Adamite Rolls Dealers

Rolling Mill Rolls are required to cast the metal into thin sheets. We offer a range of Rolling Mill Rolls that are manufactured with high-grade metals or alloys using advanced technology. These Rolling Mill Rolls have hard structure and can withstand high heat as well. Some of the Rolling Mill Rolls, offered by us, are Adamite Roll, Alloy Steel Roll, Cold Rolling Mill Roll, etc. Attributes : Corrosion resistance Ruggedness Smooth finish Durable

• dull silver: grey

We are offering adamite roll. alloy steel base rolls (adamite) or cr-ni-mo alloyed. the high mechanized strength of typical steel & wear resistance property of cast iron are combined in these rolls by means of special heat treatment cycles.in these rolls the graphite is in the from of spheroids produced by suitable inoculation. Most nodular iron rolls are chill cast resulting with a hard working layer and softer nects. the alloy content is accurately controlled to give fine and well distributed graphite nodules and refined carbide in generally paralytic or benetic / martens tic matrix. the higher alloy content cr-ni-mo makes the rolls tougher & wear resistant.

We bring forth best quality Adamite Steel Rolls that are known for superior quality and high performance among the clients. Avail our Adamite Steel Rolls in varying diameters and lengths to meet the demands of various industries. Available in Diameter up to 1500 mmLength up to 11500 mm

We provide highly efficient Adamite Rolls in the market. Adamite is a material, mechanical properties and carbon content of which stands between steel and iron. Owing to its alloy elements such as NiCrMo etc. there are some amount of carbide in the matrix and because of certain special heat treatment technology, high wearability, good toughness and excellent resistance to fire crack are obtained. The advantage of Adamite Rolls is that almost no hardness gradient in the working layer is required.

These Rolls are special hyper-eutectoid steel rolls alloyed with Nickel, Chromium & Molybdenum. The extra Carbon and special alloys give extra wear resistance and strength. These rolls are statically cast and undergo a special high temperature heat treatment process of double annealing followed by tempering cycles to give a micro structure consisting of fine pearlitic matrix with spherodised / broken carbide.Application : These Rolls are suitable for rolling medium and heavy sections. These rolls are also used for roughing stands of strip mill.

Adamite Rolls are special hyper-eutectoid steel rolls alloyed with Nickel, Chromium & Molybdenum. The extra carbon and special alloys give it extra wear resistance and strength. These rolls are statically cast and undergo a special high temperature heat treatment process followed by tempering cycle to give a micro structure consisting of fine pearlitic martix with spherodised broken carbide. These rolls are suitable for rolling medium and heavy Sections where resistance is very important along with considerable amount of strength and toughness. These rolls are also used for roughing stand of Strip Mill.

We are offering adamite steel rolls. We specialize in all kinds of adamite rolls having diameter upto 1500 mm and length upto 10000 mm in all international standards. We provide high quality as per design and specification of customers requirements.

• Thickness: 10-20mm
• Certification: ISI Certified
• Application: Industrial Use
• Color: Silver
• Finishing: Polished
• Type: Adamite

Adamite Rolls are alloy steel rolls having hardness ranging from 40 degrees shore C to 55 degrees shore C with carbon percentage ranging from 1.35% to 2 %. Adamite rolls are casted with Cr-Ni-Mo alloys and after casting the Rolls annealing the Material. Adamite Rolls having highly demand in section mills.

Raw material that is sourced from the reliable places is used as input in the production procedure. In order to make high quality range of products, we check it for quality prior to sourcing. We have established a state-of-the-art warehouse facility and equipped it with the latest inventory control system. Thus, we can take care of seasonal supply, wholesale supply, and quick supply among others. Features: High grade metal Precision made Dimensionally stable

• Country of Origin: India
• Length: 1-1000mm
• Application: Industrial Use
• Feature: Color Coated, Corrosion Resistant, Fine Finish
• Finishing: Polished
• Certification: ISO 9001:2008

Size Limitation Maximum : 600 mm diameter Minimum  : 150 mm diameter   Lenth - Maximum : 1200 Minimum   : As per your requrment 

• Thickness: 10-20mm
• Length: 1-1000mm
• Application: Industrial Use
• Color: Silver
• Finishing: Polished
• Feature: Waterproof
• Material: Stainless Steel

The company is the foremost Manufacturer and Supplier of Adamite Steel Rolls. Adamite Steel Rolls are basically alloy steel rolls (a kind of high carbon steel) having hardness ranging from 40 degrees shore c to 55 degrees shore c with carbon percentage ranging from 1.35% to 2%. These Adamite Steel Rolls are primarily supplied for initial stands where wear resistance is important along with considerable strength and toughness. Adequate heat treatment is necessary to achieve requisite wear resistance along with strength and toughness. Adamite Steel Rolls contains carbides and therefore the wear resistance is obviously improved as compared with hypo-eutectoid and eutectoid steel. To obtain excellent comprehensive properties modification is conducted with special rare-earth or other powerful agent, then through a multi-stages heat-treatment process, that consists of briquette carbides dispersed in the matrix of palletized pearlites can be gained, which perform well on strength, toughness and hot crack resistance. Apart from that a vast range of S.G Iron rolls is also available in a range of: 50, 60, 65, 70, 75 and 80 shore D. These Adamite Steel Rolls offer higher durability.

These rolls are statically casted and undergo a special high temperature heat treatment process. Bentex have been able to offer optimum quality Adamite Rolls to our valuable customers. These rolls are suitable for rolling medium and heavy sections where resistance is very important along with considerable amount of strength & toughness. The offered rolls are available with us in customer stated specifications. Details: Extra carbon and special alloy give it extra wear resistance & Strength. Size: As per Requirement of Steel Rolling Mill Ultrasound Tested to check any structural defect.

These rolls are self-possessed mainly of pearlite with some cementite in the structure. adamite rolls are strolled than cast iron rolls and harder than other steel rolls. an outstanding feature of adamite rolls in that the inner hardness is about the same as that of the surface. adamite steel rolls are classified as ordinary. these rolls are used in pre-finishing to polishing stands in structure mills where wear resistance is very important along with considerable amount of strength and toughness.

• Size limitation: 600 mm diameter, 150 mm diameter
• Tensile Strength (N/mm2): 500-700

Adamite Steel Rolls are mainly composed of fine pearlitic matrix with some cementite in the structure. The structure consists of well broken up and dispersed carbides in a pearlitic matrix complementing the hardness and wear resistance imparted by highly alloyed matrix. They typically have great strength, good thermal properties and high wear resistance. Unlike other Metal Rolls, these have uniform hardness from depth to the surface which makes them very special. Hardness of these Rolls is maximum amongst the steel based Rolls. These Rolls are statically cast and go through multi stage heat treatment process (Annealing) followed by Tempering phases in order to develop the combination of hardness, toughness and wear resistance required for heavy duty wear applications. Applications of Adamite Rolls include : Section finishing, wire rod intermediate rolling. Roughing stands of strip mills. Medium and small blooming rolling. Wire rod and bar steel roughing. Size limitation : Maximum : 600 mm diameter Minimum : 150 mm diameter

Adamite Rolls are widely used for hot rolling applications in different type of preroughing and roughing group stands and also different positions in section mills as well.The material consists of carbides in pearlitic matrix and range in carbon contents between 1.0 and 2.2%. Depending on the primary requirements there are variety of grades with a series of carbon content and alloying elements used considering the rolling mill operational conditions such as wear, strength, thermal cracks etc... Steel base rolls are heat treated in various ways ways and have no hardness drop. Adamite Rolls Manufacturers in India.

• Roll Diameter: 24 inches or 610 mm Max
• Roll Length: 48 inches or 1220 mm Max

Adamite Rolls are basically alloy steel rolls (a kind of high carbon steel) having hardness ranging from 40 degrees shore c to 55 degrees shore c with carbon percentage ranging from 1.35% to 2%. these rolls are primarily supplied for initial stands, where wear resistance is important along with considerable strength and toughness, adequate heat treatment is very much necessary to achieve requisite wear resistance along with strength and toughness, the roll contains carbides, and therefore the wear resistance is obviously improved comparing with hypo-eutectoid and eutectoid steel, to obtain excellent comprehensive properties modification is conducted with special rare-earth or other powerful agent, then through a multi-stages heat-treatment process, that consists of briquette carbides dispersed in the matrix of palletized pearlites can be gained, which perform well on strength, toughness and hot crack resistance.