Welding Machinery Dealers in Kirti Nagar, Delhi

This Ultrasonic Hand-Held Welding System Is Being Successfully Used In Cooler Industry – Mainly For Fixing Holding Brackets In Corner Of Lower Body Of Cooler – These Brackets Later Used To Hold The Upper Part Of The Cooler.Screws Used To Get Jammed Due To Rusting Thus Makes It Very Difficult For The Technician To Open It For Any After Sales Service.This New Ultrasonic Welding Eradicate All The Mess And Makes The Opening Very Ease Even After Many Years Of Operation. This System Is Also Being Used For Fixing Fancy Articles On The Front Panel Of The Cooler.It Helps In Minimizing The Cost And The User Gets A Fast Return Of Investment.20 KHz Ultrasonic System Is Practically Being Used In the Cooler Industry.

Our company is counted amongst the renowned Manufacturers, Exporters & Suppliers of PVC Welding Machine (E-MS). The PVC Welding Machine (E-MS) is a general purpose small run model that is extremely used for baby shoes, medical IV tubes, etc. The PVC Welding Machine (E-MS) is specially designed for shrink film sealing. Suitable For : Baby shoesMedical IV tubesShrink film sealing

We are a well-known organization that is engaged in trading and supplying high quality Rectifier Welding Machine. All the offered machines are manufactured using quality components and spare parts in strict compliance with industry standards at our vendors’ end.

• Technical Data: Power Compact 255
• Power Source:  
• Mains supply, Ph x V, Hz: 3 x 415, 50
• Open circuit voltage, V DC: 30 - 250
• Welding current range, A: 30 - 250
• Max. Continuous Welding Current:  
• At 35% duty cycle, A: 250
• At 60% duty cycle, A: 190
• At 100% duty cycle, A: 140
• Voltage control steps (single knob): 10
• No. of inductance outlets: 2
• Spot welding time, sec: 0.2 - 2
• Interval time, sec: 0.2 - 2
• Type of cooling: Forced Air
• Dimensions, l x w x h, mm: 840 x 375 x 736
• Weight, Kg: 90
• Wire Feeder: Drive system
• DC motor: Speed control
• Stepless: Feed mechanism
• Double roll quick changeover type: Wire feed speed, m/min
• 1.5 - 22: Wire diameter, mm
• 0.8 – 1.2: Wire type
• MS: Ordering Information
• Power Compact 255 Package: 4650686700
• MIG Torch, PSF 250 3m: 4650692900
• MIG Torch, PSF 250 4.5m: 4650692901
• Regulator Dura CO2: 4650193002
• Regulator ICO 32B: 4330193100
• CO2 Heater 220V: A651689045

Hi - we are india's largest distributor of welding & soldering (online+offline). We sell welding & soldering for wim, ador welding, blue point, soldron, toni etc.

Champion Gasket Sheet

We have well-maintained and capacious storage unit that includes all required facilities vital for a safe stacking of the products. We are working with experts and professionals and they supervise the range sternly ensuring zero damage to the stored items. We keep a stern quality check on the various stages of designing and manufacturing or be it sourcing of raw material as well. We make certain that the materials used are of high quality and standard.

• Voltage: 380V
• Driven Type: Electric
• Automation Grade: Manual
• Color: Black
• Country of Origin: India
• Brand Name: Omwc
• Color: Blaxk and white
• Material: Allumiinium amd copper
• Weight: 100-1000kg
• Condition: New
• Warranty: 1year
• Certification: Iso
• Power: 400 amp
• Machine Type: Diode based
• After-Sales Service Provided: Sefrvice Executive with conveyanc, fooding and nifht stay charges as applicanble
• Wire Diameter: 0.8 and 1.2
• Brand: Omwc

We offers all kinds of arc welding machine.

• Type: Automatic
• Condition: New
• Use: For Welding
• Packaging: As per client requirement

Details : Fit the welding Machine with the dies of required pipe and fitting diameter to be processed a. connect with plug to the 230V Power supply socket. Wait until thermostat light on the machine goes off, indicating that welding machine has reached the working temperature (260° C) Cut the pipe at right angles to axis. In Order to avoid the errors in defining the distances and direalon of the fittings, one may use pencil for markings. Push the end of the pipe and simultaneously the fitting without turning them up to the mark. welding depth into tool. It is important to observe the heating times of assembly Parts. After stipulated heating time, quickly remove pipe 7 fitting from the welding dies. Join them immediately and without turninng, until the marked welding depth of pipe is covered by the PP-R fitting. After heating the joining parts don't push them vigorously. At the stage of joining, it Is possible to effect the rotatan of maximum 10 to 15 in order to perform coaxial correction.

• Thickness: 15-30 mm
• Material: Carbon Steel
• Application: Construction
• Technique: Hot Rolled
• Shape: Rectangular
• Feature: Reliable, Durable

• Beam Length: 1064nm
• Cooling: Water Cooling
• System Installation Dimensions: 1400x650x1320mm
• Laser Power: 200W
• Minimum Pool: 0.2mm
• Welding Depth: Less Than 1mm

• Material: Aluminum
• Features: Strong construction, Fine finish, Easy and safe to use
• Size(mm): 4.0mm

• Weight: 3400 Kg (Approx)
• Brand: Kamsonic
• Controller: Mitsubishi FX 2N PLC
• Life Table Speed: Max 250mm/Sec Min. 188mm/Sec
• Noise Level: Less than 85 dBA (the average)
• Dimension: L2438xW1930xH1092 mm
• Drive Plate Fixture Weight Capacity: BVW -10 18
• Drive Platen: 958 long x 375 wide (mm)
• Central Hole on Vibrator: 958 long x 375 wide (mm)
• Central Hole on Working Table: 668 long x 250 wide x 175 deep (mm)
• Variable Stroke: 508 max (mm)
• Single Cycle Time: 5 Sec at 508mm Max Stroke,200(w/o weld)
• Power Requirements: 480V AC, 25A,15KVA, 3 Phase,50/60Hz
• Maximum Clamp Force: 22.2KN (5000LB)
• Output Frequency: 200Hz
• Front Window: 1245 wide x 597 high (mm)
• Lift Table: 1219 long x 558 wide (mm)
• Timer: 0.01 sec to 9.99 sec (3T)

Electrodes Control System The upper electrode actuated by heavy duty 2-way cushioned pneumatic cylinders controlled be an electrically operated 4-way solenoid valve. Compressed air at 1.5 kgcm2 -5.6 kg.cm (20 to 80 psl) acting on the pneumatic cylinder provides electrode force. Machine provided with air filter, air lubricator, air pressure regulating valve, air pressure gauge. Adjustment Of Electrodes Force By air pressure regulating valve provide on the machine. Adjustment Of Electrodes Stroke By vertical adjustment of lower armplaten

Laser Equipment, Laser Engraving Machine, Double Head Laser Engraving Machine

• Brand Name: Jodhka
• Frequency: 50/60 Hz
• Model Number: ARC 300
• Rated Input Current: 18.5 A
• Input Voltage: AC 380V
• Rated Output Current: 20-300 A
• Net Weight: 18 kg
• Input Power Capacity: 12.6 W

• Features: Non-flammable, Non-corrosive.
• Model/Grade: Grade 321
• Form: Spray
• Usage/Application: Industrial
• Packaging Type: Can
• Quantity Per Pack: 24
• Packaging Size: 360g/500ml

Finest quality of CRNGO steel and semi processed steel is sourced from global firms of repute. To ensure quality of the purchased wide coils, Pearl sample tests every coil for its magnetic & mechanical properties or uses test results from certified suppliers. Coils are tested for watt loss with the help of Epstein Square Tester. The lab engineers at Pearl analyze each and every input and maintain the records for traceability of every coil.

We are pioneers in making available impeccable MIG Welding Machine that is a Constant voltage Rectifier Power Source for Dip and Spray Transfer. Our MIG Welding Machine has separate wire feeder unit for greater area of operation & mobility.  The MIG Welding Machine that we offer is used where continuous welding is required such as Light & heavy fabrication Workshops, auto industries, wagon building Sugar mills and ship yard.  Highlights Improved Welding quality Increased Production Less fatigue to the welder

• Frequency: 36 kHz
• Input Voltage: 220 V
• Oscillation System: Auto-stimulating
• Output Time: 0.01-99 Sec
• Pressure: Pressure bound 1-7bar
• Welding Pressure: 2-5 kgs/cm2
• Productive: 2-3 seconds/pc
• Compressor: 2 HP
• Net Weight: 105 Kg

Spot welding machine suitable for use in Car body repair. The multi function control panel allows automatic regulation of Spot welding parameters according to the chosen tool and sheet thickness. Two phase, micro processor controlled. Large LCD screen to set time & power levels. Pneumatically operated spot welding gun.

Spot attachment is one in every of the oldest attachment processes. it's employed in a good vary of industries however notably for the assembly of sheet steel vehicle bodies. this is often a kind of resistance attachment wherever the spot welds square measure created at regular intervals on overlapping sheets of metal. Spot attachment is primarily used for connexion components that square measure unremarkably up to three millimetre in thickness. Thickness of the components to be welded ought to be equal or the quantitative relation of thickness ought to be but 3:1. The strength of the joint depends on the amount and size of the welds. Spot-weld diameters vary from three millimetre to twelve.5 mm.

• Thickness: 1.6, 2.4mm
• Brand Name: Caston
• Packaging Type: Tube Packs
• Wire Material: Tool Steel
• Grade: H13, P20
• Type: Carbon Steel
• Diameter: 1.6, 2.4mm
• Quantity Per Roll: 5 kg

We are involved in catering to the welding industry. Following are the products under this category:Electrode HolderEarth/Ground ClampsMagnetic Ground ClampsRotary Ground Clamps C-Clamps, F-Clamps & Welding ClampsTank WrenchesCable Connectors Cable Lugs SpicersChipping HammersBrass Hose FittingsWelding Cable & Cable KitsMIG CartsElectrode Ovens (Quivers)Miscellaneous Welding ProductsSafety Products and ApparelWelding Helmets Welding Hand ShieldAuto Darkening Welding HelmetsCylinder HolderCylinder Trolley (Carts)

• Size: 4x6ft, 7x6ft
• Type: Welding Blanket
• Material: Fiber
• Application: Industrial
• Weight: 1.5Kg, 1Kg
• Color: Black, Brown, Light Brown, Red
• Technics: Machinemade
• Pattern: Plain
• Feature: Anti Bacterial, Anti-Wrinkle, Comfortable, Dry Cleaning, Easily Washable, Fire Resistance, Impeccable Finish

1 Soldering Iron: 25 watt, 1 Soldering Lead: 3 meter. 1 Soldering Paste (Flux): 1 Box (necessary for soldering with ease). 1 de-soldering wik. 1 high quality GEC soldering stand. Orignal and Brand new product Perfect for hobbies and craft. Durable elements designed for long life Slide on replaceable tips In the Box :- Electric Soldering Iron Stand Tool Wire Stripper Kit 25 Watt Welding Stick

• Brand Name: VIRDI
• Output Current: 200-300 A, 300-400 A, 400-500 A, 600A

All Workshop,Tool Room machinery is Lathe,Shaper,Radial Drill machine,Hobbing,Milling,slotted,planer,gear shaper,horizontal boring,drill,

Welding SPM

HDPE Electro Fusion Machine