Single Agitator Seal
Get Price Quote
1 Piece (MOQ)
SSI-107B factory assembled single Agitator Seal with bearing arrangement which are duly hydro tested at required pressure. These seals are used in glass lined steel and stainless steel mixers, agitators & reactors. These are used with non pressurized barrier fluid preferably clean water or oil. These seals can be supplied with cooling water jacket to ensure healthy environmental control near the seal area. Face Materials : Silicon Carbide Carbon Ceramic Chrome Oxide Coating Metal Parts : SS 316, SS 304 Hastelloy-C, Alloy 20, Monel Applications Petro Chemicals & It’s vapours General Chemicals & It’s vapours Light Hydro Carbons & It’s vapours
Agitator Seals
Get Price Quote
Seal Type 510/D and 510/D/B Mechanical Seals are designed for Top, Side and Bottom Entry Drives in Agitators and Reactors. Compact Economical Cartridge Double Mechanical Seal for Agitators and Reactors. Seal Type 510/D/B Design Incorporate with location of Bearings very close to the Seal. These Seal specially designed for any mixed and pressurized liquid in Vessel with Top Entry Agitators where no leakage in Process Gas OR Fluids to the Environment can be tolerated. Complete Pre-assembled Tested Unit ready for installation. These Seal are used for Exclusive Solid Seal Faces, Stationary Seats, thus Lowest Level of Seal Face distortion when Expose to Compressive Load and Thermal Pressure.
Best Deals from Agitator Seal
Agitator Mechanical Seal
31,500 - 65,000 Per Piece
Agitator Mechanical Seal
40,000 Per Piece
10 Piece(s) (MOQ)
R200S Agitator Mechanical Seal
15,000 - 80,000 Per Unit
1 Unit (MOQ)
R200S Agitator seals as single seals With Bearing / Without Bearing Etannor is a well-known and established partner in the designing and manufacturing of mechanical mixer seals. We offer mixer and agitator seals as single seals and as double mechanical seals. Each type is equipped with a number of barrier fluid, flush and grease connections. To increase the life and runtime of the seals, we offer wide range of seal support systems. All steel components are made out of stainless steel SS316 for the best achievable chemical resistance. Other materials are available upon request.
Reactor Seal
50,000 - 500,000 Per Piece
1 Piece (MOQ)
Agitator Seals
10,000 - 22,000 Per piece
5 Piece (MOQ)
AGITATOR SEAL Lineproof Engineering is a leading manufacturer and exporter of best quality Agitator Seals. This seal is precisely manufactured with high precision by utilizing paramount quality raw materials and contemporary techniques in tune with the international quality standards. The offered seal finds application in agitator for providing air tight sealing. Furthermore, our patrons can purchase this seal in varied sizes, at highly competitive prices from us. Industrial Application: Chemical, Pharmaceuticals, Drugs & Polymer Industries. Face Materials: Tungsten Carbide, Carbon, Silicon Carbide, Ceramic. Metal Component: S.S 304, S.S 316, Alloy 20, Hastelloy C. Secondary Seal: Viton, EPDM, Silicon, Grafoil, PTFE, FFKM. Operating Limits: Pressure : 40 bar Temperature : -40˚C to 200˚C Speed : Subject to specification.
Agitator Seals
Get Price Quote
100 Piece (MOQ)
0.0
Website
DOUBLE AGITATOR MECHANICAL SEAL
5,000 - 100,000 Per Piece
1 Piece (MOQ)
Agitator Cartridge Seal
Get Price Quote
100 Piece (MOQ)
Details : These Cartridge Seaf units are designed for Mixer, Agitators and Glass Lines Recotors. The Heavy duty construction of the 50 seriesprovides long seal life and excellent repairability. The design incorporates bearing located very close to seal. The design specifically is engineered to accommodate the run-out conditions, up to 0.5mm. Large clearance between ration shaft/ sleeve and mating ring permits higher deflection of the shaft. For Higher temperature application, the seal asembly has got jacketed chamber to circulate chilled water to bring down the temperature. Also normally chilled/ Plain water is passed through the cooling coll of Thermosyphon to bring down the temperature of compatible barrier fluid circulated in seal housing to maintain the continuous cooling. Bottom portion of seal housing is also designed with heat trapping jacketed cooling to reduced the temperature around the bottom seal face. MOC. Ss316, Ss3.4, ALLOY-20, Monal
Reactor Seals
Get Price Quote
We share glorious credentials with the famous Manufacturers, Exporters & Suppliers of Reactor Seals from Uttar Pradesh. The Seals we make available are manufactured using advanced technology in compliance with set industrial norms. Strict quality-tests ensure that only defect-free Seals reach the buyers. Bulk orders of these are processed by us as per the specific requirements of the buyers. One can obtain the Reactor Seals at nominal rates from us. Description : Type HS-22RB Series Seals are multiple spring type dry running seals. These seals are available in balanced configuration, the rotary unit of these seals are comprises of three pieces, Compression ring, Multiple springs and Seal ring. These seals are externally mounted and springs used for reactor where dry running conditions are required and also not effected by direction of shaft rotation.Specifications : Shaft Diameter - 1" to 12.0" Pressure Balanced - 16 bar Speed - 200 rpm - 300 rpm Temperature - -200C to + 1600C Face Combination - Carbon, Ceramic (99.5%), Silicon carbide, Tungsten carbide, Stellite etc.
Agitator Mixer Vessel Seals
58,400 Per Piece
1 Piece (MOQ)
Agitator Dry Running Mechanical Seals
65,000 Per Piece
10 Piece (MOQ)
Are you looking for agitator dry-running mechanical seals? J I Mech Seal and Engineering is a reliable manufacturer and supplier of these products. Agitator Dry Running Mixer Seal Simple and rugged drive design that can withstand shaft movement, vibration & deflection. This Seal design eliminates the need for auxiliary equipment for cooling & lubrication that is required for mixer application. Since there is no use of barrier fluid, thus eliminates the possibility of product contamination and can be used in high vacuum applications. These seals are used on top entry agitators for food and pharmaceutical industries where contamination of the media with any other liquid inside the agitator is not permissible. These seals do not require any external lubrication to the seal faces, hence these seals are known as dry-running seals. Choose to deal with us and get our products today.
Reactor Double Mechanical Seal
35,000 - 200,000 Per piece
10 Piece (MOQ)
High Pressure Double Balanced Mechanical Seal For Hydrogenator. This seal is Excellent with low r.p.m Opration in Vaccum And High Pressure Conditions.
ME-410 Reactor Seal
25,000 - 150,000 Per Piece
1 Piece (MOQ)
Agitator Double Mechanical Seal
800 Per Piece
50 Piece (MOQ)
0.0
Website
Agitator Mechanical Seals
4,000 Per Piece
1 Piece(s) (MOQ)
Series Meqe800 Are Preset Factory Assembled Cartridge Seals For Use In Agitators , Mixers And Reactor Vessels. The Seals Construction Very Slightly For Top Entry Vessels, Side Entry Vessels And Bottom Entry Vessels. The Seal Are Designed To The Shortest Shaft Length And The Bearings Are Located As Close To The Vessel Body To Minimize The Deflection. Seal Characteristics Single Seal Double Seal Unbalanced / Balanced Independent On Direction Of Rotation Applications General Chemicals And Its Vapors Petrochemicals And Its Vapors Light Hydrocarbons And Its Vapors
Agitator Seal (LIE/708)
Get Price Quote
Agitator Seal (LIE/708): Agitator seals are low speed and successfully used for agitators , mixers , vessels , top and bottom mounted etc. these seals are specially used to prevent leakages of vapor and high pressure from tanks , for applications involving viscous or dry sticky media. It is mainly use for paints, mixers, driers, pharmaceuticals, pulp, paper, food processing etc. for critical application of high temperature and pressure , thermosyphon is recommended for trouble free operation.
Stainless Steel Double Reactor Seal
11,300 Per Piece
5 Piece (MOQ)
Agitator Mechanical Seal
350 - 500 Per Set
1 Set (MOQ)
0.0
Website
Cities
Post Free Ad