Oscilloscope Dealers

• Warranty: 5yrs
• Operating System: For Windows
• Programming Language: Java
• Back Up: Yes
• Language Support: English
• Architecture: 32/64 Bits

Since the origins, CAD systems aim to replace the manual sampling with an accurate paper print.   In order to obtain a proper result, many points have to be taken in consideration as, for example, the dot gain, the color-matching, the simulation of the overlapping tone obtained on wet on wet printing, the raster application to the screen, the color viscosity and the printing order.   Thanks to Color Instinct it is possible to handle all those variables, simulating them on paper or on fabric (direct printing or transfer), and obtaining a level of imitation enough to get the final confirmation from customer and then move to the standard working procedure, from engraving to printing.   It also introduces some working procedure’s improvements: it is possible to make a proper evaluation of the design before engraving, to print and then valuate the proper adjustment, to identify problems related to the engraving or to the printing and then quickly fix them and to increase the number of proposal to the customers. All those options, will reduce the working times and costs. It wont be necessary to produce a large amount of sampling for sales campaign, production will be done only after sales confirmation.

Phosphor Oscilloscope, Digital Storage Oscilloscope, Clamp Meter, Multimeter

• Oscilloscopes: RTM3000 OSCILLOSCOPE

Bandwidth: 100 MHz to 1GHz Sample rate: up to 5 Gsample/s Memory depth: up to 80 Msample ADC resolution: 10-bit Display: 10.1’’ capacitive touchscreen

• FREQUENCY RANGE: 10Hz to 2MHz (-3db)
• MAXIMUM SENSITIVITY 20mV P/P Cm. at: 1KHz.
• ATTENUATOR: Three steps of 1:1, 1
• INPUT IMPEDANCE: Approximately 1M Ohm shunted by 40 pf.

2 MHz GENERAL PURPOSE OSCILLOSCOPE SPECIFICATION FREQUENCY RANGE : 10Hz to 2MHz (-3db)MAXIMUM SENSITIVITY 20mV P/P Cm. at 1KHz. :ATTENUATOR : Three steps of 1:1, 1: 10 and 1: 100 with in-between continuously variable control.INPUT IMPEDANCE : Approximately 1M Ohm shunted by 40 pf.  HORIZONTAL CHANNELMAXIMUM SENSITIVITY : 50mV P/P per Cm. at 1KHz. FREQUENCY RANGE : 10Hz to 1MHz (-3db)INPUT IMPEDANCE : Approximately 1M Ohm shunted by 40 pf.ATTENUATOR : Three steps of 1:1, 1: 10 and 1: 100 with in-betweencontinuously variable control.POWER REQUIREMENTS : 220V AC +_ 10%

  An oscilloscope is easily the most useful instrument available for testing circuits because it allows you to see the signals at different points in the circuit. The best way of investigating an electronic system is to monitor signals at the input and output of each system block, checking that each block is operating as expected and is correctly linked to the next. With a little practice, you will be able to find and correct faults quickly and accurately

• Features: Vertical two channel, bandwidth of each channel is 25Mhz, 60Mhz,100Mhz,,Real-time Max Sampling rate is 500MSa/s.,Support communication interface RS232, USB(main sub), RJ45 LAN,5.7 inch color display screen.
• Brand: HTC
• Usage: Industrial

We are offering siglent- handheld oscilloscope. siglent • bandwidth: 60mhz, 100mhz, 150mhz, 200mhz (various for different series). • real time sampling rate: 1gsas. • memory depth: 2mpts. • connections: usb device, usb host. • accurate measurement of resistance, diode, capacitance, continuity.

Features Dual channel, 25MHz analog bandwidthChannel. 100MSas Real-time sample rate of each channel, single collection in analog bandwidth. 25kChannel memory depth. High resolution display system, 320horizontal ×240 vertical pixels Auto-setting. Auto-measure and cursor-measure many kinds of parameter of waveform.

• Country of Origin: UK
• Type: PC/USB BASE DIGITAL OSCILLOSCOPE - PICOSCOPE

PicoScope 6400E models 6824E  6424E 6804E 6404E  6403E - 8-bit to 12-bit FlexRes® ADC - A choice of 4 or 8 analog channels - Add 8 or 16 digital MSO channels - Up to 500 MHz bandwidth - 200 ms capture time at 5 GS/s - Up to 4 GS capture memory - 50 MHz 200 MS/s 14-bit AWG - USB 3.0 interface - 300 000 waveforms per second update rate - PicoScope 6 software and PicoSDK included - 21 serial protocol decoder/analyzers included - Mask limit testing and user-definable alarms - High-resolution time-stamping of waveforms - Over ten million DeepMeasure™ results per acquisition  - Advanced triggers: edge, window, pulse width, window pulse width, level dropout, window dropout, interval, runt and logicPicoScope 6000E Series oscilloscope pack contents:-PicoScope 6000E Series PC oscilloscope-P2056 500 MHz 10:1 passive probes (4)(supplied with the PicoScope 6824E, 6424E, 6804E and 6404E)-P2036 300 MHz 10:1 passive probes (4)(supplied with the PicoScope 6403E)-Quick start guide-12 V power supply, universal input-Localized IEC mains lead-USB cable, 1.8 m-Storage / carry caseTA369 MSO pod pack contents-TA369 8-channel MSO pod-MSO test hooks (pack of 12)-MSO ground lead (8)-MSO ground clip 1-way (8)-MSO ground clip 4-way-MSO ground clip 8-way-MSO digital interface cable\-Storage / carry caseAccessories:PQ219 : 8-channel probe holder kit for PicoScope 6000E SeriesPQ215 : Probe holder kit, no probesTA437 : passive oscilloscope probe: 500 MHz 2.5 mm 10:1, BNC, single packTA480 : passive oscilloscope probe: 500 MHz 2.5 mm 10:1, BNC, dual packTA436 : passive oscilloscope probe: 300 MHz 2.5 mm 10:1, BNC, single packTA479 : passive oscilloscope probe: 300 MHz 2.5 mm 10:1, BNC, dual pack

As we have a wide distribution network, we are able to ensure our payment procedures are fast and simple. Additionally, we are capable of providing prompt payment discounts. We are well equipped with the most recent machines and technology that help us in conducting stringent check on the raw materials that are used while manufacturing.

• Application: Industrial Use
• Brand Name: Maxtech
• Bandwidth: 20 Mhz
• Channels: Dual
• Usage: Laboratory
• Data Logging Frequency Counter: 1 mV input sensitivity

• Brand Name: Chauvin Arnoux
• Bandwidth: 300 MHz
• Channels: 4 Isolated Channels
• Model Name: OX 9304
• Usage: Industrial
• Capacitance: 5nF to 5mF
• Resistance: 80 to 32
•  :  

Combines the functions of oscilloscope, multimeter and recorder in one. It adopts many dedicated chips which allow it to be highly integrated, have low power consumption and with a very small footprint, etc.

An oscilloscope is easily the most useful instrument available for testing circuits because it allows you to see the signals at different points in the circuit. The best way of investigating an electronic system is to monitor signals at the input and output of each system block, checking that each block is operating as expected and is correctly linked to the next. With a little practice, you will be able to find and correct faults quickly and accurately. Feature:   High luminance, internal graticule CRT Japanese electronic encoder,light,handy and reliable Fully sealed long live vertical mode switch ALT Triggering Function. Two independent signals simultaneous observation Build-in 6 Digit Frequency Counter 30MHz Dual Channel 10 times sweep magnification TV Synchronization-Y mode   Specification   Horizontal System Sweep time: 0.2uSec~0.5Sec/DIV,20steps in 1-2-5 sequence; Sweep time accuracy:±3% Vernier sweep time control:≤1/2.5 of panel-indicated ＆#118alue; Sweep magnification: 10 times; ×10MAG sweep time accuracy: ±5% (20nSec~50nSec are uncalibrated); Linearity:±5%,×10MAG: ±10% (0.2s~1us) Position shift caused by ×10MAG: within 2DIV. At CRT screen center   X-Y MODE: Frequency bandwidth: DC to at least 500KHz; X-Y phase difference:≤3°at DC~50KHz Sensitivity: Same as vertical axis. (X-axis:CH1 input signal; Y-axis:CH2 input signal.); CALIBRATION VOLTAGE Waveform: Positive-going square wave; Frequency: Approx. 1KHz; Duty ratio: Within 48:52; Output voltage: 2Vp-p±2%; Output impedance: Approx.1KΩ   CALIBRATION SIGNAL Waveform: Positive-going square wave; Frequency: Approx. 1KHz; Duty ratio: Within 48:52; Output voltage: 2Vp-p±2%; Output impedance: Approx.1KΩ   CRT Type: 6-inch rectangular type, internal graticule; Phosphor:P31; Acceleration voltage: Approx.2KV(20MHz)/Approx.12kv(40MHz); Effective screen size:8×10DIV[1DIV=10mm(0.39in)]; Graticule: Internal; Trace rotation: Provided   VERTICAL AXIS Sensitivity:5mV~5V/DIV,10 steps in 1-2-5sequence Sensitivity accuracy:≤3% Vernier vertical sensitivity: Continuously variable to 1/2.5 or less of panel-indicated ＆#118alue Frequency bandwidth: DC~30MHz(x5MAG:DC~7MHz)/DC~40MHz(x5MAG:DC~15MHz)DC~50MHz(X5MAG:DC~15MHz) AC coupling: Low limit frequency 10Hz. (With reference to 100KHz, 8DIV, Frequency response with-3dB.) Rise time: Approx.17.5ns (x5 MAG: Approx.50nS) Approx.8.75ns (x5 MAG: Approx.25nS) Approx.7ns (x5 MAG: Approx.23.3nS) Input impedance: Approx.1MΩ/Approx.25pF DC balance shift: 5mV~5V/DIV: ±0.5DIV, 1mV~2mV/DIV ±2.0DIV Linearity:1000:1 at 50KHz; >30:1 at 15MHz/>30:1 at 35MHz/>30:1 at 45MHz CH2 INV BAL: Balanced point variation:≤1DIV (Reference at center graticule)   TRIGGERING Triggering source: CH1,CH2,LINE,EXT Coupling: AC: 20Hz to full bandwidth SLOPE:+/- Sensitivity: 20Hz~2MHz:1DIV, TRIG-ALT:2DIV EXT:200mV；TRIG-ALT:3DIV,EXT:800mV; 2~30MHz:1.5DIV；30MHz~40MHz:2.5DIV；40MHz~50MHz:3DIV； TV: Sync pulse more than 1 DIV (EXT:1V) Triggering modes: AUTO; NORM: TV-V: TV-H: (Both TV-V and TV-H synchronize only when the synchronizing signal is negative) EXT triggering signal input: Input impedance/: Approx:1MΩ/approx.25pF; Max.input voltage:300V (DC+AC peak), AC: Frequency not higher than 1KHz

• Features: Fully sealed long live vertical mode switch, High luminance, internal graticule CRT
• Brand: GE
• Usage/Application: Measuring and testing of scientific equipment
• Model Number/Name: GE-2030