Air Expanding Shafts Dealers

We are a well-known Air Expanding Shaft Manufacturer, Exporter and Supplier. Air Expanding Shaft, that we offer, is robustly constructed and precision engineered. The Air Expanding Shaft offers convenient operation. Our offered Air Expanding Shaft is very quick and does not damage rolls. Avail Air Expanding Shaft from us at the leading market prices.

We are offering air expanding shaft grippers are slit through the metal pipe & pneumatic bladder is used for inflating. The grippers give positive holding of the core. standardized design allow us to manufacture the shaft in any size diameter the same design can be offered for heavy duty to light capability shaft simple design ensuring a long service staggered lug design makes it best in winding application each lug offers a designed chamfer for easy core insertion for a full range of core sizes hardened lugs available for use with metal cores straight, staggered or offset patterns material pipe: steel or aluminum luge: steel, rubber or plastic size core id from 2" to 12� length up to 6000 mm("240") cantilever shaft various size of lug (gripper) contact : nr_industries@hotmail.com or at tushar jain-9891578427

For fast change over of un-winder/winder rolls air expanding shafts are required for core holding. Through its air valve air can fill and the air shaft will hold the core firmly by expanding the rubber bladder. Core gets released after removing the Air by thump press. Most commonly used cores are 3” ID core but bigger cores are also used where heavy weight of the unwind/re-wind rolls. Air expanding shaft is core-holding device suitable for 3” core inside diameter & 70mm core diameter. Lugs type Air expanding shaft is most commonly used for paper or PVC core holding. Square end Airshaft can be used with safety chucks for winding & winding.   The shaft can take load of 10kgs to 500kgs. Cantilever type Airshaft is available with one side shaft for mounting. Air valve can locate at face length or shaft end according to requirements. In case of failure of air shaft rubber bladder your service mechanic can easily replace the tube at your place itself. Importance is given to valve fitting and Teflon tape sealing of valve thread and to avoid damage of “O” rings. To avoid overfilling of air to avoid puncture of air bladder Air pressure Regulator filter Lubricator with pressure gauge so that know the in built air pressure inside the Air shaft. If require special hardened ends, bearing size it should be mentioned in your order. If less working width is used, the remaining Area of the shaft be inserted with empty core to avoid extra expansion of rubber bladder in the unused area of Air shaft to avoid blasting of rubber bladder.

• Finishing: Galvanized
• Shape: Round
• Material: Aluminium
• Outer Diameter: 60 mm
• Corrosion Resistance: Yes
• Overall Length: 3 m

• Length: Upto 2 meter
• Body: Alloy steel / Aluminium
• Available Sizes: 76 mm, 100 mm, 120mm 152 mm, 202 mm
• Lugs: Steel / Aluminimum
• Load Capacity: Upto 2000 kg
• Air Pressure: 0 to 6 Bar
• End Piece: EN-24 Hard Chrome Plated & Tempered
• Warranty: 12 Months for any manufacturing defects

Advantages Button Air Expanding Shaft is one of the most popular and requested design shaft. It is suitable for a full range of converting and web production operation. Button Air Expanding Shaft rugged construction and design is available for any diameter or length, in steel or aluminum with special designs available for heavy duty and light weight applications. We manufacture to your specifications to suit your equipment, including standard or varied button spacing, cantilevered or custom designed.

• Material: Aluminum
• Brand: RPEE
• Country of Origin: Made in India
• Color: Hard Anodize
• Packaging Type: Paper core
• Size(inch): 3/6/8/customize

Expanding strip, keyed and shafts manufactured in aluminium or steel or Ergal. For applications where unwinding and rewinding must be perfectly concentric, the Centrimax model is capable of centring the material perfectly on the reel, thanks to the pneumo-mechanical control system.

• Length: 5 Meter

Leaf type air expanding shaft, A large numbers of industries such as plastic, paper & packaging, polyester, film, foil, rolling mills, tire, textile process etc. use these types of shafts for winding and unwinding. Operations in different Fabricated using the newest technology, our products ensure no core harm, consistent operation and saves loading unloading time during the process. Further, our range is available in various lengths, sizes and other specifications as laid down by our clients.

• Features: Easy operating. , Fine finish , Accurate dimension , Durable ,

for fast change over of un-winder/winder roll air expanding shafts are required for core holding. Through its air valve air can fill and the air shaft will hold the core by expanding the rubber bladder.  core gets released after removing the air by thump press.  most commonly used cores are 3 inch id core but bigger cores are also used where heavy weight of the unwind/re-wind rolls. Air expanding shaft is core-holding device suitable for 3ã¢â‚¬â core inside diameter & 70mm core diameter. Lugs type air expanding shaft is most commonly used for  paper or pvc  core holding. Square end airshaft can be used with safety chucks for winding & winding. The shaft can take load of 30kgs to 500kgs. Cantilever type airshaft is available with one side shaft for mounting.

• Material: MS / SS / Aluminum
• Finishing: Mat / Mirror
• Country of Origin: Made in India
• Brand: Atul Rubber
• Outer Diameter: Till 200mm
• Bladder : Rubber / PU

• Capacity: 30kgs to 500kgs

Air Expanding Shaft is one of our widely sold and accepted product by our valued clients in the market, The design of Air Expanding shaft has been crafted keeping in mind all industry specific designs and sizes. For fast change over of un-winderwinder roll air expanding shafts are required for core holding. Through its air valve air can fill and the air shaft will hold the core by expanding the rubber bladder. Core gets released after removing the Air by thump press. Most commonly used cores are 3 inch ID core but bigger cores are also used where heavy weight of the unwindre-wind rolls. Air expanding shaft is core-holding device suitable for 3 inch core inside diameter & 70mm core diameter. Lugs type Air expanding shaft is most commonly used for paper or PVC core holding.

We take pride in announcing that we are the leading Manufacturer, Exporter & Supplier of Expanding Air Shaft, offering optimum quality Expanding Air Shaft that every client seek for. We do not compromise with the quality of the Expanding Air Shaft and use only high-grade components in the production. Clients can avail it at competitive market prices. More about Air Expanding Shaft : The catered range of Air Expanding Shaft is actually a core-holding device which is generally used for winding and unwinding operations in different important industries including plastic, polyester, paper & packaging, foil, rolling, textile process and many more. The offered shaft is meant for core inside diameter. On order to avoid the overfilling of air a special air gun is fitted with pressure so that in built air pressure which develops inside the Air Expanding Shaft is known. We truly understand the needs and requirement of the clients and thus manufacture the products as per their given samples and drawings. Product Features : Paper tube and wooden case packaging Excellent performance High precision shaft Reasonable prices

Expanding strip, keyed and shafts manufactured in aluminium or steel or Ergal. For applications where unwinding and rewinding must be perfectly concentric, the Centrimax model is capable of centring the material perfectly on the reel, thanks to the pneumo-mechanical control system.

We are offering air expanding shaft etc. We are offering air expanding shaft. air expanding shaft delivers superior performance for winding application in the widest range of roll handling process. air expanding shaft is one of the best cores gripping having widest range from heavy to light duty work. air expanding shaft minimize reel change over time. air shaft does not lead to any harm at the core surface. available sizes: 70mm, 76mm,101mm and 152mm core id.

• Type: Air Expanding Shafts
• Material: Alloy Steel, Aluminium
• Shape: Cylindrical
• Length: 500mm to 6mtrs
• Feature: Durable, High Efficiency
• Finishing: Coated
• Country of Origin: India

We manufacture all types and sizes of air shafts for label machine to paper mills. Our products are used for printing, packaging winding, unwinding, slitting of paper, film, foils, plastics, non woven and other flexible sheets.

Air Expanding Shafts, Air Shafts, Lug Air Shafts