Yash International Okhla, Delhi

These high conductances, stainless steel SS 304 fabricated valves are designed for reliability and for use as in-line chamber isolation valves and load lock applications. These Gate valves are fitted with Neoprene "O" rings as standard and optionally viton "O" rings are offered. These Gate valves undergo stringent leak detection tests on a Helium Mass Spectrometer for leak tightness.

This versatile Fixed Ultrasonic Flow Meter is the latest innovation employing cutting-edge technology in ultrasonic transit-time measurement, digital signal processing and surface mounting electronics. It provides abundant capabilities for accurate liquid flow measurement from outside of a pipe. The proprietary signal quality tracking and self-adapting techniques allow the system to optimally adapt to different pipe materials automatically.The transducer installation is also simple and no special skills or tools are required. Due to the non intrusive nature of the clamp-on technology, there is no pressure drop, no moving parts, no leaks, no risk of contamination, no risk of corrosion, no pressure dependency. Whereas Insertion sensors, if opted for, can be fitted on line by Hot-Tapping. It makes it an Ideal choice for industrial automation, processing control, water source management, flow meter networking, Hygienic liquid Flow metering and OEM applications.

U-Tube Manometers are versatile, economical instruments for the measurement of pressure, vacuums or differential pressures. Pressure measurements are accomplished by balancing a vertical head of indicating fluid with the pressure to be measured. As there are no cams, gears or levers to operate in the manometer, the readings obtained are always accurate.The U Tube Manometer, have “U” shaped tube, half filled with liquid (Water Mercury SP Gr. 0.81). When both the tubes are open, the liquid is at the same height in each leg (Tube Limbs). When positive pressure is applied to one leg which is the sum of the reading above and below zero, tells you the pressure. When vacuum is applied to one leg, the liquid rises in that leg and falls in the other. The difference in the height indicates the amount of vacuum.

Feature : Zero adjustment scale,Available in Acrylic Body

Type : Textile Foils

Material : Pvc, Silver

Application : Textile Use

Color : Metalic, Silver

Feature : Durable, Eco Friendly, Fine Finished, Freshness, Good Quality, Heat Resistant, Maintain Temprature

Width : 10-15Inch, 15-20Inch, 5-10Inch, 0-5Inch

Texture : Smooth, Soft

Packaging Type : Paper Box, Roll

Involute spline hobs have a stud tooth depth for cutting all types of standard and non-standard involute splines whereas straight spline hobs are used for cutting parallel splines & are manufactured in single or multi start design with pressure angles 20°, 30°, 37.5° & 45°.

Hss slitting saws are manufactured for ferrous metal and for non-ferrous metal industry. These blades are specifically suited for use in manual, semi-automatic and fully-automatic sawing operations. All blades are hardened to 6364 hrc, triple tempered and pressed quenched to give flattest saw possible. Designed for general slotting or cut-off operations

We follow a stringent quality procedure to ensure that only a qualitative range of products should be delivered at buyer's end. Based in Delhi(India), our organization is involved for years in supplying the finest grade of slitting saws in the industry.

We are offering rack cutters. Rack type cutters are produced for the sunderland and maag & gear planning machines for both spur and helical gears from 1 module – 30 module ranging from single tooth to multi tooth depending upon client requirement. Available in hss m2, asp 2030 & asp 2023 material

Ball valves are of soft seated, Floating Ball valve gives Zero Leakage, Tight Shut-off, and Easy smooth operation at temperature ranging from -200 to +1200 C. Metal to Metal seating offered for higher temperature services on request.

Pinch valves resist clogging and are best suited for tough applications which clog in the pipeline. Pinch valves being glandless and seatless with smooth interior construction lessen the chances of clogging considerably. Pinch valves can be operated by hand wheels, pneumatic actuators, hydraulic actuators or electrical actuators.Split casting ensures quick maintenance of the valve.

Material : Hologram Paper

Thickness : 30 Microns

Oval meters are instruments used for the continuous and intermittent measurement and control of the pipe liquid flow ,which are typical of Volumetric flowmeter, feature large flow range ,low pressure loss, large viscosity range ,easy installation, high accuracy and can measure high temperature,high viscosity liquids with easy calibration .the meters are widely used for the flow measurement in the field of petroleum, chemical,chemical fiber,traffic,food industries and commerce,medical and sanitary departments.The oval gear flow meter is a kind of Positive Displacement Flow Meter. As the fluid being measured passes thru the meter, it rotates 2 oval gears in measuring cavity to displace a precise volume of fluid. A sensor detects the gear rotation to determine displaced volume and flow rate.

Material : PET(polyethylene terephthalate )

Thickness : 0.5 mm

Metal tube Rotameters are recommended for liquids or gases where process or operating conditions make all-metal construction desirable. This type of Rotameter is also useful for metering opaque fluids. These are very rugged and robust yet inexpensive for flow rate indication purposes. They can be used for opaque and turbid fluids at high operating temperature and pressures. The Flow is indicated by a pointer, which is magnetically coupled with the float that rises in a tapered tube with increase in flow.

We are offering involute gear hobs. Involute gear hobs are for generating gears of maximum accuracy. They are normally specified for processes, where no subsequent tooth finishing operations are required, or where improved accuracy before tooth shaving operations is required.

Material : HSS M-2, M35, T1, T42, M4, T5, PM ASP 30 or any special Required material

Offers spline milling cutters sprocket milling cutters. Available in ground relieved & form relieved profile in class a, b, c. These milling cutters are available in a set of 8 different form cutters from no.1 to 8 to cut any number of teeth in gears from 0.5 module to 40 module & 0.75 dp to 64 dp with conforming standards to bs, is, din.

In today’s World - for modern industrial production, particularly on mechanical & CNC mass production, tooling is one of the key factors pertaining for the performance of shaping and forming processes. Almost all tools employed for this purpose are made from high speed steels. The use of high speed steels has also gained increasing importance for chipless shaping, eg. for extrusion, blanking and punching tools.

Color : Golden

Material : Polyester

Width : 25 Inch

We are the leading stockiest, suppliers & exporters of HIGH SPEED STEEL & TOOL ALLOY STEEL in the market for providing excellent quality steel.

HSS GRADES: MOLYBDENUM GRADES: M2, M3/2, M4, M35, M42TUNGESTEN GRADES: T1, T4, T5, T15, T42 Sizes & Ranges of above HSS mentioned grades: ROUND DIA  Small Dia 20mm to 63 mm Medium Dia: 65 mm to 160 mm Large Dia: 165mm to 350 mm   FLATS: (W) 10mm – 250mm to (H) 20mm – 100mm x Length (meters) INTRODUCTION OF HSS In today’s World - for modern industrial production, particularly on mechanical & CNC mass production, tooling is one of the key factors pertaining for the performance of shaping and forming processes. Almost all tools employed for this purpose are made from high speed steels. The use of high speed steels has also gained increasing importance for chipless shaping, eg. for extrusion, blanking and punching tools. HSS chemical composition distinctly differentiates between W-, Mo- and W-Mo alloyed steel grades, which contain different amounts of carbon, vanadium and cobalt elements to strengthen its own occurrence. Characteristic properties HSS GRADES  working hardness High wear resistance High retention of hardness and red hardness Excellent toughness   STEEL PROPERTIES Standard grade for High Speed Steels; owing to its balanced composition has good toughness and cutting performance, hence many applications. HSS Containing cobalt content is a high performance steel with good cutting capability & ensures high red hardness and tempering retention. It is particularly suitable in thermal stress situations and for intermittent cutting. High Speed Steel with high molybdenum and carbon. It has high wear resistance, high red hardness and good toughness. With its low vanadium content, this grade has very good grind ability   APPLICATIONS High performance Gear Cutting Hobs, Shapers, Milling cutters, Bevel tools, of all kinds of highly stressed twist bits and taps, shaped shear blades, for working high strength materials, broaches. Cutting tools for roughing or finishing, such as: helical bits, milling cutters of all types, taps, dies, spindles, reamers, thread rolling tools, drill bits, circular saw segments. Impact tools and those used for working wood. Cold forming tools such as dies and punches for cold extrusion and cutting and fine cutting tools.

We offer Ground Thread Taps. Can also be manufactured according to standards- Din 371, Din 376, Din 529, Bs 949, Iso 529, Iso 2284, Jis B4430, As, etc. Available in tin coating, Ticn coating and tiacn coating Recommended for working on tough & string materials Coarse pitch taps in set of 3 pieces.

Glass Tube Rotameter is basically a Variable Area Flow Meter. The differential pressure across the annulus area is constant and the flow rate is measured as a function of the annulus area. Glass Tube Rotameters consist of a tapered glass tube mounted vertically in a frame with the small diameter at the bottom and large end up. The tube contains a free moving float that rests on the stopper at the base of the tube. When the liquid flows, the float rises until its weight is balanced by the up thrust of the fluid and the float reaches a position of equilibrium. At this position it indicates the instantaneous rate of flow. The flow rate can be read from the adjacent scale.

We offer Gear Shaving Cutters. These HSS cutters are supplied in conventional type, diagonal, plunge cut with a wide range of sizes according to the customer requirement. Cutters are designed with profiles to incorporate them with tip relief, depth crowning, lead crowning etc., on component. Shaving Cutters are mainly used for gear shaving in the automobile industry in large batch production, especially used in CNC high speed shaving machines