Welding Hose Dealers in Delhi

• Reinforcement: Synthetic Yarn With High Tensile Strength.
• Lining: Natural & Synthetic rubber blend
• Cover: Natural & Synthetic rubber blend with good ageing & abrasion resistance in both red & blue colours
• Temp.Range: -40°C to + 80°C

Application   Suitable for gas welding / cutting in fabrication work.

Welding hose is used to connect regulators with torches. It must be light, strong, nonporous and flexible enough to allow for easy movements. It must be strong enough to bear pressure of up to 100 psig and must be made of the rubber specially treated to remove sulphur that could prompt spontaneous combustion.   Single and double line welding hose lengths are available in the markets. The appropriate size of the hose depends on the type of work to be done. Light work typically requires hose with 3/16’’ or ¼’’ inside diameter and one or two piles of fabric. Heavy duty welding and cutting applications may require 5/16’’ inside diameter and three to five piles of fabric. Single hose is available in the above standard sizes and also in ½’’, 3/4'’ and 1’’ sizes. Use with large cutting machines and other heavy duty applications may require larger sizes. Length:The length of the hose used affects the delivery pressure of the torch. A longer hose results in a lower pressure, therefore, longer hoses should have larger inside diameter to allow for adequate gas flow into the torch. Color:Hoses used for oxygen and fuel gas have different colors but have same construction. Color coding is a precautionary measure to minimize the chances of confusion and dangerous errors. Red hose is used for the fuel gas Green hose is used for Oxygen. The hose is supplied as per IS: 447-1988 specificationsApplications: Recommended for use in gas cutting and welding work in workshops, construction sites, manufacturing units and ship yards. Construction Tube:It is manufactured with natural and synthetic rubber and comes with uniform thickness.Reinforcement:High tensile synthetic yarnCover:Blend of natural and synthetic rubberFinish – Four types of finishes are offered – Smooth, Plain, Fluted and Wrap Finish. Color:Red for fuel gases Blue for Oxygen and non-fuel gases

• Country of Origin: India
• Material: Rubber
• Color: Red
• Finishing: Coated
• Usage: Industrial Use
• Specialities: Perfect Finish
• Packaging Type: Packet
• Standard: IS:447/88

• Size: 1inch, 2inch, 3inch
• Thickness: 0.5-5mm, 10-15mm, 10-20mm, 15-20mm, 20-25mm
• Length: 100-150mtr, 150-200mtr, 200-250mtr
• Condition: New
• Dimension: 100-200mm, 200-300mm, 300-400mm, 400-500mm
• Feature: Corrosion Proof, Durable, Excellent Quality, Optimum Performance

Our PVC Nylon Braided Welding Hose is ideal for Oxy-Acetylene welding purposes and cutting equipment, the PVC Nylon Braided Welding Hose offered by us is better than the conventional rubber hose available in the markets. Long lasting performance and superior quality are some of the features that our PVC Nylon Braided Welding Hose possesses. Our Nylon Braided Welding Hoses are manufactured with stringent quality controls. Used At Industrial shopsShip buildingGarages Available Sizes 8mm to 10mm Colors Available Blue and RedOther Sparkling Colors & Opaques

We are involved in offering excellent quality Welding Hose Pipe to our most valued clients. Our offered Welding Hose Pipe is widely appreciated by our clients which are situated all round the nation. We offer Welding Hose Pipe at most affordable prices.

• Color: Orange
• Material: Rubber
• Is It Flexible: Flexible
• Unit Length: 12-50 meter
• Pattern: Plain

We bring forth quality welding hose pipe, welding hoses, which are manufactured in compliance with set industrial standards. These welding hoses are known for their high performance, tensile strength and durability among the clients. Moreover, we offer welding hoses in varied dimensions and sizes to meet the clients requirements. Standard : is : 447 - l 988 applications : recommended for use with welding and gas cutting in a workshop, shipyards, construction sites and manufacturing industries, etc. Construction : tube : uniform in thickness mode from o blend of nitrile rubber compound.reinforcement : high tensile synthetic yarncover : natural modified rubberfinish : wrap finishcolour : red for fuel gasesblue for oxygen : si n0n—fuel gasestemp. : -40°‘c to + 70°c

Features Flexible and Non-Corrosive. Light weight with high performance. Durable with Extra Strength. Leak-proof Crack and chemical resistance Customized Sized 6MM,8MM,10MM is Available. Application Gas Welding Small Compressor Agriculture Potable water supply Any type of gas flow

As a trusted name, we always make sure that our products are properly packed and remain free from damage during transit. For this, we have hired an adroit team of experts having immense experience in packaging. We are a quality conscious firm and consider all the quality measures right from the product development to the final dispatch.

Rubber Welding Hose is recommended for use with welding and gas cutting in a workshop, shipyards, construction sites and manufacturing industries etc. Uniform in thickness, the Rubber Welding Hose is manufactured with natural and synthetic Rubber. We are engaged in manufacturing, exporting and supplying Rubber Welding Hose at competitive prices. To order quality-tested Rubber Welding Hose in bulk, feel free to contact us. Specifications : Reinforcement : high tensile synthetic Yarn. Rcove : Blue for – Oxygen & non fuel gases. Temp : 40o F to + 160o F

• Material: HDPE
• Packaging Type: Roll
• Color: Blue
• Size/Diameter: 5 - 10 mm
• Usage/Application: Industrial
• Single Hose Length: 50 meter

• Type: Welding Hose Pipes
• Color: Black, Blue, Green, Orange, Red, Yellow
• Condition: New
• Dimension: 100-200mm, 200-300mm, 300-400mm, 400-500mm, 500-600mm, 600-700mm
• Pressure: High, Low, Medium
• Feature: Durable, Easy To Use, Optimum Performance, Perfect Finish, Scratch Proof

• Country of Origin: India

Welding hose is made strictly as per IS : 447-1988. All operations are inspected frequently during every stage of manufacturing. Finished product is carefully tested to make sure that meet the specification for bursting pressure, tensile strength, elongation, adhesion strength test etc. It is hazardous to interchange acetylene hose or use other types of welding hose for LPG. LPG being Liquefied Petroleum Gas has corrosive action which dissolves interior of lining & this mixture would retard flame temperature and produce inferior cut. Also in extreme cases it could lead to explosion & serious fire. A special LPG hose with synthetic lining is recommended & can be supplied on request.

We have a strong foothold as Manufacturer and Supplier of Welding Rubber Hose Pipe, located in Delhi, India. We have a team of adroit personnel who fabricate it making use of superior quality rubber and ultra-modern machines so as to enhance their quality and longevity. We make Welding Rubber Hose Pipe available in ample of specifications in order to meet variegated demands of the buyers. Our Rubber Hose Pipe is competitively priced. 

Gravity offers premium welding & gas cutting hoses featuring a highly flexible & flame resistant tube & cover. These hoses are compatible with common used fuel gases, including acetylene, propane. The synthetic  textile braids provides additional resistance & thick cover resist impact from heat, sharp edges & rough treatment.