Genist Technocracy Pvt. Ltd. Barwala Road, Dera Bassi, Punjab

The construction of the Vertical Autoclave (GTA-001-B) is as per vertical autoclave design to meet the quality of international standard. The lid and locking system of Vertical Autoclave (GTA-001-B) is designed in such a way so as to get handled by a square handle at top. All the locking system and lid is made of thick gun metal duly chrome plated. The outer is made of square Shape and the water level and pressure is locked in an enclosure while the castor wheels are provided at the bottom. The Vertical Autoclave (GTA-001-B) is supplied with complete IQ, OQ & PQ documentation. Constructional and Salient Features The outer body is rectangular in shape The lid and tightening system is provided of gun metal duly chrome plated It is complete with all the optional accessories thus having triple safety system It is supplied with extra heater which can automatically be used as & when required with separate switch Automatic water inlet valve Temperature controller cum indicator Validation port We can match this model with any world class autoclave Capacity 22 liter 40 liter 50 liter 78 liter 98 liter 150 liter Options Triple wall Double wall PLC controller instead of digital controller

The Vertical Autoclave (GTA-001-A) that we provide features an inner chamber that is made of SS 316. The complete unit is constructed of SS 304 and is also triple walled. The jacket outside the inner chamber of Vertical Autoclave (GTA-001-A) is made of SS 304. The Vertical Autoclave (GTA-001-A) unit is complete in all respect with automatic water inlet valve, temperature controller cum indicator, pressure stat, automatic water level indicator, and mechanical timer.Constructional and Salient Features Inner made of Stainless Steel and outer made of Mild Steel Supporting Ring & Legs are made up of Mild Steel Heater cover with stand Bucket are made of Stainless Steel Sheet Lid is made of thick machined Mild Steel plate lined with Stainless Steel from inside Lid is fitted with Pressure Gauge, Spring Loaded Safety Valve, Manual Exhaust Valve, and water level indicator Drain Valve facilitate easy cleaning of the chamber Fitted with silicon rubber gasket All internal joints are argon arc welded Pressure Control Switch and Low Water Level Cut-Off system for general safety of the element Operating range from 15psi to 22psi pressure To work on 220/230Volts, 50/60Hz AC supply Options PLC Controller Provider Double wall /Triple Wall

Horizontal autoclave is triple walled. Inner Chamber is made of SS 316. All other chambers, boiler, lid and radial arms made of SS 304. Robust and weld all argon welded construction. The door is have self-locking safety system Pressure is controlled from 1.2 to 1.5 Kg.cm2. Provided with multiport valve for easy operation. Supplied with complete IQ, OQ& PQ documentation. This Equipment is complete with PLC Controller, 8 channel automatic recorder. 4 Different piezostat at different depth to give uniform temperature and preStainless Steelure. Construction Robust and rugged all weld construction which is leak proof unlike riveted construction. Inner chamber is made of thick plate of Mild Steel of non magnetic stainless steel of 304316 quality and jacket is made out of rolled steel.

the portable stainless steel autoclave is constructed of stainless steel 304316. This portable stainless steel autoclave is suitable of general laboratory use as well as for field sterilization of instrument stand dressings, etc. Dome shaped stainless steel lid is provided with the portable stainless steel autoclave, which seals the autoclave with neoprene or silicone joint less gasket. The lid gets tightened to the body when closed. We make available the portable stainless steel autoclave at market leading prices. construction and salient features the working pressure is 1.1 to 1.2kg.cm2 (15- 18psi) the sterilizer is made of stainless steel. Sheet deep drawn to cylindrical shape the seamless construction allows no bacteria residue & free from dirt accumulation it is equipped with dial pressure gauge 0-30psi, spring loaded safety valve, dead weight type safely valve and steam release valve the load is held in dressing drums (optional), which is supported on a stand (tripod) the autoclave is hydraulically tested at twice the working pressure as per isi requirement it is fitted with isi marked heater supplied complete with plug & cord suitable to work on a. 220230 volt, | b. Single phase, | c. 50 hz, ac | d size : 350 ×300, d x h .

Brand Name : GTA-002

We offer the highly efficient Pharmacy Freezer to our clients at affordable prices. The Pharmacy Freezer offered by us is available in different capacities as per the requirement of the clients. The Pharmacy Freezer is manufactured by using the modern technology and high-grade materials. Our Pharmacy Freezer features excellent finish, sturdy construction, easy maintenance and high performance. Construction and Salient Features GTPL is providing Deep Freezer chest type with different capacities, frozen and canned door locked. Electronic controls and digital alarm Equipment designed for Research Laboratories. Inner Chamber of S. Steel Outer GI Powder Coat finish or S. Steel Extremely efficient Insulation; sufficiently thick to minimize heat loss. Chest type available HorizontalVertical Version Inner S.S. door to avoid temperature loss. Deep Freezer : ambient to -20oC to -86oC ThermostatDigital Controller mP (Micro) Digital Temperature Controller cum indicator Temperature Receiving Time : Depend upon capacity & temperature range Acrylic door provided Instructions To be stored in A.C. Rooms & Use of AVSServo Controlled Voltage Stabilizer is strongly recommended. Inner Chamber is made of G.I. sheets and is insulated with high density expanded polyurethane (PUF) Insulation for minimum temperature loss. Outer M.S.G.I. Sheet body pretreated & duly power coated. AudioVisual alarm provided for rise in temperature. CFC & HCFC Free Castor wheels for case of mobility. Refrigeration system and electrical circuit easily serviceable Suitable to work on 220- 240V, Single Phase, 50 HZ, AC supply.

Brand Name : Genist

We are offering Mortuary Chamber in which the inner chamber is made of heavy gauge stainless steel sheet of SS-304 grade or anodized aluminum sheet or G.I. (as per the customer's requirements). The 100 mm gap between the walls is filled high grade poly urethane insulation, which ensures maximum thermal efficiency of outer panels. All our Mortuary Chambers are made of galvanized sheets having a superior bacteria resistance film coating for greater hygiene. The interior of our Mortuary Chamber is constructed of high-grade stainless steel sheets of grade SS-304, thus making it easier to clean and ensure greater stability and life. The doors are connected by very sturdy chrome plate hinges and fitted with hard chrome plated lubricated latches for opening the door. The doors are made of galvanized steel sheets, lined with stainless steel for extra protection and long life. All the doors are fitted with high quality neoprene rubber gaskets for air tight fittings. The floor of our Mortuary Chamber is constructed out of hardened and reinforced steel sheets containing spills for easy cleaning and hygiene. The unit is provided with very sturdy castors. All the chambers of the mortuary freezers are provided with individual multi channel lock for safety and security.   Construction and Salient Features The inner chamber is made of heavy gauge stainless steel sheet of SS-304 grade or anodized aluminum sheet of G.I. (as per the customer's requirements). The 100 mm gap between the walls is filled high grade poly uretherane insulation, which ensures maximum thermal efficiency Outer panels of all our mortuary chambers are made of galvanized sheets having a superior bacteria resistance film coating for greater hypgiene The interior of our morgue chambers are consturcted of high grade stainless steel sheets of grade ss-304, thus making it easier to clean and ensure greater stability and life. The doors are connected by very sturdy chrome plate hinges and fitted with hard chrome plated lubricated latches for opening the door. The doors are made of galvanized steel sheets, lined with stainless steel for extra protection and long life. All the doors are fitted with high quality neoprene rubber gaskets for air tight fittings The floor of our mortuary chambers are constructed out of hardened and reinforced steel sheets containing spills for easy cleaning and hygiene. The unit is provided with very sturdy castors All the chambers of the mortuary freezers are provided with individual multi channel lock for safety and security. An energy efficient cooling unit is installed in our mortuary chambers. We use ISI marked high end CFC free compressors of kirloskar/Tecumseh make, conforming to latest international standards and guidelines Temperature range of our standard mortuary chamber models are 2oC to 8oC. / - 15o C to +10oC. However we have the capacity to modify the same to suit the individual specialized requirements of our customers. (The above given temperature could be achieved too) The temperature inside our mortuary chamber is controlled through programmable micro-processor based temperature controller cum indicator. Temperature inside our chamber is controlled with a sensitivity of + 1o c or better An audio visual temperature alarm is provided in the unit for protection during temperature fluctuations. Our mortuary chamber are provided with door operated illumination system comprising of fluorescent lights Front panel of our units comprises of on/off switches cooling and mains indicator lamps, temperature controllers and voltmeters. Temperature Sensitivity + oC, 1 or better Spatial deviation in Temperature + oC, 1 or better Readability oC, 0.1 Temperature range oC, 2o C to 8oC / -15oC 8oC (Standard Temperature Sensor, PT-100 Temperature controller, Solid state digital controller /Pid Display, optional Adjustable alarm limits, Led/Lcd Water quality, optional with Pid controller only III Morturay storage system is designed for storing cadaverous under cool condition to prevent decomposition. The latest development in mortuary technology offering vast space advantage over the conventional type together with greater hygiene useful for hospitals, Railways & Airports double-walled with mild steel/pre fabricated panels for out surface and stainless steel inner chamer with insulation between. Front opening, hinged insulated doors lined with magnetic gasket, handle and lock arrangement wiht keys in duplicate individual dead bodies. Trays to carry dead bodies with handles both ends, travel on rollers fitted for easy movement. Extra surface in chemically trated, antitrust coated and duly with powder coated paint. To avoid any moving part inside cabinet, for easier maintenance and cleaning refrigeration un kept outside the chamber and fixed at rear. Temperature of 2oC +5oC is maintained by hermetically sealed refrigerator compressor unit and is controlled by an automatic electroni solid st digital temperature controller cum indicator temperature controller is mounted on front panel, provided on fro top, along with pilot lamp, main switch etc. Supplied complete wiht trays, cord and plug. Suitable to work on 220 V, single phase, 50 Hz, Ac supply. Our mortuary chambers are made of corrosion free metal components with advance poly uretherane insulation ensuring maximum thermal efficiency and durability. Corrosion free exterior and interior designed for long storage of cadaverous Environmental friendly CFC free cooling Special design ensuring best hygiene Special loading trolley Digital temperature indication Micro processor based temperature control Audio visual alarm for high and low temperature PUF insulation Reliable Energy efficient Sturdy construction Low maintenance Light weight Door with glass GTPL mortuary chamber is double walled cooled units. Outer body of our ortuary chambers are constructed out of thick stee/aluminum sheets, Painted with long lasting stove enamel or elegantly powder coated. The inner chamber is made of heavy guage stainless steel sheet of SS-304 grade or anodized aluminum sheet or G.I. (as per the customer's requirements). The 100 mm gap between the walls is filled high grade poly uretherane insulation, which ensures aluminum sheet or G.I. (as per the customer's requirements). The 100 mm gap between the walls is filled high grade poly uretherane insulation, which ensures maximum thermal efficiency Outer panels of all our mortuary chambers are made of galvanized sheets having a supeior bacteria resistance film coating for greater hygiene Teh interior of our margue chambers are constructed of high grade stainless steel sheets of grade ss-304, thus making it easier to clean and ensure greater stability and life The doors are connected by very sturdy chrome plate hinges and fitted with hard chrome plated lubricated latches for openinig the door. The doors are made of galvanized steel sheets, lined with stainless steel for extra protection and long life. All the doors are fitted with high quality neoprene rubber gaskets for air tight fittings. The floor of our mortuary chambers are constructed out of hardened and reinforced steel sheets containing spills for easy cleaning and hygiene. The unit is provided with very sturdy castors All the chambers of the mortuary freezers are provided with individual multi channel lock for safety and security An energy efficient cooling unit is installed in our mortuary chambers. We use ISI marked high end Cfc free compressors of kirloskar/tecumseh make, conforming to latest international standards and guidelines Temperature range of our standard mortuary chamber models are 2o c to 8o C. / - 15oc to + 10oC. However we have the capacity to modify the same to suit the individua specialized requirements of our customers. (The above given temperature could be achieved too) The temperature inside our mortuary chamber is controlled through programmable micro-processor based temperature controller cum indicator. Temperature inside our chamber is controlled with a sensitivity of + 1o c or better An audio visual temperature alarm is provided in the unit for protection during temperature fluctuations. Our mortuary chamber are provided with door operated illumination system comprising of fluorescent lights Front panel of our units comprises of on/off switches cooling and mains indicator lamps, temperature controllers and voltmeters. Temperature sensitivity + oC, 1 or better Spatial deviation in temperature + oC, 1 or better Readability oC, 0..1 Temperature range oC, 2o C to 8 oC/-15oC 8oC (standard Temperature sensor, Pt -100 Temperature controller, solid state digital controller / pid Display, optional Adjustable alarm limits, led/lcd water quality, optional with pid controller only. Temperature variation adjustments Temperature sensors, 3 (with pid controllers only Automatic temperature setting, Pt-100 Adjustable limits, yes (with Pid controllers only Efficient condenser with automatic Air circulation, evaporating system (condensate Refrigerant : Lux, forced Light Intensity (Both sides) : Lux, R134 Non Cfc   Size Single Body Two body Three Body Four Body Five Body Six Body   Accessories 1 Printer report program 2 x 24 characters Lcd display Optional access port 30 mm optional castors lockable optional   Power Consumption, Yes I Nominal Power : W Nominal Voltage : V, 950-1450 Frequency : Hz, 220-230 volts, 50 hz single

Brand Name : GENIST

Shape : Horizontal

Warranty : ONE YEAR

Chamber Volume : 30-300 LITERS

The Laboratory Hot Plate that we are providing is the most efficient in functionality. Our clients can avail from us a thick gauge mild steel (MS) body Laboratory Hot Plate, which is highly demanded in the market. Laboratory Hot Plate is equipped with a thick, well machined and smooth cast iron top, which is grooved from the bottom to circulate spiral heaters. Herein, the heating element is housed into the grooves with porcelain beads underneath of the cast iron. Our clients can avail Laboratory Hot Plate at affordable prices. Specifications A thick gauge Mild Steel (M.S.) body A thick well machined and smooth cast iron top. This cast iron is grooved from bottom to circulate spiral heaters. Heating element is housed into the grooves with porcelain beads underneath of the cast iron. GTPL is the only manufacturer using grooved cast iron top with best quality for uniform heating. Hot plates manufactured according to the industries standards to suit very high corrosive atmosphere and ensured long life performance. Other Features Maximum surface Temperature 300 Deg.C. Excellent corrosion-resistance Long serving life

“GTPL" brings the ultra-high-tech Triple walled Microprocessor controlled, solid-state Orbital Incubator Shaker in the market. Specially designed for orbital shaking, the Incubator Shaker works under controlled incubations or temperature required for tissue cultures fermentation studies, & ageing tests, life science applications & growth studies. This Incubator Shaker features robust construction as the outer chamber is made of Mild Steel that is duly pre-treated & finished with powder coated paint for a lasting finish. The Inner chamber of this Incubator Shaker is made of stainless steel sheet (304 grade).   Salient Features & Construction Robust construction outer chamber is made of Mild Steel duly pre treated & finished with powder coated paint for lasting finish Inner chamber made of Stainless Steel Sheet (304 Grade) Fitted with durable coaxial blower for forced air circulation at triple walled back to maintain temperature uniformity in the chamber Outer front double walled door is insulated and is fitted with magnetic tape for air tight closing for no temperature loss, provided with lock and key arrangement Fitted with Universal Platform to accommodate interchangeable clamps of assorted sizes for different capacity of flasks Stationery shelves made of Stainless Steel (SS-304) for use of the unit as a standard B.O.D. Incubator, can be supplied at extra cost Door operated illumination lamp is fitted inside the chamber for easy visibility A full view inner plexi-glass door enables inspection and monitoring of inner chamber specimens without disturbing the process temperature High grade PUF/Glass Wool INSULATION between outer and inner chamber for minimal thermal losses Heating elements are placed in the path of moving air duly insulated from the body Control panel having all controls and circuitry are housed at the top fitted with Temperature controller cum Indicator Microprocessor based with LED display for Set Value (SV) & Process Value (PV) to select any desired temperature provided with Volt meter on the panel to read the incoming voltage. Caster wheel mounted for easy portability Supplied with cord and plug Operating Voltage : 220 Volts AC (50 Hz)

the horizontal rectangular autoclave that we provide features sturdy and rugged all weld construction which is leak proof unlike riveted construction. Inner chamber of the horizontal rectangular autoclave is made of thick plate of mild steel of non magnetic stainless steel of 304316 quality and jacket is made out of rolled steel. Our clients can avail the horizontal rectangular autoclave at the most competitive rates.   applications construction robust and rugged all weld construction which is leak proof unlike riveted construction. Inner chamber is made of thick plate of mild steel of non magnetic stainless steel of 304316 quality and jacket is made out of rolled steel sterilizers will have single door made out of rolled steel lined with stainless steel sheet on both sides all the sterilizers are hydraulically tested to withstand 2.5 times the working pressure the steam jacket is lined on the outer side with asbestos sheet or glass wool which prevents heat losses due to radiation and is covered by strong rolled steel sheet duly painted boiler made of thick stainless steel plate suitably located under the sterilizer. High grade flanged type heating elements are fitted from front side for easy replacementrepair fitted with water gauge glass for water level, safety valve, water inlet and drain valves it is also provided with low water level cut off device. This device protects the heater in the generator from burning out dry all units are hydraulically tested up to 40psi drain valve is fitted at the side bottom for easy drainingcleaning triple walled with steam jacket and separate boiler. Sterilization cycle is controlled by multiport valve. The unit is fitted with all standard accessories to work on 440volts, 3 phase, a.c. Supply options the steam pressure in the boiler is indicated on an individual pressure gauge. Safety lock for door every horizontal rectangular sterilizer is fitted with self locking safety door which cannot be opened when the chamber is under pressure. The sterilizer is provided with triple safety. unit is also fitted with low-water level cut-off device and automatic pressure control device fitted with vacuum breaker to break vacuum in case of formation of vacuum due to steam condensation. plc controller instead of digital controller 20% extra charges for double door.   autoclave rectangular for pharma sector double door steam sterilizer, hinged door for hphv cycle. fully automatic plc controlled. this equipment is complete with plc controller, 8 channel automatic recorder. 4 different piezostat at different depth to give uniform temperature and pre stainless steelure. .

Brand Name : GTA-004

the horizontal cylindrical autoclave that we provide features double or triple walled unit that is horizontally mounted on a sturdy and heavy stainless steel. Both inner chamber and outer wall of this horizontal cylindrical autoclave is made of stainless steel. The horizontal cylindrical autoclave is provided with an option of automatic vacuum breaker that breaks the vacuum in case of formation of vacuum due to steam condensation. We make available the horizontal cylindrical autoclave at very reasonable prices. applications double triple walled unit horizontally mounted on a sturdy, heavy stainless steel both inner chamber and outer wall made of stainless steel pressure is adjustable from 5-20psi fitted with pressure gauge, safety valve and steam release valve available with separate boiler for units fitted with s.s. Boiler, separate valves for injecting the steam into the main chamber and releasing the steam in atmosphere after use are provided fitted with automatic pressure control switch fitted with dial thermometer to indicate the inner chamber temperature lid is made of s.s. Plate provided with radial locking system industrial grade energy efficient heaters reduce power bills drastically as per the international standards and guidelines our triple walled horizontal autoclave have a working temperature of 121oc., however for specific requirements our autoclaves can be upgraded to be used for up to 134oc options automatic vacuum breaker is provided to break the vacuum in case of formation of vacuum due to steam condensation automatic low water level cut-off device fitted for general safety of the element plc controller instead of digital controller 20% charges extra for double door in all sizes double door .

Freeze drying is the process of removing the moisture from a biological product while maintaining the integrity of the products, biological & chemical structure and activities. Freeze drying technology is used in particular for the removal of moisture from the products usually of biological origin without causing any noticeable change in the original characteristics. Freeze drying is also the preferred process in the field of Pharmacy, Chemistry and in conservation of food. We are the known provider of Freeze Dryer in the market. Our Freeze Dryer features sturdy construction and offers efficient performance. We provide Freeze Dryer to our clients at very nominal prices. Advantage of Freeze Dryer Heat-sensitive biological materials may be freeze-dried without affecting their potency. The dried materials may be stored for years at room temperature without loss of their original characteristics. The freeze-dried material may be transported and shipped in small containers, and no provision is necessary for refrigeration en route. Bacterial growth and enzyme action do not take place in freeze-dried products. Proteins do not coagulate. Oxidation of many materials such as hemoglobin and vaccines is completely prevented when drying and sealing is done under high vacuum.

Ethylene oxide gas sterilizers are designed to be used with Ethylene oxide gas cartridge to provide a safe & effect temperature sterilization process for Hospital , Cath Lab , Medical Institutions, Eye Specialists, ortho Specialists Etc. Every cycle there is a Leak test period; which checks the leakage and aborts the cycle if there is a leakage in the system. Negative chamber pressure ensures that gas cannot escape into operating area. Constant watch over entries and break diagnostic from automation, which warns the operator, by means of messages on indicator and buzzer.

We are offering deep freezer is double walled.the outer is made of crc and painted with powder coating or made of elegantly pre painted sheets.inner is made of ssaluminum foil chemical rersistance shiny and plastic moulded sheet.

in biology, an incubator is a device that is used to grow and maintain microbiological cultures or cell culture. The co2 incubator maintains optimal temperature, humidity and other conditions such as the carbon dioxide and oxygen content of the atmosphere inside. Co2 incubators are essential for a lot of experimental work in cell biology, microbiology and molecular biology. The co2 incubator is used to culture both bacterial as well as eukaryotic cells.   construction and salient features one chamber co2 incubator with work chamber volume approx. 150 liters air jacketed heating system (not direct heating system) with temperature control by microprocessor temperature range from ambient ±3oc to ±55oc temperature deviation with respect to time is ±0.1k co2 control by microprocessor based and by heat resistant thermal conductivity detector to withstand heat of decontamination co2 range 0 to 20% or better and co2 accuracy ±0.1% by volume, co2 recovery time for 5% co2 : less than 5 min the system shall be having interactive control with touch screen fast recovery time for temperature, co2 and humidity temperature recovery time at37oc: _10 min. humidity recovery at 95% rh _20 minutes the system shall be having built-in automatic decontamination facility to remove bacteria, fungi, spores, mycoplasma etc. Without removing sensor, fan or any other fitting. the system would employ automatic decontamination routine at moist heat of 90oc or dry heat of 180°c at least 3 numbers stainless steel perforated shelves would be supplied interior chamber would be made of stainless steel with electro polish finish to have highest quality of inner surface with rounded corners on all sides for easy cleaning. No plastic should be inside to avoid voc. built-in audible and visual water level alarm would be available when the water reservoir needs to be refilled to ensure a constant high level of humidity suitable for 230 v, single phase 50 hz operation. suitable servo voltage stabilizer with high voltage low voltage cut off circuit, auto reset with delay timer and spike eliminator etc. And double stage co2 pressure regulator with stainless steel diaphragm. it would be include 3 numbers of 18 kg or more co2 cylinders with regulators. optional accessories timer air circulating fan digital indicator in lieu of l-shaped thermometer digital indicator – cum – controller electronic in lieu of l-shaped thermometer & thermostat micro processor based pid temp. Controller-cum-indicator in lieu of thermostat & l-shaped thermometer .

We provide most versatile and highly reliable low temperature BOD Incubator to make biochemical oxygen demand determinations and for preservation of vaccines, insulin, lever extracts, chemicals etc. The BOD Incubator that we provide features robust construction, in which, the outer cabinet is made of M.S. Sheet, duly pre-treated & finished with epoxy powder coated paint for a lasting finish. The inner chamber of the BOD Incubator is made of highly polished stainless steel. Our clients can avail the BOD Incubator at very reasonable price. Applications : Most versatile and highly reliable low temperature incubator, to make Biochemical Oxygen Demand determinations and for preservation of vaccines, insulin, lever extracts, chemicals etc.Construction and Salient Features Robust Construction Outer cabinet is made of M.S. Sheet, duly pre treated & finished with epoxy powder coated paint for lasting finish Inner chamber is made of highly polished stainless steel. It has provision for allowing wide range of shelf positions & spacing. SS trays are also provided. The outer chamber may also be provided of mat finished Stainless Steel. Chamber is duly insulated to minimize heat loss. Two doors are provided. Outer door is insulated and is fitted with magnetic tape for air tight closing for no temperature loss. Door is provided with lock and key. Inner door is made of transparent acrylic/ glass for inspecting the specimens inside chamber, without opening the door and with minimum temperature loss. The heart of the GTPL B.O.D. Incubator is the excellent and reliable solid state temperature controller cumindicator digital display, range from 5oC to 50oC ± 0.5oC. Hermetically sealed, Dan Foss / Emerson Copeland high performance compressor works efficiently to lower the inside chamber temperature. Heating elements are placed in the path of moving air duly insulated from the body. Cooling coils also lie in the air circulation path. Air is circulated by a double shaft self-cooled, blower to keep the uniform temp. Through out the inner chamber A safety thermostat is provided, which switches off the heaters in the event of failure of the normal temp. control system to protect the specimens from excessive heat. A highly insulated CFC free PUF System is provided to avoid loss of energy. All controls and circuitry are housed at the top of the incubator and therefore protected from spillage. Separate indicator lamps for mains, heating and cooling are fitted. Temperature setting is by finger touch fine and coarse for the user to set any desired temp. A Voltmeter is provided on the panel to read the incoming voltage. Fitted with automatic built in stabilize

Incubators are sturdy, with double walled construction and complete inner chamber that is made of anodized aluminum or highly polished stainless steel. Outer chamber of Bacteriological Incubator is made of mild steel sheet, finished with powder coated paint and the 75 mm gap between the walls is filled with special grade glass wool for proper insulation and to avoid heat losses. Inner chamber of the Bacteriological Incubator is fabricated with ribs for adjusting shelves to convenient height. It is supplied with two or three removable shelves that are made of fully anodized aluminum sheet or polished stainless steel sheet as per chamber. Door is insulated & fitted with heavy hinges and has double glass window, which facilitate inspection of samples without opening the door. Heating elements, made of high grade imported ni-chrome wire are put inside the porcelain beads and placed at the bottom and side ribs for uniform temperature all over the space.ConstructionBacteriological Incubators is perfect for different experiments in microbiology, Institutes, industries, R&D labs, and all that. Bacteriological Incubators outer body made of mild steel sheet duly powder coated. Inner chamber and perforated trays made of stainless steel (SS-304). Space between inner chamber and outer wall is filled with high grade mineral wool for minimal heat dissipationTemperature ControlTemperature is controlled by imported capillary type thermostat from ambient to 80°C. Temperature control knob is graduated in centigrade degrees after actually observing the temperature in steady state. An L-shaped prismatic glass Thermometer is fitted on top of the Incubator for reading the chamber temperature.Ventilation : Air ventilators are provided on both sides at top to flue away any gas or fumes.Control PanelThe equipment is provided with a panel having a thermostat control knob, On/Off switch and two pilot lamps. Power Requirement: – Supplied with cord and plug suitable to operate on 220 V single phase, 50 Hz, AC supply.Optional Accessories Timer Air Circulating Fan Digital Indicator in lieu of L-shaped thermometer Digital Indicator – cum – Controller Electronic in lieu of L-shaped thermometer & thermostat Micro processor based PID Temp. Controller-cum-indicator in lieu of Thermostat & L-shaped thermometer

The Dry Heat Sterilizer is used to sterilize and depyrogenizing metal or glass wares that includes injection bottles, ampoules, infusion bottles, etc. The Dry Heat Sterilizer that we provide is highly efficient in performance and fabricated by using the latest techniques. Dry Heat Sterilizer use dry heat instead of steam to sterilize equipment. Dry Heat Sterilizer is thus, free from corrosion and any sort of malfunctioning. Highlights Sturdy construction Corrosion resistant Efficient performance Easy-to-operate

We are involved in providing the highly efficient Grinding Mill to our clients at market leading prices. The Grinding Mill that we provide is fabricated by using the modern techniques and under the supervision of experts so as to provide desired results. The Grinding Mill that we provide is highly acclaimed in the market owing to its sturdy construction, high efficiency, and durable finish.   Highlights Sturdy construction High efficiency Durable finish Easy-to-operate

We are offering highly efficient Environmental Growth Chamber at very economical prices. The Environmental Growth Chamber is fabricated by using the latest techniques and high grade materials so as to make it durable. The Environmental Growth Chamber is available in different dimensions and specifications as required by our clients.   Highlights Sturdy construction Longer service life Highly durable Easy-to-operate

We are engaged in providing the highly efficient range of Heating Mantles to our esteemed clients at reasonable prices. These Heating Mantles are designed and fabricated under the strict supervision of skilled experts. The Heating Mantles are used for the purpose of heating or boiling the glass flakes. These Heating Mantles features a heat resistant body and also powder coated paint which enhances its worth.Highlights Smooth operation Sturdy construction Heat resistant body

The Melting Point Apparatus is used to measure the exact melting point of different medicines and other substances like perfumes, dye-stuffs, organic crystal substances so as to determine their purity. The measurement method of a Melting Point Apparatus conforms to the standards of pharmacopoeia. The Melting Point Apparatus that we offer provides accurate results and possess light weight, which makes it portable. Highlights Accurate Light weight Affordable

The Orbital Shaker Incubator that we provide is highly efficient and provides accurate results. The Orbital Shaker Incubator is precisely designed and fabricated so as to suit the numerous IS Standards. Orbital Shaker Incubator is widely used in the various industries such as research laboratories, hospitals, medical and agriculture. We provide Orbital Shaker Incubator at very affordable price to our clients.   Highlights Long life Sturdy construction Low maintenance Economical