Air Chucks Dealers

• Size: 3", 6", up to 12"

It is a simple bellow type chuck mounted on an aluminum body for holding up the reel. It is used with a side clamp or a set screw on the base shaft.

• Material (Body): Aluminum Alloy
• Material (Bladder): Rubber Polymer

It is a simple bellow type chuck mounted on an aluminum body for holding up the reel. It is used with a side clamp or a set screw on the base shaft. Economical & light weight solution for core holding, Widely used for low torque unwind operation, Absolutely no damage to core, Easy mounting on shaft.

Air chuck are made out of high quality Abrasion resistant and resilient polymeric material. Our Chucks are joint less at gripping surface.

Air Chuck and Quick Locks are also core gripping devices. These are mounted on ‘Dead Bars’ Multiple air chuck can be linked pneumatically together on dead shaft. The ‘Dead Bars’ are manufactued with ends of journals machined to the required specification on which it is to be used.

We Resource Engimech (India) Pvt Ltd It is a simple bawl type chuck mounted on an aluminum body for holding up the reel. Our Company is located in Gujarat. It is used with a side grip or a set screw on the base shaft. The fluid film of the bearing is air that flows through the chuck itself to the be.. Send Enquiry

We are offering air chucks.

• Finishing: Polished
• Length: 1 Meter And Also Available Upto 4 Meter
• Diameter: 6 Inch
• Features: Sturdy design , Highly durable , Flawless finish
• Thickness: 10 Mm
• Available sizes: 3 Inch To 6 Inch

Specifications Sliding & Tilting Type wall & Base Mounting Customized Features To Safety Handle Shaft Heavy Duty Casting Body Maintenance Free Universal Design Asy Removable Heads Replaceable Incerts

• Type: Rubber Diaphragm / Lugs
• Warranty: 12 months any manufacturing defects
• Body: Aluminium
• Available Sizes: 152mm, 202mm
• Load Capacity: Upto 500 kg
• Air Valve: M-10, 1/8″ (NRV) etc.
• Air Pressure: 0 to 6 Bar
• Bush: Stainless steel
• Clamping: Aluminium
• Advantages: Low maintenance, excellent core grip in any load, no core damage, economically designed & user friendly, quick changeover, easy to use, light & heavy constructions
• Delivery Time: Ten Days

• Feature: Excellent Gripping
• Material: ALUMINUM material
• Size: 6" / 150mm
• Brand: TECHNO

• Material: Mild Steel
• Country of Origin: Made in India
• Thickness: 10 mm
• Pressure: 200 psi
• Hardness: 60 HRC
• Technique: Hot Rolled

Core chucks are available in sizes 4", 5", 6", as part of the standard manufacturing program. The 3" is only available as a mechanical chuck since in most cases a 3" dia airshaft is better and more economical. Chuck, for 6" cores, is the most popular chuck in our manufacturing program. It was designed with the help of some of our customers, safety being the main factor. Has an internal bladder protected by aluminum leaves, which protect the air bladder from being cut, and also limit the expansion of the chuck so it won’t "blow-out" if inflated outside of a core. The gripping element is a tough rubber compound that will grip all types of cores. It is easily and economically replaced when worn. The LR6 chuck is available with adapters for many bore sizes, and is usually stocked in 2.950" bore for standard AIR SHAFTS. It is available with a double split collar clamp, a single split clamp, and a set screw lock. "Tie Tube” option is available when multiple chucks are used in a single core. This allows numerous chucks to be inflated and deflated from the end chucks. Normally chuck bores are supplied to a tolerance of plus .010" of the shaft size. This is in order for the chuck to run as true as possible and still be easily slid on or off a shaft. Closer tolerances are available when required. Adaptors are available for square shafts and small diameter shafts. When ordering chucks for air shafts it is recommended that the shaft be checked for size, since shafts can be supplied with non common diameters. NOTE: Air Chucks are the same as Air Shafts. They must be inflated to the correct air pressure to perform properly, use with low air pressure will cause the roll to slip and wear out the chuck. The recommended air pressure in the chuck is 85-90 psi or approx. 6 Bar. Use with lower pressure will void the waranty.

Schrader air chucks perfectly fit the world standard Schrader valve design. All practical operating conditions during the life of the chuck and the tyre valve have been taken into consideration in establishing the principle of design.The seating of the chuck washer on the valve mouth, and the engaging of the valve core plunger pin by the chuck deflator pin, provide an air-tight connection with high speed air flow.

Air chucks are meant for 6” inside diameter cores. Two Air chucks holds the Roll firmly. Individual air filling valve can be provided for each air expanding chucks.

• Warranty: 12 months any manufacturing defects
• Material: Aluminum
• Brand Name: Anar
• Color: Silver ,Golden
• Packaging Type: Standard
• Available Sizes: 152 mm, 202 mm
• Capacity: Upto 500 kg
• Air Pressure: 0 to 6 Bar
• Features: Advantages Lowest Maintenance, No core damage, Easy to use.
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer).
• Diameter: 6"
• Length: Customize

Material : BS 2874 - CZ 121 Pb3 CZ 122 UNS C36000 CDA 360 DZR Brass BS 2874 - CZ 131 CW 614 N EN 12164 BS 2874 - CZ 114 BS 2874 - CZ 115

• Material: Brass
• Color: Golden
• Item Code: NDB-L4
• Size/Dimension: 8mm 
• Brand: J.J.

• Material: SS
• Brand Name: Ranger Stork
• Color: Silver
• Packaging Type: Box
• Features: Easy to install , Corrosion resistance , Accurate dimensions.
• Item Code: A0071121-A007C255b
• Diameter: 3-5 mm
• Finish: Polish

We hold expertise in manufacturing a range of Air chucks, that are meant for 6" inside diameter cores. Two air operated chucks hold the roll firmly and individual air filling valve can be provided for each air expanding chucks. Fabricated using best grade raw material, these are tested as per the set industrial standards. Our range of can be obtained at affordable prices. These are machined from solid brass. They are very useful devices for many industrial based applications. These are extremely easy to use and fully controllable. All industry specific standards have been well looked after in these products.

• Material: Aluminum
• Length: 200 Mm,300 Mm
• Country of Origin: Made in India
• Packaging Type: Box
• Brand Name: Bhoomi
• Capacity: 500 kg
• Diameter: 152 mm,402 mm

differential air shafts, quick locks, Multi Tube Shaft, Air Shafts

Brass Air Chuck, Brass Glass Fittings, Brass Gas Parts

air chucks, twin tyre connector, valve repairing tools

Composite Straight Air Drill Keyless Chuck, Spark Resistant Sledge Hammer

Roll Wrapping Printing Machine, tension control, Rubber Lining

Rubber expander roller for Paper Industry

Air Expanding Chuck, Rubber Tube, pneumatic tension control brake