Water Detector Dealers in Shastri Nagar, Delhi

• Standard target plate: 100mm×100mm
• Transducer frequency: About 112kHz
• Response delay: About 195ms
• Power consumption: P0 ≤900 mW
• Repeat accuracy: ≤0.1% of full-scale value
• Temperature influence: ≤2% from full-scale value
• Sensing distance 160: 2000mm
• Adjustment range 200: 2000mm
• Unusable area 0: 200mm
• Operating voltage UB 10: 30VDC,ripple10%ss
• Output type 1 analogue output 0: 10V
• Ambient temperature -25: 70°C
• Storage temperature -40: 85°C
• Load impedance 0: 500 Ohm
• Connection Connector: M12x1,4-PIN
• Resolution evaluation range: [mm]/4000, but ≥ 0.35 mm

• Brand Name: Pyrotron
• Working Temperature: 20-60 Deg C
• Rated voltage: 24V DC
• Analog current output: 4.0-20.0 mA
• Frequency: 50 Hz

• Type: Float Sensor
• Color: White
• Condition: New
• Country of Origin: India
• Color: White

  Introduction: a float sensor is a device used to detect the level of liquid within a tank. The switch may be used in a pump, an indicator, an alarm, or other devices. The magnetic float sensor is an electromagnetic on/off switch. It helps to sense the level of water present in the overhead tank or sump. These sensors have a permanent magnet in the float. The switch is present in the white stem of the sensor. As the float rises or falls with the level of water in the tank, the switch gets activated by the magnet in the float, thereby the signal which is obtained from the sensors is used along with the water level controllers for controlling the motor pump.

• PE-101V (Lower & Upper): CE Approved
• Switching Capacity------------10 Watt: Switching Current--------------0.5/1.0 Amp
• Switching Voltage--------------200 VDC: Pressure -------------------------3-5 Bars

We are offering Magnetic Float Sensor, Switches etc.Parasnath Electronics is one of the leading manufacturer supplier and exporter of different types of Proximity Switches such as InductivePhoto-ElectricMagneticCapacitiveLDR type, Float Switches, Flow Switches, Magnetic Door contact for security systems, Signal Isolators and SMPS (switching Mode Power Supplies) etc. We also mfg. Control PCB Card and its sensors for the Vehicle Tracking for Petrol & Diesel trucks etc. Product specification:-Magnetic Float Switches Level Sensors 1. TYPE : Vertical (Upper & Lower Level) Horizontal 2. OUTPUT LOGIC : NO NC NO+NC 3. SENSING : 1 SET, 2 SET & Multi set points 4. MATERIAL : Plastic & Stainless Steel (SS 304 & 316 ) 5. APPROVALS : CE

Float Sensor is an electrical ONOFF Switch, which operates automatically when liquid level goes up or down with respect to specified level. The Signal thus available from the Float Sensor can be utilized for control of a Motor Pump or an allied electrical element like Solenoid, Lamps, and Relays etc. Float Sensors contain hermetical sealed Reed Switch in the stem and a permanent Magnet in the Float. As the Float rises or falls with the level of liquid the Reed Switch is activated by Magnet in the Float. Hamilton Float Sensors are available in wide range according to operation material mounting methods to suit variety of individual application. These Float sensors are rugged, accurate and reliable in operation.

oil sensor, CO2 Gas Detector, Flammable Gas Detector

Ultrasonic Level Sensors, Recorders & Datalogger, Thermocouples, Flow Meters

float sensor, water tank alarm

magnetostrictive level sensor, Hand Hold Flammable Gas Detector