Compressor Oil Dealers in Dhanbad

We are offering castrol compressor oil. castrol compressor oil are fully synthetic lubricants formulated for long service life and clean deposit-free operation. Castrol compressor oil are manufactured in several viscosity grades to satisfy the lubrication needs of essentially all air compressors and compressors of many other process gases as well. tribol 890 light for rotary compressors, iso vg 32sae 10w tribol 890 medium for rotary compressors,iso vg 68sae 20 tribol 890 heavy for reciprocating compressors,iso vg 100sae 30   the base fluids in tribol 890 synthetic oils are made from polyol and dibasic-acid ester, synthesized and blended specifically to optimize properties vital to good compressor operations. They have a natural stability against decomposition and oxidation at high operating temperatures and thus a low tendency to form lacquers or deposits. The synthetic base fluids also have very low volatility and high flash and autoignition temperatures. Tribol 890 oils are designed for excellent natural oil film strength and lubricity and are additionally formulated with load-carrying, antiwear additives. An advanced technology additive system also enhances oxidation stability, inhibits foaming, and protects against corrosion. Tribol 890 compressor oils are not corrosive to either ferrous or non-ferrous metals.   by replacing conventional petroleum oils with tribol 890 synthetic oils the following benefits are possible : significantly extended service life cleaner, more deposit-free operation safety from deposit ignition, fire, and explosion increased efficiency by eliminating recompression   applications rotary vane and rotary screw compressors : where circulation systems inject oil directly into the air stream to lubricate, cool, and seal the compressor. Tribol 890 light and tribol 890 medium perform better than petroleum oils in flooded rotary vane and screw compressors. By minimizing varnish and carbon deposits, tribol 890 can extend drain intervals from 1,000 hours to more than 5,000 hours in most vane compressors and sometimes to well over 8,000 hours in flooded screw compressors. reciprocating compressors : tribol 890 heavy is used for both crankcase and upper cylinder lubrication in reciprocating compressors. Crankcase drain intervals can be greatly extended and significant reductions in valve inspections and cleaning are possible. Lower volatility permits lower feed rates to reduce carryover and deposit formation. hydraulic and circulating systems, gear, bearings : wherever rust and oxidation inhibited (r&o) turbine type of circulating oils are specified. Tribol 890 is particularly well suited where operating temperatures and ranges are extreme or marginal for petroleum oils.   advantages in rotary vane and rotary screw compressors lower volatility means less oil contamination of plant air, greater demister efficiency, less maintenance of filters and separators, and reduced oil consumption. Superior oxidation stability and natural cleansing action prevent the formation and buildup of varnish, sludge, or deposits. This minimizes wear and maintains clearances for maximum compressor efficiency and for optimum cooling and sealing. In single or multiple-stage reciprocating compressors - formation and buildup of varnish and carbon deposits are all but eliminated to prevent valve wear of sticking which allows recompression. The resulting benefits are less heat generation and reduced fire potential as well as reduced energy input required for constant discharge capacity. General advantages in all operations : greatly extended oil life in circulation systems and crankcases - 4 to 8 times longer than petroleum oils. lower maintenance and labor costs incurred from less frequent oil change, filter, and accessory service, inspection, and removal of deposits, and parts replacement. improved profits from fewer production interruptions. year-round service from a single product with extreme low and high temperature range. compatibility with virtually all seals and construction materials used in modern compressor systems.   notes changeover from petroleum oils to tribol 890 should always be preceded by a very thorough cleanout. Although 890 oils are compatible with petroleum, any residual mineral oil will soon oxidize and contaminate tribol 890, shortening the anticipated service life (see tb2190 "compressor changeover cleanout is essential"). Tribol 890 oils soften polycarbonate and should not be used with this material. Under no circumstances should these fluids be used where neoprene seals and e.p.d.m. Elastomer sealing materials are present anywhere in the air system. For specific terms, conditions, warranty, and availability, refer to tribol price list in effect at time of purchase.