Adhesive Coating Machine Dealers

• SPEED: Variable From 1 to 20 MPM
• WIDTH OF MACHINE: From 500 Mm To 2000 MM.
• LENGTH: Custom Built As Per Products & Line Speed Required.
• COAT WEIGHT: Min. 15 Gsm Upto 500 Gsm Dry.
• HEATING: Indirect Through Hot Air Generator Diesel Or Gas Fired.

APPLICATIONS Suitable for Adhesive Coating on All Foams & Fabrics. FEATURES Special Flat Feed design for Foam All Kind of foams like. Rubber, NBR, Polyolefin, XLPE, PE, PU, Bonded PU, Digital Coma Coating Station. Preset Gap Setting Very High Accuracy. Least Count 1 Micron. Reverse Roll & Reverse Kiss Coating for various fabrics. AluGlass, FSK, Glass Cloth. Digital Gap Setting at Lamination for precision in Adhesive Transfer to Foam. Also Available with Online Side Trim station & Online Length Cutting Station. AUTO MODEL Available Fully Programmable Model with Recipe Setting For Different Products. All Parameters Like Tension, Temperatures, GSM, Lamination Gaps at Various Stations, Side trim Width, Cutting Length are preset. All reports generated online. Machine will have online support through Internet.

Hot melt rubber coated cloth machine and other of hot melt rubber machine of work principle is similar of, so said are has a heater, in heating of process in the, because hot of conduction sex different, in using of process in the, thermometer Shang displayed of rubber temperature may and actual has must of errors, in using of process in the, we cannot according to one-time of interpretation temperature, best in must of time interval within, times of temperature, such words, measuring of temperature will is more accurate of, can will we of called temperature side of more associate, Use will also be more convenient.

• Brand Name: RS Technology
• Material: Polypropylene
• Frequency: 50 HZ
• Voltage: 415 V AC
• Driven Type: Gear Driven
• Phase: 3 Phase
• Warranty: 1 Year
• Brand Name: RS Technology
• Usage/application: Coating Gum
• Power Consumption: 50 HP
• Production Capacity: 40 mpm
• Model Name/Number: RSTBOPCOT60
• Automation Grade: Semi-automatic
• Dimension: 32 Foot X 8 Foot X10 Foot
• Weight: 3 Ton
• Control Panel: Semi-automtic
• Speed: 40 MPM

• Workable Coating Range: 200 (300) mm
• Machine Size: 515 * 355 * 430 mm

The machine is suitable for plane gluing which thickness over than 1.5mm, such as footwear, leather case, leather wear, stationery, cardboard box, sporting goods etc. 2. Innovated design of upper roller base can floating up & down and with pressure adjusting for material gluing which surface with uneven, soften, hard and slope status. 3. The hot melt adhesive stand with teflon treated for change adhesive easily. It can be adjusted temperature according to the feature of hot melt adhesive so that, to avoid the hot malt adhesive carbonized defectively. 4. The machine equipped with thermostat device to avoid motor trouble, moreover, it equipped with a exhaust fan to blow out the odor gas. 4. The driving motor is controlled by inverter, so that, the PPM can be variable adjusted.

• Type: Automatic
• Certification: CE Certified
• Weight: 100-1000kg
• Voltage: 440V
• Driven Type: Electric
• Warranty: 1 Year
• Power: 3-6kw
• After-Sales Service Provided: Spare Parts

Product Applications : BOPP tapes Single side coated fabric / tissue tapes Masking tape Protection tape Coating Systems : Reverse Roll and Mayer Bar Roll over Roll Knife Technical Specifications : Web width : 800 to 1300 mm (optional) Core ID : 76/150 mm Production Speed on : 10 to 100 meters / min depending coating weight and type of coating Drying System : Hot air Heat Source : Thermic Oil/Hot Air / Stream Adhesives : Water base / Solvent base Web support : Idler / driven rolls Machine Features : Single / Double station Unwind Mechanical / Pneumatic Brake at unwind Manual / Pneumatic loading of parent roll Multi - step temperature control for different zones Single station / Double station Turret Rewind Friction clutch / Auto - tension control for Rewind Lamination station Web guide system

FUMA offering the world class technology Adhesive Coating and Lamination machine. The Machine is easy to Operate, easy to install and more energy saver. It takes care of Large Quality of Lamination work in a non-messy & organized manner. SALIENT FEATURES: • Gravure type coating system for Rubber Roll, Doctor blade & Nip Roller. • Fully insulated glass wool sheet fitted in the panel (Top side & Bottom) for controlling heat loss. • For controlling heat loss • Slit type fix chamber air flow arrangement, against roller. • Exhausts are distributed through-out the length of drying chamber. • Digital temperature controller with indicator & PT 100 sensor for each Zone. • Inside heating for Nip Steel roller. • Shaft types fix Rewinder with motor. • CT. SRA Web system for controlling the Web after the drying tunnel.

• Brand Name: BSM
• Driven Type: Pneumatic
• Condition: new
• Weight: 10kg
• Glue Bottle Capacity: 2L
• Application Type: Injection
• Glue Types: PU Glue, Rubber-Based Glue, Water-Based Glue
• Glue Width: 66MM
• Speed: 1-15 m/min
• Applications: Packaging, Stationery, Electronics, Clothing, Woodworking, Shoe Industry, Luggage Accessories Box

• Coating Width: 400-2000mm
• Coating Amount: 20-200g/M2
• Coating Speed: 50m/Min
• Roll Diameter: 1000mm
• Roll Diameter: 700mm
• Deviation Correction Device: 2set
• Length: 5000mm
• Height: 1400mm

Main Feature of HOT MELT ADHESIVE TAPE COATING MACHINE : The Host Speed And Glue Speed Can Be Adjusted Manually Or Automatically Track. Using Intelligent Pid Temperature Control System, The Error Is Within 1 Degree. All The Active Rollers And Passive Rollers Are Calibrated With High-Precision Balancing Equipment, Supplemented By Reasonable Installation Techniques. The Whole Machine Runs Smoothly With Low Noise, And The Composite Material Does Not Wrinkle. The Effect Is Good. High-Precision Alloy Die And High-Precision Metering Gear Pump To Ensure High-Quality Coating Effect. Replace The Fiber Spray System, Can Achieve Pe Film And Non-Woven Composite. The Special Filter Material Is Compounded, The Shoe Material And Clothing Material Are Compounded, The Medical Material Is Compounded, The Special Material Is Compounded, And The Fiber Spray Is Comparatively Uniform And Exquisite And Has Breathability. The Device Can Be Equipped With A Dedicated Pur Hot Melt Machine, Enabling The Device To Be Used For The Compounding Of High-Grade Materials.

• Voltage: 220-440V
• Condition: New
• Material: Mild Steel
• Brand Name: Hero
• Automation Grade: Manual, Automatic, Semi-Automatic
• Power Source: Electric
• Frequency: 50-60 Hz
• Width: 500MM - 1650MM

Model : NISSI BOPP TAPE COAT Multi Drive System Web guide System Turret with Auto Splicing  Web Width : 500 to 1400 mm Many more features present....

• Material: Mild Steel
• Capacity: 40 Tons/month
• Brand Name: Sanmach
• Features: High operational fluency, Optimum performance, Long service life
• Material To Be Coated: BOPP
• Automation Grade: Automatic
• Power : 20 kW
• Speed: 40 m/min
• Laminating Width: 500mm-2000mm

• Brand Name: HAPPY
• Packaging Details: EXPORT PACKING
• Supply Ability: 1 Unit/Units per Month
• Port: BOMBAY
• Model Number: HMW-ATCM
• Design Printing: Offer Printing
• Place of Origin: Delhi, India

Having years of industrial experience, we are having thorough knowledge on specific requirements of coating industry; we have emerged as an established manufacturer and supplier of Cello Tape Coating Machine. The offered Cello Tape Coating Machine is used for coating aluminum foil, kraft paper and for BOPP film. Our offered automatic machine consists of electronic temperature controller with uniform heat distribution capacity, auto counter system, speed controller, dryer, unwinding section and gravure printing system. The special features of these machines are its electromagnetic induction heating technique, low energy consumption, well built structure, good insulation properties, high production rate, high coating speed and low maintenance cost. Our customers can avail these machines in various sizes, shapes and specification to meet the clients. As this machine consumes very less power, it is highly demanded in the market. Before the final dispatch of the machines, it is properly tested for quality at various parameters by our qualified and experienced experts. We are offering this Cello Tape Coating Machine at highly competitive price. The most commonly used are hot melt synthetic rubber and acrylic. Hot melt adhesives are one of the most widely used because of the consistent, reliable and quick seals. This kind of adhesive quickly bonds to the surface and offers high tensile strength, which make it one of the best choices for securing shipment. It could adhere well to various surfaces including film and fiberboard.

• Type: Adhesive Tape Coating Machine
• Color: Black, Brown, Grey
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Driven Type: Electric, Hydraulic, Penaumatic
• Warranty: 1year, 2years
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Weight: 100-1000kg, 1000-2000kg, 2000-3000kg, 3000-4000kg, 4000-5000kg
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic

We manufacture Hot Melt Lamination Machine from best metal and alloy and this Laminating Machine is used for hot melt adhesive coating on various films. Features of Hot Melt Lamination Machine manufactured by Webflex Machines: Designed Hot Melt Coater & laminator of specially hot melt adhesives on flexible subtracts films. This Laminating Machine is compact, sturdy, has modular construction with integrated unwind & rewind units, coating lamination, controls etc. grouped for ease of operation. Unwind units are equipped with mechanical features for EPC & tension.

• Unwind Roll Diameter: 600 / 800/1000 approx mm
• Rewind Roll Diameter: 600 / 800 /1000 approx mm

With the assistance of a team of competent workers, we are offering a wide range of qualityCoating Machine for Self Adhesive Tape. This rotogravure printing machine is perfectly manufactured by using brilliant quality components and modern technology. We defined the quality of our products after checking it properly so that our range performs better while using. Along with that, our honored patrons can buy the entire range of rotogravure printing machines as they want at affordable rates.

Coating weight application ranges from: 0.02 to 1500 gsm Processing speed: 2 mts.min. to 900 mts.min Processable hotmelt adhesives application width ranges from 0.3 mm to 6000 mm Wide range of Viscosity from 100 to 120,000 mPass Possible coating : Full coating, breathable (open) coating structure, multi-line coating or intermittent coating

• dia: 300 mm
• Machine Speed: 150 / 200 M/ min

The above 2 rollers shall be made out of steel pipes having sufficient wall thickness.A sliding arrangement with a coating tray & width adjusting stopper , with 3 Nos. Aluminium rollers . All the above assemblies shall be mounted on the proper frame structure along with the base.