Alarm Cables Dealers

Our products are completely manufactured using premium raw supplies to make sure they adhere to global management standards of quality. As, our organizations is a suppliers of TP FRTEK cables; purchasers can place wholesale orders for it, and get them at the lowest prices.   Specifications : BS 8519:2010 - Code of practice for Selection and installation of fire-resistant power and control cable systems for life safety and fire-fighting applications. BS 5839-1:2008 - Code of practice for system design, installation, commissioning and maintenance – Fire Detection / Fire Alarm systems for buildings. BS 5839-8:2008 - Code of practice for the design, installation, commissioning and maintenance of Voice alarm systems. BS 5839-9:2011 - Code of practice for the design, installation, commissioning and maintenance of Emergency voice communication systems. BS 5266-1:2005 - Code of practice for the emergency lighting of premises. BS 7629-1:2008 - Specification for thermosetting insulated, unarmoured, screened fire-resistant cables of rated voltage 300/500V, having low emission of smoke and corrosive gases when affected by fire. BS 7846:2009 - Specification for thermosetting insulated, armoured, fire-resistant cables of rated voltage 600/1000V, having low emission of smoke and corrosive gases when affected by fire. BS 8491:2008 - Method of assessment of fire integrity of power cables with diameter greater than 20mm (as per BS 8519:2010). Retain Circuit integrity at 600/1000V under Simultaneous application of constant Flame at 850oC, Direct Mechanical Impacts & High Pressure Water Jet. The test duration is expressed in minutes depending on the required time duration of the application as follows : Category 1 - 30 minute Category 2 - 60 minute Category 3  - 120 minute BS 8434-2:2009 - Fire performance “Enhanced Test” as per BS 5839 Part 1, 8 & 9 (For conductor size upto and including 4sq mm) Method for assuessment of fire integrity of small cables for use in emergency Circuits. Retain Circuit Integrity at 930oC.Duration of test is 120 mins. Initial 60 mins. with Fire and Impact followed by an additional 60 mins. with Fire, Impact and Water Phase.

• Type: Fire Alarm Cable
• Application: Home
• Thickness: 0.5-1mm, 1.5-2mm, 2.5-3mm, 3.5-4mm, 4.5-5mm, 5.5-6mm
• Color: Red
• Voltage: 110V, 220V
• Power: 1-3kw, 3-6kw
• Feature: Crack Free, Durable, Heat Resistant
• Outer Material: Neoprene Rubber, Rubber
• Internal Material: Copper

We supply Unshielded Fire Alarm Cable that is suitable to be used for electronic circuits. These Unshielded Fire Alarm Cables are fabricated using well-tested material as per the set industrial standards. The clients can avail the properly insulated Unshielded Fire Alarm Cable from us in varied grades and specifications to cater their diverse requirements. We offer the Unshielded Fire Alarm Cable at highly affordable price. Product Description Solid bare copper PVC insulated PVC jacketed Rated 105o C 300V Rated, 500V peak To inquiry about the desired product(s), just check the box and then click �Inquiry Now� button which is provided below.

• Application: Industrial, Commercial
• Certification: ISI
• Feature: Heat Resistant, High Tensile Strength
• Outer Material: PVC
• Voltage: 230V
• Size: 1.5 sq mm

These Fire Alarm System cable products are suitable for smoke alarms, voice communication, burglar alarms, microprocessor controlled systems, fire alarm systems, and more. Our prices are best in the industry. Chetan can manufacture them as per customer specifications.

We are known as one of the famed Fire Alarm Safety Cable Manufacturers from India. J-H(ST)H BD Fire Alarm Cable is a Halogen-Free Installation Cable or Fire Survival Cables in accordance with VDE 0815 with red outer sheath. The J-H(ST)H BD Fire Survival Cables is used to meet enhanced fire protection requirements concerning protection of people and high-value property. Being a major Fire Alarm Cable Manufacturers, we efficiently meet the bulk orders of Fire Safety Cables efficiently and well on time. The J-H(ST)H BD Fire Alarm Cable or Fire Resistant Cable is offered by us at reasonable prices.The company is one of the leading Fire Resistant Cable Manufacturers in India and to get the best Fire Fire Resistant Cable Solutions.Alankar Cable Industries is one of the leading Fire Cable Suppliers in Delhi. Details TP structure minimizes crosstalkDoes not emit any toxic or corrosive gases in the event of fire and resists the spread of fireAluminium-laminated plastic foil static screen with tin-plated drain wire minimises the interference of high frequency, electromagnetic field Applications This halogen-free, flame-retardant installation cable with static screen is used for telephone, data and signal transmission in subscriber stations and private branch exchange construction for telephone systems; on dry and wet premises as well as on and under plaster.

• Country of Origin: India
• Thickness: 9.5-10mm
• Color: Red
• Feature: High Ductility, Quality Assured, Heat Resistant
• Power: 3-6kw

A Fire Alarm Cable is a cable used for transmitting fire alarm signals. They are typically made of two or more conductors, each with numerous insulated wires running through them. The cables are designed to be resistance-welded together, creating a single unit that can withstand the heat and abuse for the protection of fire alarm systems.   Fire alarm cables are typically made from thermoplastic materials and copper, making them resistant to flame and heat. They also have a high degree of flexibility, making them ideal for use in tight spaces. And because they are designed for use in fire alarm systems, they meet all the necessary safety and compliance standards.   There are a few different fire alarm wire types Armoured/Unarmouured. that you can choose from for your residential or commercial property.

• Color: RED
• Insulation Material: FRLS
• Brand: POLYCAB
• Core: 2CORE

• Model No: 51202343-001
• Product Type: CABLE ALARM
• Manufacture: Honeywell
• usage: Industrial Application
• Warranty: 1 Year
• Part No: 51202343-001
• LOC :-: 302-F-02

model no :51202343-001   product type : cable alarm loc :- 302-f-02 grn :- 932 alarm cables 51202343-001 (12-foot long) to connect power supply alarm contacts to 24vdc digital inputs on the iom   manufacture : honeywell     usage : indutrial automation     warranty : 1 year  

• Type: Fire Alarm Cable
• Application: Home, Industrial
• Thickness: 0.5-1mm, 1.5-2mm, 2.5-3mm, 3.5-4mm, 4.5-5mm, 5.5-6mm, 6.5-7mm
• Color: Multi Colour
• Voltage: 110V, 220V
• Power: 1-3kw, 3-6kw
• Feature: Crack Free, Durable
• Outer Material: Neoprene Rubber, Rubber
• Internal Material: Copper

We offer a comprehensive range of special Cable Wires, which are used in high security equipments. Available in different length and sizes, these cable can withstand high temperature.These cables have Fire retardant properties. Effective in long duration use, these wires withstand a significant degree of stretch and bend.   Revti Electronics Industries carries a full stock of multi-conductor shielded and unshielded fire system cable, as well as a full stock of multi-paired unshielded fire alarm cable. Revti also carries shielded and unshielded heavy duty armored fire system cable products consist of many wire conductors within. Revti has been a staple provider of Fire Alarm-Security (FAS) cables for more than a decade, providing reliable interconnection within fire alarm security systems, smoke and fire detectors, fire alarms and emergency communication systems.   Our standard and Fire Alarms are the workhorses of the fire alarm cable industry.  Revti Electronics Industries’ solid /stranded annealed plain electrolytic grade copper conductor core (as per IS:8130) insulated with extruded PVC conforming to IS:5831. Two such cores twisted together to form a pair and wrapped with aluminum backed Mylar tape with drain wire of ATC copper,PVC inner sheathed, GI wire / Strip armoured and finally sheathed with special PVC compound.

18 pair alram cable   1.   frequency -  18GHZ 2.   impedence - 50 ohms 3.   vswr -  1.25:1(max) 4.  voltage rating-  500 max

• Type: Fire Alarm Cable
• Application: Home, Industrial
• Thickness: 0.5-1mm, 1.5-2mm, 2.5-3mm, 3.5-4mm, 4.5-5mm, 5.5-6mm, 6.5-7mm, 7.5-8mm, 8.5-9mm, 9.5-10mm
• Color: Black, Green, Red, White, Yellow
• Voltage: 110V, 220V, 380V, 440V
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Feature: Crack Free, Durable, Heat Resistant, High Ductility, High Tensile Strength, Quality Assured
• Outer Material: Neoprene Rubber, Rubber, Silicone Rubber
• Internal Material: Copper

  We supply top-grade Alarm Cable, which is produced using high-quality PVC and can be availed in customized length. To deliver the products in a safe manner at customer's end, we have exceptional warehouse management system. We have a voluminous warehouse, installed with all required facilities essential for safe storage of the orders. With the assistance of our excellent logistics facility, we are able to deliver the orders within the postulated time frame.

• Type: Fire Alarm Cable
• Application: Industrial
• Thickness: 1.5-2mm
• Certification: ISI
• Voltage: 110V
• Feature: Quality Assured
• Internal Material: Copper
• Brand Name: 1.5*2 core cable for fire alarm
• Application: Fire Alarm
• Color: red

• Brand Name: Synergy
• Country of Origin: Delhi,India
• Model Number: sy 0013
• Port: Delhi Hub

• Country of Origin: India
• Type: Fire Alarm Cable
• Certification: ISO 9001:2008
• Color: Red
• Feature: Crack Free, Durable, Heat Resistant, High Ductility, High Tensile Strength, Quality Assured
• Voltage: 1100 Volt
• Outer Material: FRLS PVC
• Internal Material: Copper
• Brand Name: EPSILLON
• Application: Fire Alarm System And Other Automation
• Number of Conductors: 2 Core
• Conductor Material: Multistranded Copper
• Insulation Material: XLPE
• Jacket: FRLS PVC
• Shielding: Alum Mylar rape
• Armouring: G I wire

The fire alarm systems use the Co-axial trunk Cables. These Cables are ideal for multi channel applications. The central conductor is made of Copper Clad Aluminum (CCA).Tony Cables specializes in manufacturing high quality fire alarm Cables. Salient features: Can withstand high temperature. These Cables have fire retardant properties.   The Cables are highly flexible and can withstand high degree of stretch and bend.   Good for long duration use.  

• Brand Name: TECHNOFLEX
• Material: PVC
• Conductor Material: COPPER
• Outer Material: FRLS PVC
• Color: Red
• Power: 1.1 kv
• Application: Fire Alarm
• Certification: ISO 9001:2008
• Feature: Heat Resistant
• Voltage: 440V
• Type: Fire Alarm Cable
• Thickness: 1.5-2mm
• Number of Conductors: 21
• conductor: Electrolytic Grade Copper Bare / Flexible Conductors.
• Country of Origin: India
• Insulation: pvc
• Jacket: FRLS PVC Sheathed
• Range: 0.5 / 0.75 / 1.0 / 1.5 / 2.5 Sq.mm up to 48 Pair
• Voltage Grade: 300 / 500 / 600 / 1100 V
• Primary Insulation: Heat Resistant PVC / PE / HR / FR
• Screening: Individual and / or Overall with Al-Mylaror Braided with Bare / Tinned  Copper
• Inner Sheath: FRPVC / FRLS PVC / ZHFR / LSZH
• Armoured: GI Round Wire / Flat Strip
• Outer Sheath: FRPVC / FRLS PVC / ZHFR / LSZh

• Material: Copper
• Color: Red
• Insulation Material: PVC
• Packaging Type: Roll
• Length: 305 mtr
• Wire Material: Ec Grade Copper
• Brand: Voltaic

• Voltage: 300/500V
• Temperature Range: -30°C to + 70°C

These cables are used in high rise buildings, commercial complexes, schools and educational institutions, hospitals, etc. for the connection with security systems like smoke detectors, emergency lightings, exit signboards and fire command center. These cables are used where the fire safety is utmost important.

• Material: copper & pvc
• Packaging Type: Bundle
• Length: 60 m
• Number Of Cores: 2 Core
• Brand: Electrostar cable
• Rated Voltage: 300 V
• Rated Temperature: 80 Degree Celsius
• Jacket Color: Red & Black both
• Diameter: 0.75 mm

Signal cables are imperative when you want to keep the signal to noise ratio and the capacitance to the minimum in presence of stray magnetic fields. They are used in sensitive areas where accurate data inputs are necessary viz. electronic industries and nuclear power plants. RTD (Remote Temperature Detection) cables carry temperature readings from remote or inaccessible areas to the control room.

These cable are used in high rise building, commercial complex, school and educational institutions, hospital, etc. for the connection with security system with smoke detectors, emergency lightings, exit signboards and fire command center. This cable are used where the fire safety is utmost important.

• conductor: Bare Copper – Solid, Stranded
• Insulation: EI5/ Silicon
• Material: Copper
• APPLICATIONS: For Fire detection and fire alarm systems, emergency and escape lighting, control circuits and fire fighting systems.

• Insulation: Gas injected foamed polyethylene
• Sizes: Trunk 412, 500, 540 & 715
• Inner conductor: Copper Clad Aluminum
• Outer conductor: Aluminum alloy tube
• Outer jacket: Black UV resistant PVC jacket
• Marking: Sequential length marking on every meter

About Product Co-axial Trunk cables are used generally to interconnect head-ends of different cable TV operators. These cables are used for transmission of cable / TV signals. The number of channels has gone up to over 100 channels. These cables are ideal for such multi channel applications. The central conductor is made of Copper Clad Aluminum (CCA) and is specially treated for making it bright. Smooth and circular before extrusion on-line since the high frequency signals travel on the conductor surface. This also makes the cable lightweight.   Features The cable is insulated with Nitrogen gas injected physical foam dielectric manufactured from imported polyethylene, which enhances the foaming upto 80%, which leads to lower attenuation. This also ensures that the insulation is free from impurities and the foam cell structure is uniform across entire length.