Waterproofing Membranes Dealers in Delhi

• Country of Origin: Made in India
• Material: HDPE
• Color: Black
• Packaging Size: 1X20 Mtr

• Thickness: 2mm
• Application: Roofing
• Color: Black
• Size: 1x10 Meter
• Brand Name: CRC

• Material: EPDM
• Thickness: 4 mm
• Color: Black
• Brand Name: Febolex
• Usage/Application: Waterproofing
• Packaging Type: Roll

• Thickness: 2-4 mm
• Color: Black
• Service Type: Membrane Water Proofing Service
• Usage/Application: Waterproofing
• Type Of Construction: Commercial
• Roll Length: 10 M
• Type of Project: Roof
• Coating Type: Brush and gurmala
• Water Proofing Material: Waterproofing liquid chemicals

APP, SBS, Self Adhesive Water Proofing Membrane available in 2-4 mm thickness. USES Ideal for Roof. Pools basements, Sunken area Terrace, Gardens

We are offering waterproofing membranes, thermal insulation membranes. app membranes, sbs, self - adhesive membranes, mineral finish membranes, heat reflective waterproofing acrylic coating, xps thermal insulation, bituminous modified tapes and pvc water stops.

• Type: Waterproof Membrane
• Brand Name: INSUTECH
• Black: Black
• Place of Origin: Egypt

STP Limited, India, waterproofers to the nation since 1935 and Carlisle SynTec Incorporated, USA, with over 40 years experience join hands to bring you the best waterproofing solutions. EPDM Roofing Systems 45 years ago, Carlisle pioneered single-ply roofing. Today, more than 12 billion square feet of membrane have been sold. No other manufacturer has a comparable track record. EPDM’s success is due to its many exceptional characteristics, including material longevity, weatherability and elasticity. These non-reinforced membranes are lightweight, easy to maneuver on the roof and offer optimal reroofing as well as new roofing solutions. Sure-Seal (black) EPDM (Ethylene Propylene Diene Monomer) nonreinforced membranes are available in standard 45-, 60- and 90-mil thicknesses. Membrane widths up to 50' and lengths to 200' which result in less rooftop seaming for large projects. Custom sizes may be requested. Fully-Adhered Systems utilizing EPDM require mechanical or adhesive attachment of the insulation and bonding of the membrane to the insulation with the recommended adhesive. Ballasted designs incorporate a loose-laid insulation and membrane and the use of ballast or pavers as securement. TPO MEMBRANE SYSTEMS Sure-Weld Thermoplastic Polyolefin (TPO) roof membranes are not adversely affected by most common materials and chemicals encountered in a roof environment.  Since the field seam is heat welded, it is as resistant to chemicals as the base sheet. The best course of action to take if unusual substances will contact the membrane, is to evaluate their effect on the membrane in the laboratory.  Carlisle SynTec's Laboratory is equipped to perform this testing, interpret the results, and provide a recommendation.  APP MEMBRANES STP has the largest range of Atactic Polypropylene modified bitumen membranes which include: Super Thermolay : It has a multilayered design consisting of a 160 gsm polyester core coated with APP (Atactic Polypropylene) modified bitumen and finally finished with thermo fusible polyethylene film.Aqua Shield : It has a multilayered design consisting of a 160 gsm fiberglass core coated with APP (Atactic Polypropylene) modified bitumen and finally finished with thermo fusible polyethylene film.Super Thermolay MT and Aqua Shield MT : These have mineral/slated finished as a top surface.Self Adhesive Membranes : It consists of self adhesive SBS (Styrene Butadiene Styrene) rubber/bitumen compound covered on the top side with high density cross laminated polyethylene film and on the underside with an easy-to-peel silicon film.

Bengal Aquaflex is heavy duty APP (Atactic Polypropylene) modified polymeric waterproofing membrane manufactured to high standards. It is a five- layered membrane with a centre core of 100 micron. HMHDPE. The centre core reinforcement protects against water and moisture and makes it totally impermeable. The centre core is coated on both sides with high quality polymeric bitumen with properties of high softening point, high heat resistance and cold resistivity. This makes it ideal for even heavy duty 'Waterproofing treatments'. The polymeric bitumen on both sides of the centre core is protected on both sides with thermofusible HMHDPE film. The finished membrane has an elongation of over 300 percent to absorb all structural movements. Main Features Good dimensional stability   Enhanced resistance to chemicals Elongation exceeding 300 percent to absorb all structural movements   High tensile strength and cold flexibility BENGAL AQUAFLEX WITH Aluminium Top (ALT) Bengal Aquaflex is also available with 75 micron thick Aluminium foil on top. The Aluminium Top provides protection from UV rays, delays ageing and prevents disintegration of bitumen. USES Aquaflex is ideal for rooftops, basements and terrace gardens. It meets CPWD Specifications. Method of Application Clean the surface to make it smooth. Apply a coat of Bengal Primer @ 0.3 liters per sqm on the clean surface. This should be followed by a coat of hot applied Bengal Bitumen 85/25 @ 1.2 kg per sqm Lay and press Bengal Aquaflex on the hot bitumen. A minimum overlap of 100 mm is recommended between the two rolls of membrane to be sealed with blown bitumen. Bengal Aquaflex is to be topped with screed or tiles as the case may be.   Outstanding Features High softening point and high penetration. High elongation. Flexibility at very low temperature.

A waterproofing membrane is a thin layer of water-tight material that is laid over a surface. This layer is continuous and does not allow water to pass through it. For example, on a flat terrace, a waterproofing membrane could be laid above the structural slab and below the finish tiles. This will ensure that water does not seep into the structural slab. The tiles and membrane must be laid over a filler material that is sloped to ensure that water flows into sumps and drains. Any water that remains as puddles over the tiles is likely to seep into the slab over time, so puddles are to be avoided at all costs. We at Mono Industries are manufacture these membranes which are strong, flexible, tear-resistant & elastic sothat it can stretch to cover cracks and also move with the building. Since these membranes are to be exposed tothe sun, we manufacture them so that they can withstand the heat & water for a long time. These membraneare flexible enough to take any shape they are laid over and are capable of turning up and over walls & otherconstruction features.

SuperThermLay APP PL/MT Waterproofing Membrane that we offer is procured from the trusted sources of the market. During the procurement process, special attention is paid on the quality of Waterproofing Membrane. We are one of the leading Suppliers of Waterproofing Membrane from Delhi, India. We have developed a vast distribution network that enables us to deliver retail as well as bulk orders for the membrane on time.   Features : APP Modified memberane with spun bonded polyster reinforcement Total imppermeability Excellent resistant to ageing & weathering Outstanding bond -ability & seam integrity Stability at high temprature Resistance to impact & puncture Excellent cold flexibility Easy application & economical withstand thermal shock resistant to chemical attack Application : Waterproofing for roof top & terrace garden Reservoir Basements Foundation works Tunnel & car parking

• Type: Other Waterproofing Materials
• Brand Name: GRACECHEM
• Place of Origin: Delhi, India

• Color: Brown
• Shelf Life: 18 months in original unopened condition.

ShaliPlast® Characteristics RCI is bipolar roving corrosion inhibiting concrete admixture for use in reinforced concrete and mortar. It meets the requirements for Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete. It confirms to ASTM C1582 C1582M – 11.

APP Waterproofing Membrane, roof waterproofing services, waterproof sealant

APP Waterproofing Membrane, Basement Waterproofing Services

It is manufactured as per IS1322:1993, Type 3 Grade 1 and Type 3 Grade 2 respectively. BH DPC is produced by saturating a centre core of hessian with straight grade bitumen and coated with specially formulated bituminous compound on both sides. Thereafter, Mica sand is spreaded over bituminous surface to prevent the sticking between two layers of felt during rolling and storage.

modified asphalt waterproofing membrane, Pain, water proof material

Waterproofing Membrane, adhesion primer, aluminium pebble, app membranes