Wire Accessories Dealers in Ajmeri Gate, Delhi

We are offering parallel threaded cable coupler, while lap splicing depends largely on the bond between concrete and steel to transfer load, barcon coupler with its unique parallel – thread, assures positive alignment locking connection thus providing load path continuity and structural integrity. Barcon coupler behaves as continuous length reinforcement bar by promoting full strength in tension, compression and stress reversal situations.

• Packaging: Packet
• Usage/Application: Used to connect welding cables with welding machine
• Material: Rubber, Brass and Stainless Steel
• Product Type: Single Sided
• Connector Type: Male and Female

• Diameter: 0.8mm - 65 mm

High strength steel wire ropes are available as follows:High Carbon, Stainless Steel, Copper, Mild Steel, Nylon, L.D., P.V.C. Coated ropes. Steel ropes can be supplied as per IS, BS, DIN, GOST, JIN & API specifications. Test certificate can be provided on request.

• Color: Black, Natural/White
• Material: Nylon, Plastic
• Customisation: No

• Material: Brass
• Size: 16-23 mm
• Weight: 1.5 Kg
• Brand: Wellworth
• Usage/Application: Rope Grippers Load
• Socket: 2 Pin Socket

After Preparation of cable, the Cable outer conductor/ Jointing Sleeve is tighten and blocked on 360 degree between the cone of the connector body and the flexible rear clamp, resulting in high grade mechanical retention and a perfect electrical continuity and complete shielding. All inner contacts are captivated, thus avoiding any risk of damage during coupling of male to female connectors.   We recommend three Grounding Kits per feeder run. One kit is required at the top, one at the bottom of the run, (plus one at 50 meters interval wherever applicable) and one at entrance to the equipment shelter.   Grounding Kit that have been specially tailored to each cable size can be installed very easily and rapidly, once the jacket is stripped at the required dimensions, one kit can be installed in less than three minutes. Kits are provided all hardware necessary to connect the ground wire to the tower ground bar.

• Feature: Easy To Use, Precision Engineered,Hard Nail .
• Clip Size: 4MM
• Color: WHITE
• Payment Terms: T/T (Bank Transfer)/D/P
• Clip Material: PVC
• Packaging Size: 100 pieces/packet

• Type: Flexible
• Material: Polyolefin
• Application: Electrical

Seewel Cables is telephone wiring manufacturer including, telephone wire, information wires, telecom cabling & telecommunication cables from India. Annealed baretinned high conductivity copper. PVCPECellular PE insulated. Insulated cores twisted to form a pair. Pairs laidup in sub-unitsunits in concentric layers. Taped. Overall PVC sheathed. Individual and or overall shielding with Aluminium-Mylar tapecopper tapelappingbraiding provided depending upon the requirement. Armouring provided with an extruded inner PVCPE sheath and overall sheath of PVCPE wherever required.

• Length: 6
• Width: 2.4
• Brand Name: ESS
• Tensile Strength: All
• Packaging Size: Pkt
• Size: 150mm

We are actively committed towards offering Marker Cable Ties combining conventional techniques of manufacturing with the new age technological improvements. For its clear-cut design and durability, our offered range is broadly appreciated by our prestigious clients. The offered cable ties are specifically manufactured for domestic and industrial applications.

• Country of Origin: India
• Type: Return Spring
• Material: Brass, Carbon Steel, Mild Steel, Steel
• Thickness: 0-5-10mm, 10-15mm, 15-20mm
• Certification: ISI Certified
• Application: Machinery Use, Vehicle
• Grade: AISI, ASTM, BS, DIN, GB, JIS
• Color: Black, Golden, Grey
• Feature: Corrosion Proof, Durable, Easy To Fit, Finely Finished, High Strength, Optimum Quality
• Finishing: Non Polished, Polished
• Wire Diameter: 20-40mm, 40-60mm, 60-80mm, 80-100mm

• Material: Silicone Rubber
• Application: Electrical Industry
• Feature: Easy To Install, Electrical Porcelain, Four Times Stronger
• Protection Level: High Level
• Frequency: 50hz
• Tensile Strength: 1-5mpa

oil seals, Ptfe Oil Seal

• Conductor Size: As per Requirement
• Mechanical Load: As per Requirement

• Country of Origin: Made in India
• Material: Nylon
• Application: Industrial
• Brand Name: rudra
• Size: 60mm

A 33 kV cable jointing kit is a specialized set of components used for joining or terminating medium voltage (MV) power cables rated at 33 kilovolts (kV). These kits are essential in electrical distribution networks where medium voltage cables are used to transmit and distribute electricity over longer distances or within substations.Components of a 33 kV Cable Jointing Kit Cable Preparation Materials: Semi-conductive Tape: Used for cable insulation shielding. Scotch Tape or PVC Tape: Used for wrapping and insulation. Cleaning and Degreasing Materials: Clean cable surfaces before installation. Joint Components: Heat Shrink Tubes: Provide insulation and environmental sealing. Resin or Gel Filling: Used for moisture protection and mechanical strength. Connector Kits: Including connectors, lugs, or terminals for cable ends. Armor Clamps: Provide mechanical protection for armored cables. Installation Accessories: Cable Ties and Fixings: Secure components during installation. Gloves and Safety Equipment: Personal protective equipment for installers. Installation Instructions and Documentation: Guidelines for proper installation. Purpose of 33 kV Cable Jointing Kit Electrical Continuity: Ensures a continuous electrical path between cables or cable ends. Mechanical Strength: Provides robust mechanical support to the joint, protecting against physical stresses and vibrations. Insulation and Sealing: Prevents moisture ingress, which can lead to cable deterioration and electrical faults. Safety: Ensures that joints meet safety standards and regulations to prevent hazards like short circuits or electrical shocks. Installation Process Cable Preparation: Stripping: Remove cable insulation to expose conductor cores. Cleaning: Use cleaners and degreasers to remove dirt, grease, or contaminants from the cable surface. Semi-Conductive Layer: Apply semi-conductive tape to shield the cable insulation. Joint Assembly: Connector Assembly: Attach connectors or lugs to the cable ends, ensuring proper sizing and compatibility. Positioning Components: Arrange heat shrink tubes, resin packs, and other components as per manufacturer instructions. Sealing and Insulating: Heat Shrink Application: Apply heat to shrink tubes, providing insulation and sealing against moisture. Resin or Gel Filling: Pour resin or gel into the joint to fill voids and provide additional insulation and mechanical support. Armor Clamping (if applicable): Secure armor clamps around armored cables to protect against mechanical damage. Testing and Commissioning: Continuity Testing: Verify electrical continuity across the joint using a continuity tester. Insulation Resistance Testing: Measure insulation resistance to ensure integrity using appropriate testing equipment. Visual Inspection: Conduct a thorough visual inspection for any signs of damage or improper installation.

We are the most sought after Supplier of Cable ties of all sizes at competitive rates. Cable Tie offered by us are sourced from manufacturers who fabricate them using high-quality basic materials and advanced technologies. Our Cable Ties are dimensionally accurate, durable and consistent in performance. We have an excellent logistics system to ensure timely delivery of our consignments. We take retail as well as bulk orders.

We are offering cable nail clip. Cable nail clip 3mm to 40 mm,virgin plastic with hardened carbon steel nail.

• Type: Wire Clip
• Material: Aluminum, Metal, Stainless Steel
• Color: Grey, Metalic
• Application: Intustrial Use
• Finishing: Non Polished, Polished
• Feature: Durable, Fine Finished, Hard Structure, Light Weight, Non Breakable
• Type: C Shape
• Material: Plastic
• Color: White
• Brand Name: NA
• Supply Ability: 1000 Bag/Bags per Week
• Model Number: NA

heat shrink indoor and outdoor termination [11kv/22kv/33 kv]heat shrink straight through jointing kits[11kv/22kv/33kv]BRAND AVAILABLE – 3M, RAYCHEM RPG, DENSON

• Material: Plastic
• Usage/Application: Automotive, Computer, PCB
• Connector Type: Male/Plug
• Number of Pins: 10 to 64
• Current Amp: 1.2A max per contact
• Mouldings: High Temperature Plastic UL94V-0

• Feature: Excellent functionality ,Compact design ,Easy to use
• Material: Mild Steel
• Usage/Application: Electrical Industry
• Packaging Type: Box
• Automation Grade: Manual
• Flame Retardant: Yes

• Material: NYLON
• Color: Natural/White
• Size: 19MM X 19MM
• Packaging Size: 100 Piece
• Length: 19MM
• Width: 19MM

• Feature: Reliable, Less maintenance

• Application: Jointing Kit
• Type: Indoor
• Cable Joint: Yes
• Voltage Type: High Voltage
• Conductor Type: Indoor 3M 33 Kv Cable Joitning Kit
• Brand: 3M

Use: Moving work places (Construction site, Industrial site, Laboratory)Features: Automatic rewind, Solid frame, Light weightInstallation: Portable   Model Cable   Maximum Capacity Weight (kg) Remark Cable Specifications L(M) Max (VXA) ALE-220B VCTF-1.5 SQX3C, Outlet 20 220VX10A 17 For Indoor ALE-230B VCTF-1.5 SQX3C, Outlet 30 220VX10A 18 For Indoor ALE-320B VCTF-2.5 SQX3C, Outlet 20 220VX15A 20 For Indoor ALE-330B VCTF-2.5 SQX3C, Outlet 30 220VX15A 22 For Indoor