Water Bath Dealers in Tri Nagar, Delhi

Water Bath-REW-221 APPLICATIONS Double Walled Water Bath generally used for evaporating liquids for boiling thematerial. Single Walled Water Bath is low cost options for heating / boiling ideal tool for Laboratories, Pharmaceutical, Food & Beverage Industries and Institutions. SALIENT FEATURES & CONSTRUCTION Single walled made of heavy gauge stainlesssteel. Provided with concentric rings (Removable) of 75mm hole. Concentric rings can be removed to accommodate containers of varioussizes. Heating by immersion heaters. Temperature range ambient up to 90oC. Operating Voltage: 220 Volts AC (50 Hz)

• Available in both Analog and Digital models: Stainless Steel Gable Cover
• Available Sizes: 2, 5, 10, 20 and 28 liters: Excellent temperature control
• Inside stainless steel tank: Temperature range Ambient +5° to 100°C
• Over temperature protection: Safe for operator and samples

Looking for cost effective heated water bath? Bionics Scientific brings to you a series of Laboratory Unstirred Water Baths, unbeatable for everyday use and safe for your samples as well as for operators. Also called as boiling water bath, these unstirred heated water baths come with digital controllers providing excellent experience of temperature control and ease of use. Along with durable construction, long lasting performance and precise controls, there is a choice of custom design that makes these systems the finest and economical heated water bath models available on the market today.   Our Unstirred Water Baths are classified into two categories i.e. Unstirred Analog Water Bath and Unstirred Digital Water Bath. Perfect for variety of general purpose laboratory applications, these versatile units maintain bath temperatures from ambient +5° to 100°C with + / - 0.25°C uniformity and precision. Temperature setting is adjustable and can be controlled by either PID control or rotary knob depending upon the model. For better durability these equipment are constructed with corrosion resistant stainless steel and are equipped with a stainless steel gable cover with optional thermometer. For providing protection on work place to the equipment, user and samples, these systems are equipped with redundant safety thermostat and alarms. These Unstirred Water Baths are available in 2, 5, 10, 20, and 30 liter capacities. If you need to customize these equipment, we can design them matching to your specific requirements.   Our Unstirred water Bath systems are one of the finest laboratory instruments used widely in research centers, laboratories, educational institutes, medical and industrial applications. Bionics Scientific is a leading Unstirred Water bath manufacturer, supplier and exporter in India and supplies these equipment to all over Asian, African and Middle East countries at factory price. Each unit is supplied after going through factory testing procedure and quality checking.

• Brand Name: Rebico
• Application: Industrial
• Resistivity: Rust Resistant
• Material: Metal
• Durability: Long Life
• Surface Finishing: Polished
• Drive Type: Electric

We are a distinguished Manufacturer and Supplier of Refrigerated Water Bath (RS00B0104). Inner chamber of the Refrigerated Water Bath is made of Stainless steel and the outside is made of mild Steel Painted/ Powder Coated. The gap between the two is filled with glass wool. Heating is done by immersion heater placed in the chamber and cooling by sturdy refrigeration unit duly controlled by Electronic Digital Temperature Controller Cum Indicator from 5oC to 90oC with Sensitivity of ± 2oC. Front panel of the Refrigerated Water Bath is provided with indicator lamp individual switches for heating and cooling purpose.

Magnesium Sulphate / Sodium Sulphate Test Water Bath-VSLIC5030 Product Description Magnesium Sulphate and Sodium Sulphate Tests are used for determining the soundness of aggregates when subjected to weathering action such as freezing and thawing cycles. It should be noted that other equipment like ovens, sieves, balances etc. are also required to perform these tests.Sodium Sulphate can be used instead of Magnesium Sulphate according to the ASTM standard. Vertex Hydrometer 1100- 1200 g/ml is required for the test with Sodium Sulphate. (The temperature of test solution that is in the dipping chamber produced of stainless steel can be automatically adjusted to required temperature with the heating and cooling system.). Homogeneous temperature distribution can be obtained with the water circulation pump. The temperature controller is a microprocessor type. The Magnesium Sulphate / Sodium Sulphate Test Water Bath can be used as a general purpose water bath when the dipping cabinet is removed.

We hold expertise in manufacturing and supplying and exporting a superior quality range of water baths. M.K. Scientific Instruments water baths are heated chambers used for many industrial areas applications environmental applications, academic facilities, clinical laboratories, food technology, government research laboratories and waste water facilities etc. by M.K. Scientific Instruments are known as exceptional Water baths specially designed for testing applications. Double walled Inner Body: Inner chamber made of Stainless steel. Outer Body: outer chamber develop using high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches. Insulation between inner & outer wall with mineral wool/ glass wool thick to avoid any heat loss. Comes with glass mercury thermometer based temperature display provision Temperature Range: Temperature ranges from few degrees above ambient temperature to 97°C ±2°C. Temperature Controller: The Temperature is totally microprocessor based P.I.D., /Thermostat or Digital Temperature Controller cum Indicator controlled for accurate temperature rating. It is Suitable for holding 2, 4, 6, 8 racks Power: Power input to be 220-230 Volts AC, 50/60 Hz fitted with Indian plug. Safety Feature: Thermostat based safety device. Perforated cover of stainless steel based diffuser shelf finish Shelves: Stainless steel perforated/wire road shelves adjustable and sliding. Heater : Tubular U type air heater

Nitrogen evaporators (water bath type) are typically used “to concentrate samples before analysis or to concentrate samples before a solvent exchange.When a scientist needs to concentrate a sample that’s in a volatile liquid—like acetone, acetonitrile, or methanol—a nitrogen evaporator can do the job. As a result, scientists use this technology in sample preparation in environmental, polymer science, quality control, and toxicology labs etc.Our nitrogen evaporators utilize adjustable nitrogen blow down technology allowing full control of nitrogen flow to samples, with no wasted nitrogen gas. We combined this technology with uniform efficient heat applied through water baths. This simultaneously maximizes solvent evaporation in the samples being concentrated and saves the lab money. The 24 position WEIBER nitrogen evaporator is our most adaptable version but we can customize it to 6/12/34/50 positions as per the requirement. Microprocessor based control system. Can accommodate samples with an outside diameter of 10-30 mm. Provides controlled concentration of sample vials through the application of nitrogen gas within a heated water bath. The dual band spring hoist assembly provides a simple and effective means of removing samples from the heated water bath. Circular rotating design permits each sample to be accessible from the front of the instrument for easy insertion and retrieval. The chrome plated needle valves are individually milled from solid brass, enabling precise, uniform adjustments for your nitrogen blow down. Efficient and safe sample reduction with minimal nitrogen waste. Long lasting and user friendly technology Gas flow can be controlled at each sample position via needle valves Nitrogen filter High pressure phthalate free tubing for safety, Teflon tubing for no contamination Needles, 4 inch x 19 gauge with polypropylene hub and stainless steel shaft 220v wiring harness (optional) Z-Purge/intrinsically safe purge case (optional) Acid resistant coating on instrument and needles (optional) Side control box with built-in digital controller, timer, and pressure regulator (optional)

Cooling Water Bath is a double walled and highly advanced system. Its inner Chamber is manufactured using stainless steel and the outer chamber using M.S. duly powder coated steel. Copper Cooling Coils are welded on the outer body of Cooling Water Bath. Its body is mounted on sturdy angle iron frame with caster wheels for easy mobility. The temperature of our Cooling Water Bath varies from 50c to 600c. Our Cooling Water Bath is provided with circulating Pump and digital temperature controller. The size of our Cooling Water Bath is 12̢̢۪۪ x 12̢̢۪۪ x 12̢̢۪۪.

We provide Serological Water Bath that is double walled with inner chamber made up of S.S. Sheet and outside is of M.S. Sheet duly enamel painted. The gap between the walls is filled with special grade glass wool in order to avoid thermal loss. A drain plug is also fitted to the unit. The inner chamber fitted with immersion type heating element is covered with perforated removable diffuser tray. Temperature from ambient to 100°C is controlled by hydraulic capillary type thermostat with an accuracy of ± 0.5 0C. Salient Features : Technically advanced designHigh strengthLong functional lifeTrouble free performanceCompetitive pricing Ideal for : Research InstitutionsLaboratory applications Ranges : Width Height Depth :300 x 250 x 175 mm330 x 300 x 175 mm455 x 300 x 175 mm605 x 300 x 175 mm

• Features: Water Bath has (20±2) 0C accuracy and can be used as a general-purpose water bath that temperature is between 15-60 °C temperature, Supplied complete with the immersion container with the cover

  Double walled inside made of stainless steel outer made of M.S. duly painted with backed enamel paint. Range 5ºC above ambient to 90°C & controlled by thermostat. Complete with mains indicator & perforated tray. Cover is provided at the top. .   Inside chamber size 300 x 250 x 175 mm (2 Racks) 325 x 300 x 175 mm (4 Racks) 450 x 300 x 175 mm (6 Racks) 600 x 300 x 175 mm (8 Racks) Optional AccessoriesDigital Indicator cum controller can be fitted Stirrer can be fitted

Fermentor Vessel, industrial electric ovens, Blood Bank, Freezer Dryer

Rapid Moisture Tester, Gold Melting Furnace, Concrete Mixer

Heat loop Sterilizer, HORIZONTAL AUTOCLAVE MACHINE

Muffle Furnace High Temperature, Laboratory Muffle Furnace 1000 Deg. C.