Digital Insulation Tester Dealers

• Application: Control Panels
• Frequency: 45Hz, 66Hz
• Power Source: Electric
• Feature: Easy To Use, Electrical Porcelain, Four Times Stronger
• Automation Grade: Fully Automatic
• Temperature Capacity: High Temperature, Low Temperature, Medium Temperature
• Puncture Voltage : 11000V, 220V

We are the trusted Exporter & Supplier of Water Insulation Resistance Tester. It is widely accredited for its precise construction and accuracy in results. We have associations with reliable vendors and our team of quality inspectors stringently checks each and every piece of Water Insulation Resistance Tester before procurement. In addition, we make available our Water Insulation Resistance Tester at the most competitive rates.

• Brand Name: UNI-T
• Color: Red and Grey
• Model Name/Number: UT513A
• Usage/Application: Industrial
• Test Voltage (Volt): 100V, 250V, 500V, 1000V, 1500V, 2500V, 5000V
• Insulation Range(Ohms): 1000Gohm (1TOhm)
• Test Current (Ampere): 3.5mA

• Brand Name: CROWN
• Color: Sky Blue
• Condition: New
• Power Source: Electric
• Automation Grade: Automatic, Semi Automatic
• Application: Voltage Testing, Industrial, Research, Laboratory
• Certification: ISO 9001:2008 Certified

HIGH VOLTAGE BREAKDOWN TESTER -MODEL - CES 403RANGE - 0 - 3KV AC/30mACURRENT LIMIT : Settable from 10% to 100% through continuously Variable controlMETER : Two Digital meters to monitor voltage & Leakage CurrentACCURACY : ±1% of ReadingPOWER REQUIREMENT : 230VAC OPTIONAL:TIMER : 3 Digit, setable from 0-999Sec

• Power: 230V AC, ± 10 %, 50
• Output Voltage: 10
• Output Current: 0.001

This is also suitable for external liquid applied epoxy and epoxy modified coatings. Epoxy resins are excellent electrical insulators and protect electrical components from short circuiting, dust and moisture. Most coating includes both amine and anhydride curing compositions, therfore resistibvity becomes important factor for testing. Instrument requires flat or curved samples of 150mm diameter. All the easy connections made and it is ready to use instrument

• Power Source: Electric
• Automation Grade: Automatic
• Application: Industrial Use
• Feature: Easy To Use, Superior Finish
• Country of Origin: India
• Operating Current: Single Phase
• Temperature: 0 to 50 Degree C

• Brand Name: Motwane
• Automation Grade: Automatic
• Application: Control Panels
• Packaging Type: Paper Box
• Frequency: 45Hz
• Warranty: 1year
• Country of Origin: India
• Model Number: IT-51
• Range (ohms): 1 Terra Ohms
• Display Type: Digital

• Country of Origin: India
• Brand Name: Fluke
• Meaurement Range: 2gm Ohm
• Test Voltage: 500 Volts, 1000 V
• Test Current: 1 Ma Nominal
• Auto Discharge: Discharge Time0.5 Second for C= 1 F or Less
• Weight: 550 Grams
• Dimensions LxWxH: 20.3 x 10 x 5 Centimeters
• Generic Name: 1503 Insulation Tester

• Power Source: Battery
• Automation Grade: Automatic
• Application: Industrial
• Feature: Easy To Use, Proper Working
• Type: Low Voltage Tester
• Country of Origin: India

Type CIE-5000 PI is a universal, Multi-purpose instrument for checking insulation and conductance during simulated operating conditions in high tension electrical and electronic fields. It is ideally useful for the electrical maintenance of Rotating plant machinery, Distribution networks, Communication cable, Insulators and servicing of Control and switching equipments, transformers and industrial installations. Di-electric Absorption test requires the voltage to be applied for several minutes. Operating an instrument under motor power allows this to be done easily. The high sensitivity of the instrument enables sensible reading to be obtained from such polarization index tests. (Polarisation Index = Resistance after 10 min./Resistance after 1 min.) It is a versatile mains operated insulation tester which is recommended for every electrical engineer. The CIE -5000PI is a smart microprocessor based 5KV Insulation Tester and analyser besides the conventional measurement of Insulation resistance upto 100.0G Ohm. It’s advance features allow one to automatically measure both the polarization Index and Dielectric absorption ratio, thus significantly simplifying the testing of transformers and motors. The Insulation Tester is a mains (230V AC , 50-60Hz) operated Insulation Tester and analyser. The test voltage may be chosen in between 1KV,2.5KV and 5KV. Due to its measurement principal (actual voltage and current readings) the accuracy of resistance measurement is not affected by any test voltage error. The built in chronometer automatically counts the elapsed time since the start of the measurement and shown over display by which user can easily understand the actual condition of the insulation testing (e.g. in DAR Mode or in PI mode or in IR mode)The measured values all are automatically hold over display until the instrument restart or off. The Test Voltage shown over-display at the time of measurement. SALIENT FEATURES High Voltage Out Put Indicator 16X2 Jambo LCD Display. Start/Stop Button KV Selection Switch (1KV, 2.5KV, 5KV) Mode Selection Switch (IR, DAR, PI) Terminals (LINE, EARTH, GUARD) Power Switch (BACK PANEL)

• Power Source: Electric
• Automation Grade: Automatic
• Application: Industrial Use
• Packaging Type: Paper Box
• Frequency: 45Hz
• Warranty: 1year
• Country of Origin: India

• Use: Industrial
• Pin Count6 Pin: 6 Pin

Buyers can stay rest assured for damage-free products from our end as we make use of quality packing material. We also fulfill different packing requirements of the clients such as customized or standard. Our company has all the necessary logistic resources and connection to make on time delivery of order(s). Product Details : Easy and Simple Operation Automatic range,indicated by different Leds Safety standard IEC 61010-1CAT IV 300V 1Ohm 100GOhm

We offer our clients with high quality Microprocessor Based Insulation Resistance Tester. These High Voltage Insulation Resistance Tester are manufactured as per the industrial standards by using high graded raw material and various sophisticated machines. We provide them with various accessories such as 10 meter mains lead and 15 meters test leads, Instruction & Operating Manual. The salient features are as follow: Microprocessor Based, Mains cum Internal Rechargeable Battery Operated. Digital IR Tester, Oil BDV set, HV,LV & GUARD terminals Polarization Index, Dielectric Absorption Ratio measurement. RS232 port to download DATA to PC with windows based Data Management Software. Internal discharge of object after test complete. Compatible to EMC/EMI environment

• Country of Origin: India
• Certification: ISO 9001:2008 Certified
• Weight: 0-200gm
• Voltage: 0-6VDC
• Condition: New
• Power: 1000W
• Driven Type: Electric
• Warranty: 1yr

• Color: Grey
• Model Name/Number: IR-100
• Test Voltage: 500 V DC
• Range: 2 to 100 Megaohm
• Display Type: Analog
• Body Material: Mild Steel
• Phase: Single Phase
• Shape: Rectangular

• Condition: New
• Type: Insulation Resistance Tester
• Frequency: 50 Hz
• Country of Origin: India
• Display Type: Digital
• Range: 500 m