pipes. In Sewer pipes corrosion can occur because of chemical reactions caused by the biological production of sulphuric acid. HDPE pipe will not corrode, tuberculate or support biological growth. The pipes also offer a high level of chemical resistance to a wide range of substances found in both effluent and contaminated soils,making them the material of choice in harsh chemical environments. Freedom from corrosion ensures that hydraulic characteristics are superb & will remain so,minimising water losses & pumping costs over the lifetime of the system.

Grade : PE-63,80,100 PN 2.5 TO 12.5

Hdpe Pipes For Potable Water SupplySize ranges : 110mm – 450mmGrade : PE-63,80,100 PN 2.5 TO 12.5Specification : IS-4984-1995Advantages : Zero leaks Corrosion & Chemical Resistant Best for environment Lightweight & Flexible.  

Grade : PE-63,80,100 PN 2.5 TO 12.5