Air Flow Sensor Dealers

• Type: Air Flow Sensor
• Output: 6 VDC
• Material: Plastic
• Brand: Omron
• Part Number: D6F-A1
• Supply Voltage: 3.15 to 3.45 V DC
• Maximum Pressure: 200 kPa
• Flow Rate: 0 t0 3 MPS
• Accuracy: 3.00%

• Features: Compact size , Easy to use , Efficient functionality

• Material: Metal & Plastic
• Application: Hospital
• Certification: ISI Certified
• Type: Reusable
• Country of Origin: India
• Size: Standard

Siemens QVM62.1 Air Flow Sensor is utilized to monitor air velocity in ducts.Features:• Mounting flange allows the installer to vary the probe insertion length into the duct space for best control• Mounting flange dampening gasket minimizes vibration• Graduated probe ensures maximum flow accuracy• Flow directional arrow provides for the most accurate reading• Connection cable provides mounting flexibility• Three jumper selectable flow measuring ranges accommodate any application or environment

• Type: Air Flow Sensor
• Application: Industrial
• Output: 5 VDC
• Supply Voltage: 8 to 15 VDC
• Response Time: 60 ms
• Power Consumption: 100 mW
• Flow Rate: 0 to 20.0 SLPM

• Output: 1 to 5 V DC
• Type: Mass Air Flow Sensor
• Application: Medical
• Flow Rate: 300 SLPM/s
• Accuracy: 4 %
• Maximum Pressure: operating pressure 15 PSI
• Operational Mode: Bidirectional
• Supply Voltage: 6 to 16 VDC
• Port Size: Fitting: 22 mm medical connector per ISO 5356 5
• Brand: ACT Sensors
• Part Number: AS40 SERIES
• Compatible for: Air medium in medical

The FS1000 is an insertion type airflow sensing element designed for quick, easy installation through a small cutout in the existing ductwork. Where multiple elements are required for proper duct traversing, the output ports are manifolded together, external to the ductwork. Each element is furnished complete with mounting hardware and sealing gaskets. Standard aluminum elements also include all brass compression fittings required to manifold the elements together. The FS1000 airflow sensing element is a head type device, which generates a differential (velocity) pressure signal similar to the orifice, venturi, and other head producing primary elements. The FS1000 is constructed so that strategically located sensing ports (based on duct size) continually sample the total and static pressures, when inserted normal to flow. The total pressures sensed by the upstream ports are continually averaged within the element in an isolated chamber. The static sensing ports (located where the influence of the velocity head is zero) are averaged in a second isolation chamber. Each chamber is then connected to one side of a differential measurement device (gauge, transmitter, etc.) for flow measurement and indication purposes.   Special Features : Low signal-to-noise ratio Multiple total and static pressure sensing ports along the length of the element Averaging internal manifold Insensitive to flow angle variations of as much as ±20° when faced in the normal direction of flow ±2% accuracy throughout the velocity rages of 100 fpm and over Standard construction is 6063-T5 aluminum with anodized finish Available in optional corrosive resistance materials including Type 316L stainless steel, Hastaloy, and Type 1 PVC Standard elements can be operated (in air) continuously in temperatures up to 350°F or inter mittently in temperatures up to 400°F All elements can be operated in humidity ranges of 0 to 100% Standard elements have good salt air and mild acid resistance; excellent solvent and aromatic hydrocarbon resistance

• Vehicle Name: BMW
• Model Name/Number: 7533853

• Type: Mass Air Flow Sensor
• Application: Industrial
• Flow Rate: 0-20 SLPM
• Output: 5 VDC
• Supply Voltage: 8 to 15 VDC
• Material: Plastic
• Brand: Honeywell
• Part Number: AWM5104VN
• Power Consumption: 100 mW
• Response Time: 60 ms
• Features: Consume less power, Easy to use, Top notch quality

• Type: Air Flow Sensor
• Application: Medical
• Material: Plastic
• Warranty: 12 Months
• Brand: Hamilton
• Category: Flow Sensor

Honeywell Zephyr™ HAF Series sensors provide an analog interface for reading airflow over specified full-scale flow and compensated temperature ranges. The thermally isolated heater and temperature sensing elements help these sensors provide a fast response to air or gas flow. Zephyr sensors are designed to measure mass flow of air and other non-corrosive gases. Standard flow ranges are available at ±50, ±100, ±200, ±400 or ±750 SCCM. Custom flow ranges are also available. The sensors are fully calibrated and temperature compensated with an onboard Application Specific Integrated Circuit (ASIC). The HAF Series is compensated over the temperature range of 0 °C to 50 °C [32 °F to 122 °F] and operates across a temperature range of -20 °C to 70 °C [-4 °F to 158 °F]. The state-of-the-art ASIC-based compensation provides analog outputs with a response time of 1 ms. These sensors operate on the heat transfer principle to measure mass airflow. They consist of a microbridge Microelectronic and Microelectromechanical System (MEMS) with temperature-sensitive resistors deposited with thin films of platinum and silicon nitride. The MEMS sensing die is located in a precise and carefully designed airflow channel to provide repeatable response to flow.Zephyr sensors provide the customer with enhanced reliability, high accuracy, repeatable measurements and the ability to customize sensor options to meet many specific application needs. The combination of rugged housings with a stable substrate makes these products extremely robust. They are designed and manufactured according to ISO 9001 standards.

• Type: Air Flow Sensor
• Application: HVAC
• Material: Plastic
• Flow Rate: 100 SLPM
• Accuracy: 2%
• Operational Mode: Bidirectional
• Supply Voltage: 5 V DC

• Type: Air Flow Sensor
• Application: Air Flow Indication, Industrial Use
• Feature: Easy To Install, Electrical Porcelain, Four Times Stronger, Proper Working, Sturdy Construction, Superior Finish, Water Proof
• Frequency: 0-50Hz, 100-200Hz, 200-400Hz, 50-100Hz
• Warranty: 1yr, 2yrs, 5yrs
• Current Type: Double Phase, Single Phase, Triple Phase

• Brand Name: Honeywell
• Type: Airflow
• Application: Industrial
• Output: 0-1/5/10 V
• Sensing Point: 200 SLPM
• Supply: 10-29V DC

• Type: Air Velocity Sensor
• Application: HVAC
• Output: 0-5v
• Features: State-of-the art constant T technology,Small sensor body for compact locations,Fully interchangeable with one another
• Brand: Broiltech
• Part Number: F333
• Supply Voltage: 3.5 V DC

• Type: Air Flow Sensor
• Application: Air Flow Indication, Industrial Use
• Feature: Easy To Install, Electrical Porcelain, Four Times Stronger
• Warranty: 1yr, 2yrs
• Current Type: Double Phase, Single Phase
• Sensing Point: 200 SLPM

• Features: Compact design, Easy to install, High sensitivity

Siemens QVM62.1 Air Flow Sensor is used to monitor air velocity in ducts.   Features: • Mounting flange allows the installer to vary the probe insertion length into the duct space for best control • Mounting flange dampening gasket minimizes vibration • Graduated probe ensures maximum flow accuracy • Flow directional arrow provides for the most accurate reading • Connection cable provides mounting flexibility • Three jumper selectable flow measuring ranges accommodate any application or environment

• Output: 12 to 24 V DC
• Material: Plastic
• Application: Automobile
• Supply Voltage: 5 V DC

The AKCess Pro airflow sensor is designed for systems that generate heat in the course of their operation and a steady flow of air is necessary to dissipate this heat generated. System reliability and safety could be jeopardized if this cooling airflow stops.

air velocity flow sensors, Pressure Gauges, controlling instrument

air flow sensor, Gas Meter

Honeywell Air Flow Sensor, Honeywell Temperature Controller