Adamite Steel Rolls Dealers

We bring forth best quality Adamite Steel Rolls that are known for superior quality and high performance among the clients. Avail our Adamite Steel Rolls in varying diameters and lengths to meet the demands of various industries. Available in Diameter up to 1500 mmLength up to 11500 mm

We are offering adamite steel rolls. We specialize in all kinds of adamite rolls having diameter upto 1500 mm and length upto 10000 mm in all international standards. We provide high quality as per design and specification of customers requirements.

These Rolls are special hyper-eutectoid steel rolls alloyed with Nickel, Chromium & Molybdenum. The extra Carbon and special alloys give extra wear resistance and strength. These rolls are statically cast and undergo a special high temperature heat treatment process of double annealing followed by tempering cycles to give a micro structure consisting of fine pearlitic matrix with spherodised / broken carbide.Application : These Rolls are suitable for rolling medium and heavy sections. These rolls are also used for roughing stands of strip mill.

• Thickness: 10-20mm
• Length: 1-1000mm
• Application: Industrial Use
• Color: Silver
• Finishing: Polished
• Feature: Waterproof
• Material: Stainless Steel

Adamite Rolls are special hyper-eutectoid steel rolls alloyed with Nickel, Chromium & Molybdenum. The extra carbon and special alloys give it extra wear resistance and strength. These rolls are statically cast and undergo a special high temperature heat treatment process followed by tempering cycle to give a micro structure consisting of fine pearlitic martix with spherodised broken carbide. These rolls are suitable for rolling medium and heavy Sections where resistance is very important along with considerable amount of strength and toughness. These rolls are also used for roughing stand of Strip Mill.

The company is the foremost Manufacturer and Supplier of Adamite Steel Rolls. Adamite Steel Rolls are basically alloy steel rolls (a kind of high carbon steel) having hardness ranging from 40 degrees shore c to 55 degrees shore c with carbon percentage ranging from 1.35% to 2%. These Adamite Steel Rolls are primarily supplied for initial stands where wear resistance is important along with considerable strength and toughness. Adequate heat treatment is necessary to achieve requisite wear resistance along with strength and toughness. Adamite Steel Rolls contains carbides and therefore the wear resistance is obviously improved as compared with hypo-eutectoid and eutectoid steel. To obtain excellent comprehensive properties modification is conducted with special rare-earth or other powerful agent, then through a multi-stages heat-treatment process, that consists of briquette carbides dispersed in the matrix of palletized pearlites can be gained, which perform well on strength, toughness and hot crack resistance. Apart from that a vast range of S.G Iron rolls is also available in a range of: 50, 60, 65, 70, 75 and 80 shore D. These Adamite Steel Rolls offer higher durability.

• Country of Origin: India
• Length: 1-1000mm
• Application: Industrial Use
• Feature: Color Coated, Corrosion Resistant, Fine Finish
• Finishing: Polished
• Certification: ISO 9001:2008

Size Limitation Maximum : 600 mm diameter Minimum  : 150 mm diameter   Lenth - Maximum : 1200 Minimum   : As per your requrment 

Adamite Steel Rolls are mainly composed of fine pearlitic matrix with some cementite in the structure. The structure consists of well broken up and dispersed carbides in a pearlitic matrix complementing the hardness and wear resistance imparted They typically have great strength, good thermal properties and high wear resistance. Unlike other Metal Rolls, these have uniform hardness from depth to the surface which makes them very special. Hardness of these Rolls is maximum amongst the steel based Rolls. These Rolls are statically cast and go through multi stage heat treatment process (Annealing) followed by Tempering phases in order to develop the combination of hardness, toughness and wear resistance required for heavy duty wear applications.by highly alloyed matrix.

To give the best quality products we have setup faclities for Normalizing, Annealing & Heat treatment and are also fully equipped with all testing facilities of Physical, Chemical & Ultrasonic testing. Each of the product undergoes ridged testing and inspction at various stages from Raw Meterial to Finished products. We can forge a single piece fo 50 Kg to 6 Tonnes & in length upto 8 mtrs ( 10 mtrs. on special request.)

• Weight Range: 500 Kgs to 70,000 Kgs

Our Ferrous Steel Foundry is designed to cast around 1000 MT of high quality liquid metal from ladle refining furnace into Heavy Engineering Casting, Alloy Steel Rolls & S.G Iron Rolls confirming to Indian and International Standards. It is equipped with all auxiliary and testing equipments, producing very high quality castings with weight 70 Metric Ton single piece casting. Foundry has following facilities that are supported by fully equipped quality control center and highly experienced manpower.

These rolls are self-possessed mainly of pearlite with some cementite in the structure. adamite rolls are strolled than cast iron rolls and harder than other steel rolls. an outstanding feature of adamite rolls in that the inner hardness is about the same as that of the surface. adamite steel rolls are classified as ordinary. these rolls are used in pre-finishing to polishing stands in structure mills where wear resistance is very important along with considerable amount of strength and toughness.

Adamite Rolls are widely used for hot rolling applications in different type of preroughing and roughing group stands and also different positions in section mills as well.The material consists of carbides in pearlitic matrix and range in carbon contents between 1.0 and 2.2%. Depending on the primary requirements there are variety of grades with a series of carbon content and alloying elements used considering the rolling mill operational conditions such as wear, strength, thermal cracks etc... Steel base rolls are heat treated in various ways ways and have no hardness drop. Adamite Rolls Manufacturers in India.

We are one of the most experienced and technically sound in understanding the requirement of rolls for diffrent rolling mills, we can suggest, manufacture and supply Quality rolls as per requirements for todays modren rolling mills and meet Stringent demands in quality and stability.High Quality liquid metal with Precise chemical composition (Treated with Argon gas) and different heat treatment cycles ensures the manufacture of quality rolls.

These Rolls are special hyper-eutectoid steel rolls alloyed with Nickel, Chromium & Molybdenum. The extra Carbon and special alloys give extra wear resistance and strength. These rolls are statically cast and undergo a special high temperature heat treatment process of double annealing followed by tempering cycles to give a micro structure consisting of fine pearlitic matrix with spherodised broken carbide. These Rolls are suitable for rolling medium and heavy sections. These rolls are also used for roughing stands of strip mill.

We provide high quality adamite steel rolls. We specialize in all kinds of adamite rolls having Diameter upto 1500 mm and length upto 10000 mm in all international standards.

adamite steel rolls are chiefly applied for the mills where the strength or biting quality is taken into further consideration than wear resistance. A wide range of Alloy cast Steel Rolls have been developed to meet individual applications, depending on their carbon content and heat treatment.

• Size: 0.65 MAX

These rolls are special hyper-eutectoid steel rolls alloyed with Nickel, Chromium & Molybdenum. The extra carbon and special alloys give it extra wear resistance and strength. These rolls are statically cast and undergo a special high temperature heat treatment process followed by tempering cycle to give a micro structure consisting of fine pearlitic martix with spherodised broken carbide. These rolls are suitable for rolling medium and heavy Sections where resistance is very important along with considerable amount of strength and toughness. These rolls are also used for roughing stand of Strip Mill.

Adamite Rolls are basically alloy steel rolls (a kind of high carbon steel) having hardness ranging from 40 degrees shore c to 55 degrees shore c with carbon percentage ranging from 1.35% to 2%. these rolls are primarily supplied for initial stands, where wear resistance is important along with considerable strength and toughness, adequate heat treatment is very much necessary to achieve requisite wear resistance along with strength and toughness, the roll contains carbides, and therefore the wear resistance is obviously improved comparing with hypo-eutectoid and eutectoid steel, to obtain excellent comprehensive properties modification is conducted with special rare-earth or other powerful agent, then through a multi-stages heat-treatment process, that consists of briquette carbides dispersed in the matrix of palletized pearlites can be gained, which perform well on strength, toughness and hot crack resistance. Full range of rolls and rings are available for structure mills,Adamite barrels are also available.

These Rolls are alloyed with NickeL, Chromium, Mar:lganese and Molybdenum with Carbon content between 0.50% and 2.00% as well as little amount of Vanadium is also added for the improvement of better microstructure. So these are capable of a higher mechanical strength with thermal and wear resistance. These Rolls undergo a sophisticated multi-stage high temperature Heat - Treatment (Double Annealing followed by tempering cycle) to give the combination of hardness, toughness and wear resistance required for the particular application. The lower Carbon grades will have a structure consisting offerrite arid fine Pearlite which, as the Carbon content is raised, transitions to a fully Pearlitic structure and on to one containing free carbide in a matrix of fine Pearlite and even some Bainite for the highest Carbon grades. All rolls of this material are statically tangentially single poured.