AC Sensors Dealers

This is an AC current measuring sensor featuring CT technology, CT stands for current transformer, a transformer unit split in two half like a clamp for measuring alternating current source.  Non-invasive AC Current Sensor can measure a load up to 10 Amps AC source, simply clamp the current sensor on the live wire or neutral wire. The sensor measure the amount of current flowing through the wire. The output is a small AC signal which can be further use for energy meter application or for over-current protection of AC devices. To facilitate the application need the sensor has 3.5mm jack on the output side. Popular application of Non-invasive current sensor are like safe working on the high voltage electrical lines, protection of over current of the electrical device like AC motor, Air compressor.   Input Current 0-10 Amp AC Core Material Ferrit External Material Plastic Opening Size 13 x 13mm Output Plug 3.5mm Dielectric  Strength 6000V AC/1min Working Temperature -25-70°C Cable Length:  1-1.5m

• Power: 1-12kw
• Application: Automotive Industry
• Country of Origin: India
• Temperature Range: -40..+85°C
• Alarm Range: 1-10 Mtr
• Pack Type: Box

We are offering car ac sensors. Accessories apart from the main line , we provide wide range of products that complete the auto air conditioning

• Feature: High Stability and reliability , Rugged construction ,Flame Resistant and Retardant ,Fast response,High measuring accuracy
• Resistance: 1-100 K ohm
• Operating Temperature Range: -40 to +85 Degreec
• Length: 100-1000 mm
• Storage Temperature: -40 to 85 Degreec
• Insulation Resistance: 100 M ohm
• Response Time (Max): 6 sec

Manufactured in confirmation to the established industrial standards of excellence, these AC and DC Magnetic Sensors are known for delivering the best performance. We are among the reputed sources for procuring these AC and DC Magnetic Sensors. Also, these AC and DC Magnetic Sensors can be purchased from us at reasonable rates. Highlights Easy to operate Easy to install Long-life Smooth performance

• Country of Origin: Made in India
• Usage/Application: Air Conditioner
• Resistance Of Thermopylae: 50 ohms
• Frequency: 10 Hz
• Operational Temperature: 20 to 60 Degree C
• Diameter: 6 mm
• Protection: IP55
• Censoring Distance: 50 mm

Cost effective solution for acceleration and velocity measurement. Can be interfaced with standard monitoring systems which can accept 100 mVg or 3.99mVmmsec sensitivity inputs. With working principle basd on peizoelectricity, the life of sensor and accuracy become the most important factor for the sensor selection. These sensors will help you save maintainance cost since less spares need to be maintained.

• Features: Reliable, Precise, Less maintenance, Quality assured, Fine finish

• 36MM DIA : AC 90 TO 250 V
• 250mA : F:15MM, NF : 20MM sensing distance.

We offer inductive type AC proximity sensor in 36mm dia.

These Sensors are designed to provide better alternative to conventional limit Switches / micro switches. These are epoxy potted similar to other types of sensors to render IP67 protection and hence are suitable even in underwater applications. The load (AC Contactor / AC relay / Solenoid Coil) is to be connected in series with the switch.

• Output: 0 - 2 Volts
• Material: Metal
• Weight: 60 Grams (g)
• Product Type: AC DC Current Sensor
• Usage: commercial

• Feature: High accuracy , Infinite resolution

The R30A RVDT (Rotary Variable Differential Transformer) is an angular position sensor that incorporates a proprietary non-contact design which dramatically improves long term reliability when compared to other traditional rotary devices such as synchros, resolvers and potentiometers. This unique design eliminates assemblies that degrade over time such as slip rings, rotor windings, contact brushes and wipers, without sacrificing accuracy.

Automatic urinal sensor (code no : Gpiuf07wjq) with photo electronic IR sensing system for male/female urinal flushing system. Filtered water flushing comprising of air inch minimum 20 orifices in the pipe line.

We offer superior quality AC Sensors in the market. The AC Sensors, we offer, have Epoxy coating. Tested and assured, we offer, our AC Sensors in different capacities. Our AC Sensors have gained us popularity as the best Manufacturer, Exporter and Supplier in Pune, Maharashtra, India. Highlights : Epoxy coated / over molded2K, 2.2K, 5K, 10K, 20KΩTolerance : 1%, 2% and 3%Testing at the rate of 0oCor 25oCAvailable as per customer requirements

We are a well-known Manufacturer, Exporter & Supplier of AC Current Sensor. The Hall Effect is an ideal sensing technology. The Hall element is constructed from a thin sheet of conductive material with output connections perpendicular to the direction of current flow. When subjected to a magnetic field, it responds with an output voltage proportional to the magnetic field strength. The voltage output is very small (µV) and requires additional electronics to achieve useful voltage levels. When the Hall element is combined with the associated electronics, it forms a Hall Effect sensor. The heart of every MICRO SWITCH Hall effect device is the integrated circuit chip that contains the Hall element and the signal conditioning electronics. The XYZ consists of a precise, low-temperature drift linear hall Sensor IC with temperature compensation circuit and a current transformer with 0.24 Ohm typical internal conductor resistance. This extremely low resistance can effectively reduce power loss, operating temperature and increase the reliability greatly. Applied current flowing through this conduction path generates a magnetic field which I s sensed by the integrated Hall IC and converted into a proportional voltage. Working Principle : Theory of the Hall Effect : When a current-carrying conductor is placed into a magnetic field, a voltage will be generated perpendicular to both the current and the field. This principle is known as the Hall Effect. Figure 2-1 illustrates the basic principle of the Hall Effect. It shows a thin sheet of semiconducting material (Hall element) through which a current is passed. The output connections are Perpendicular to the direction of current. When no magnetic field is present (Figure 2-1), current distribution is uniform and no potential difference is seen across the output. When a perpendicular magnetic field is present, as shown in Figure 2-2, a Lorentz force is exerted on the current. This force disturbs the current distribution, resulting in a potential difference (voltage) across the output. This voltage is the Hall voltage (VH). The interaction of the magnetic field and the current is shown in equation form as equation 2.1. Advantages : Very economical Can measure both DC and AC current Current sensing is easy Applications : Current sensing Power sensing Proximity detection Speed detection

A prominent supplier of huge range of Air Conditioner Sensor.

The AC voltage detector is used to indicate the presence or absence of line voltage. This is useful, for example to tell when the UPS is running on battery power.

Air Conditioner Sensor, Air Conditioner PCB, Air Conditioner DISPLAY

AC Current Sensors, vibration monitor, Dynamic Balancing Equipments

AC Current Sensors, Electrical High Voltage Sensors

Varuna AC SENSORS, electronic water level controller

M-18 AC NO Sensor, photo sensor, Insulated Lug, Barrier Terminal Block

AC Voltage Sensor, RFID Swing Handle Lock, security sensors

Ac Dc Sensors, data transmission, Fiber Optics

AC Sensor

AC DC Power Photo Sensors, Portable Signal Conditioner, t5 street lights

Pure AC Sensing

Cylindrical AC Diffused Scan Sensors, Belt Sway Switch