Vortexer Dealers in Delhi

Ideally sized for personal use, the Grant-bio PV-1 vortex mixer is compact, with a low profile and small footprint, to sit in almost any location. The PV-1 is so small that it will fit in your hand - yet there is no compromise on performance. The reliable motor produces regulated and reproducible agitation throughout the speed range. It is also extremely quiet. With variable speed from 750 to 3000 rpm, the PV-1 can be used for gentle through to vigorous mixing and pellet resuspension in 0.5ml, 1.5ml, and 15ml tubes. Adjustable speed control: 750 to 3000 rpm 'Continuous' or 'touch' operation For tubes up to 20 mm diameter Pressure sensitive cup accommodates tubes up to 20mm diameter Reliable and extremely quiet motor produces regulated and reproducible agitation throughout the speed range Extremely easy to operate - select either 'continuous' or 'touch' operation and turn the knob to adjust the speed from 750 rpm to 3000 rpm In 'touch' mode, agitation starts in response to pressure on the pressure sensitive cup. Exceptionally compact with a low profile and small footprint - fits into almost any location Rubber suction pads hold tight to the work surface and prevent the unit from 'walking' - they also absorb vibration and prevent its transmission to the workbench

It is useful for rapidly mixing/agitating solution in test tubes. The vibrating neoprene rubber cup accommodates a variety of sizes of test tube/flasks. Short, rapid, eccentric stroke, motor driven Neoprene cup imparts vigorous agitation to tubes or small flask held in or against it. The shaker is particularly efficient for dislodging sediments from tips of centrifuge tubes. The housing is 150 × 150mm approx. The Vacuum Rubber pads are provided at bottom. Machine supplied with complete with speed control, cord and ON/OFF switch and indicator to work on 220V, Single phase, 50 Hz. AC supply.

• Material: Metal
• Surface Finishing: Polished
• Application: Industrial
• Size: 160 (W) x 190 (D) x 115 (H)
• Weight: 3.0 Kg.
• Durability: Long Life
• Drive Type: Electric
• Mains Input: 230V / 50Hz | 110V / 60Hz A.C. Supply
• Net Speed: 0 - 2500 RPM (Variable)
• Operation Modes: Touch Or Continuous
• Resistivity: Rust Resistant

• Speed Range: 0-3000 RPM
• Voltage: 200-240/115/110V Compatible
• Frequency: 50/60Hz
• Operation Mode: Continuous / Touch Operation
• Type of Movement: Orbital
• Orbital Diameter: 6mm
• Speed Display: Scale
• Permissible Ambient Temperature: 5-40 Deg C
• Permissible Relative Humidity: 80%
• Protection Class According to DIN EN 60529: IP21
• Power: 36W
• Motor Rating Input: 30W
• Motor Rating Output: 15W
• Dimensions(WxHxD): 107x146x166mm
• Weight: 3kg

• Voltage: 220V
• Automation Type: Semi-Automatic
• Brand Name: U-Tech
• Material: Mild Steel
• Power: Up to 20kW

Useful for stirring centrifugal tubes, test tubes or small flasks. Fitted with a Neoprene rubber cup mounted eccentrically on the shaft against which at its is held the tube with its lower end pressing against the cup. Mixing action is controlled by varying the angle and pressure of the tube against The cup. Fitted with speed control arrangement. To work on 220/230 volts A.C. Supply.

Swirlex is suitable for touch or continuous operation. Swirlex vortex shaker is used for gentle mixing to vigorous resuspension of cells biological and canonical liquid components in tubes using eccentric mechanism. Swirlex has a wide speed range of 0-2500 rpm Built from sturdy cast casing. Swirlex vortex shakers  contains specially designed silicone feet and steel base excellent for damping vibration. Swirlex is eccentric with oil less ball bearings.

• Weight: 3.0 Kg. Net

The Vortex Mixer is designed ideally to suit application like enzymatic and RIA assay applications, atomic absorption sample preparation and Nelson's assay for reducing sugars. The equipment is designed to mix liquids via electric motor consists of a drive shaft fixed vertically in the equipment attached with a copper rubber piece mounted, in which the tube can be placed and the liquid inside the tube can be mixed uniformly. The speed of the vortex mixer can be set manually as per the need.

Roch Mechatronics Inc. introduced world's best Vortex Shaker. It is useful for accelerated mixing of solutions in test tubes, small flasks or centrifugal tubes etc. The housing is 150 x 150 mm. The speed is regulated by a speed control device. Short eccentric stroke motor imparts vigorous agitation to the tubes or flasks. Body is strong and finished in stoving enamel paint. The equipment is workable on 220 V AC 50 HZ single phase  

• Brand: Borosil
• Model Name/Number: Bhrmi 1.0
• Variable Speed Setting: 2800 RPM
• Operating Modes: Continuous
• Orbital Diameter: 6 mm
• Unit External Dimension (W x D x H): 132 x 160 x 180 mm
• Power consumption: 55 W
• Current consumption: 0.6 Amp

• Model: AMI0102003
• Stirring Position: 1
• Set-up Plate Dimension (mm): Φ 135mm
• Set-up Plate Material: S.S with ceramic coated
• Motor Type: DC motor
• Max. Stirring quantity (H20) (L): 5
• Max. Stirring Bar (L x Φ, mm): 55*10
• Motor Rating input (W): 3
• Motor Rating output (W): 2.5
• Speed Range (rpm): 100-1500
• Speed Display: LED
• Heating Output (W): 600
• Heating Temperature Range (°C): Room Temperature -280
• Temperature Display: LED
• Temperature Display Accuracy (°C): ±0.1
• Safety Temperature (0C): 50-320
• Extermnal Teperature Sensor: PT1000
• Control accuracy with external temperature sensor PT1000 (0C): ±1
• Hot Surface Warning: 500°C
• Permissible Ambient Temperature (°C): 5 - 40
• Permissible Related Humidity: 80%
• Protection class according DIN EN 60529: IP 42
• Voltage (VAC): 200-240/100-120
• Power (W): 630
• Dimension (W x D x H, mm): 268 x 160 x 85
• Weight: 1.8 kg

•  Working Diameter:  4mm
•  Make:  BIO GENE
•  Model:  VMT-2500 Multi-Tube Vortex Mixer
•  Speed range:  500-2500rpm
•  Speed accuracy:  ±50rpm at 2500rpm
•  Timing range:  1.0 Min - 9999min
•  Maximum load:  5kg
•  Panel:  311x184 mm
•  Weight:  21.5kg
•  Power:  100-230V 50/60Hz 60W

• Support various test tube sizes: Offer smooth and instant vortexing
• Compatible with incubator and cold rooms: Spill-proof electronic controls
• Powerful Motor for Instant vortex: Suction cup feet prevents from slipping
• Touch and continuous modes: Flexibility with a broad range of accessories

Bionics Scientific has developed a nice selection of laboratory vortex mixers that feature noiseless orbital movement of the rubber cup and many accessories /attachments. Often known as vortex shaker or vortex mixture, these instruments come with fixed and adjustable (variable) speed range up to 2800 rpm. Our vortex mixer shakers are designed to perform most of mixing requirements required in laboratories. The direct motor drive design makes these instruments more compact and portable. Each model comes equipped with a specific speed range model BST/VM-501 features two modes of operation; touch mode at 2800rpm for quick mix and larger tubes; continuous mode for continuously mixing at lower rpm (1000rpm). In this case, users do not need to worry about adjusting the speed when used in continue mode, avoiding the spin off the sample adapter during operation. This vortex mixer comes with standard rubber cup for the touch stirring and a plastic adapter which can use different foam format. Customers may also order different foam types with different types of vials as mentioned below.   Bionics Scientific is a vortex mixer manufacturer in India. The company offers its customers to choose from available standard models with number of optional accessories that include rubber cup, plate adapter with rubber disc and foam with different sizes of wells. All these vortex mixer shakers are supplied all over India and overseas at very reasonable price and of course with excellent warranty.    

A variable speed mixer that accommodates a variety of tubes for various analysis to eliminate time consuming hand mixing. Holding tube against vibrating rubber cup does rapid mixing of contents of tubes, Continuously variable speed regulator controls the degree of vibration. A new unique touch feature operates the unit as soon as the Tube is slightly pressed on the rubber cup. Suitable for 25,50 & 100 ml tubes.  

Located in Delhi, we are one of the top manufacturers and suppliers of Lab Vortex Mixer.  This consists of a vibrator that can agitate liquids in test tubes for quicker reactions.  This is also used to remove sediments from the tips of centrifuge tubes.  It is available in different sizes to suit the varied needs and requirements of our clients. These mixers can be availed from us at affordable rates.  Details : Model No. : AM-022 Useful for rapidly mixing/agitating solution in test tubes. The vibrating neoprene rubber cup accommodates a variety of sizes of test tube/flasks. Short, rapid, eccentric stroke, motor driven Neoprene cup imparts vigorous agitation to tubes or small flask held in or against it. Particularly efficient for dislodging sediments from tips of centrifuge tubes. The housing is 150 × 150mm approx. The Vacuum Rubber pads are provided at bottom. Machine supplied with complete with speed control, cord and ON/OFF switch and indicator to work on 220V, 1Ph, 50 Hz. AC supply.

• Dimension: 127 x 130 x 160 mm
• Specifications: IG-VMS
• Max Speed: 2500 RPM
• Orbital diameter: 4 mm
• Motor type: Brushless DC
• Max Load Capacity: 200 gm
• Speed accuracy: ± 5%
• Different modes Touch, Stand by & Continuous mode: Touch, Stand-by & Continuous mode
• Power Supply: 220 - 240VAC, 50Hz
• Ambient Temperature: 5 to 40 Degree C
• Weight: 3.5 kg
• Inclusions: Universal Adaptor
• Optional Attachments (not included): Universal platform for attaching either microplate or microtube or flask Attachments

• Power Supply: 220 / 230 Volts 50 Hz

Bionics Scientific has developed a nice selection of laboratory vortex mixers that feature noiseless orbital movement of the rubber cup and many accessories attachments. Often known as vortex shaker or vortex mixture, these instruments come with fixed and adjustable (variable) speed range up to 2800 rpm. Our vortex mixer shakers are designed to perform most of mixing requirements required in laboratories. The direct motor drive design makes these instruments more compact and portable. Each model comes equipped with a specific speed range model BSTVM-501 features two modes of operation; touch mode at 2800rpm for quick mix and larger tubes; continuous mode for continuously mixing at lower rpm (1000rpm). In this case, users do not need to worry about adjusting the speed when used in continue mode, avoiding the spin off the sample adapter during operation. This vortex mixer comes with standard rubber cup for the touch stirring and a plastic adapter which can use different foam format. Customers may also order different foam types with different types of vials as mentioned below.

Features : LED display easy reading of time and speed Wide speed range of 0-3000rpm Orbital diameter 6mm Touch mode, timer mode and continuous mode are available Brushless DC motor and sturdy iron/aluminum casting bas Low operation voltage (12V) for full protection Excellent mixing capability can make full 50ml containers mix within 3 second Protect dynamic balance design can eliminated any movement in mixing Various application with different interchangeable attachment Power supply CE , cULus, CCC, SAA and FCC certified

The unit features a powerful, counter-balanced motor drive, continuous or "touch" mix modes • Variable speed (0-3400 rpm) for gentle to vigorous mixing • Cup head for all standard micro tubes and centrifuge tubes available • Touch and continuous mix modes resistance * Attachments will be ordered separately