Alcohol Sensor Dealers

We have introduced new and advanced Alcohol Breath Sensor - IBlow10  which is based on Advanced SURACELL Fuel Cell Sensor Technolgy. With this Alcohol Detector alcohol level of 12 persons per minute can be measured and results are also displayed in numeric as well as low- high levels.Special Features:• New advanced highly sensitive SuracellTM sensor technology (Fuel Cell sensor)• With PC Connectivity• 12 people can be measured per minute • No mouthpiece required. Instead replaceable & washable Blow Cap provided for hygienic use• No calibration required until 5000 tests or 1 year, whichever is earlier• Reminder for Calibration & Grace period • LED Light Alerts (Red for Fail & Green for Pass)• Display Window Provided• Manual Sampling Function (Alcohol content in Liquid can be measured)• Slow and Fast Measuring Modes available • Adjustable Display and Power Off time• Built-in Magnet attachable to Vehicles

We supply technically sound Breath Alcohol Detector that identifies the blood alcoholic content in seconds. Our Digital Breath Alcohol Detector is available under the brand name of BACTRACK breathalyzer. Digital Breath Alcohol Detector, offered by us, is designed with advanced technology and in an innovative and user friendly design. Salient features of our Digital Breath Alcohol Detector. Sleek design Simple Accurate Easy to use Attractive design Professional accuracy Today, we have carved a niche as one of the key Electronic Breath Alcohol Detector Suppliers in India.

• Sensor type: Electrochemical Fuel Cell Alcohol Sensor
• Accuracy: ±0.04 mg/L(±0.08‰) at alert point
• Display range: 0.000-4.000 ‰BAC;
• Battery: 3.7V: 250mAh

We have introduced new and advanced Alcohol Breath Sensor - IBlow10 which is based on Advanced SURACELL Fuel Cell Sensor Technology. With this Alcohol Detector alcohol level of 12 persons per minute can be measured and results are also displayed in numeric as well as low- high levels.

• Part Number: MQ-3
• Application: Alcohol detector, Breathalyser
• Product Number:  
• Target Gas: Alcohol
• Sensitivity: <0.6
• Resolution: 300 – 10000ppm
• Temperature range: -10 to 50 °C
• Sensing element type: semiconductor
• Input Voltage : 5.0 (+/-)0.2 V DC/AC
• Power Consumption: 750mW

Alcohol DetectorCondition: NewSize: approx. 32 x 22 x 27mmMain chip: LM393, ZYMQ-3 gas detectorWorking Voltage: DC 5VWith signal output instructionsTwo-way signal output (TTL level output and analog output)TTL output effectively signal for low level(when the output low level signal lights, can directly connected microcomputer)Analog output 0 ~ 5v voltage, the higher the concentration, the higher the voltageHas a high sensitivity and good selectivityHas long service life and reliable stabilityRapid response recovery featuresFor motor vehicles and other prohibition drunken drivers homework personnel on-site testing, also used in other places of ethanol vapor detection .

• Operating Voltage: 5V
• Model / Part Number: MQ-3
• Target gases: alcohol
• Operating Humidity: 0-95%RH
• Preheat Duration: Over 24 hour
• Circuit voltage: 5V+-0.1
• Load resistance: 200K ohm
• Heater resistance: 33 ohm +-5%

• Model / Part Number: MQ-3
• Operating Voltage: 5 V
• Usage/ Application: Alcohol Detection
• Operating Humidity: 0- 95%RH
• Preheat Duration: Over 24 hour
• Circuit voltage: 5V +/- 0.1
• Load resistance: 200K ohm
• Heater resistance: 33 ohm +/- 5%
• Sensor Type: Semicoductor
• Concentration: 20- 10000 ppm
• Features: High sensitivity, Fast response and resume, Long life and low cost, Mini size.

• Power supply needs: 5V
• Interface type: Analog
• Pin Definition: 1-Output 2-GND 3-VCC
• Features: High sensitivity to alcohol and small sensitivity to Benzine,Fast response and High sensitivity,Stable and long life,Simple drive circuit
• Item Code: MQ-3
• Model / Part Number: MQ-3
• Target gases: Ethanol Vapour
• Operating Voltage: 5V
• Operating Humidity: 0-95%RH
• Preheat Duration: Over 24 hour
• Circuit voltage: 5V+-0.1
• Load resistance: 200K ohm
• Heater resistance: 33 ohm +-5%

• Power Supply: 5 Volts
• Features: High Sensitivity to Alcohol & small sensitivity to Benzine.Low Cost.Stable & Long Life.On board Power indication.
• Interface Type: Analog & Digital

• Features: Good sensitivity to alcohol gas Long life and low cost Simple drive circuit

Sensitive material of MQ-3 gas sensor is SnO2, which has lower conductivity in clean air. When the target alcohol gas exist, The sensor’s conductivity is more higher along with the gas concentration rising. Please use simple electronic circuit, Convert change of conductivity to correspond output signal of gas concentration. MQ-3 gas sensor has high sensitivity to Alcohol, and has good resistance to disturb of gasoline, smoke and vapor. The sensor could be used to detect alcohol with different concentration, it is with low cost and suitable for different application.

DIGITAL LCD DISPLAY WITH LIGHT BLUE BACKUP ADVANCED FLAT SURFACED ALCOHOL SENSOR PORTABLE & FASHION DESIGN QUICK RESPONSE AUDIO WARNING PRESET LIMIT SMART MCU CONTROL SENSOR FLAT DELF CHECKING DIRECT TESTING PROCESS LCD INDICATION LOW VOLTAGE INDICATION

• Concentration: 0.05 mg/L
• Operating Voltage: 5V ±0.1
• Current Consumption: 150mA
• Operation Temperature: -10°C

5V operation, Analog+Digital Output, threshold preset adjustable, Useful in making Breath Analyzer This module is made using Alcohol Gas Sensor MQ3. It is a low cost semiconductor sensor which can detect the presence of alcohol gases at concentrations from 0.05 mgL to 10 mgL. The sensitive material used for this sensor is SnO2, whose conductivity is lower in clean air. It’s conductivity increases as the concentration of alcohol gases increases. It has high sensitivity to alcohol and has a good resistance to disturbances due to smoke, vapor and gasoline. This module provides both digital and analog outputs. MQ3 alcohol sensor module can be easily interfaced with Microcontrollers, Arduino Boards, Raspberry Pi etc.

Alcohol Gas Sensor Item Code: MQ-3 Our offered Alcohol Gas Sensor work similar to the common breathe analyzer and used for detecting the concentration of alcohol in breathe. These sensors provide analog resistive output on the basis of alcohol concentration and are highly reckon for their fast response time and high sensitivity. Owing to the simple design, these alcohol gas sensors requires just one resistor for detecting and processing the result. Some of the features of our product are : 5V DC or 5V AC Operation Temperature: -10 to 70 degrees C Dimensions 16.8mm diameter Heater consumption: less than 750mW Requires heater voltage 9.3 mm height without the pins

• Weight: 0.05Kg

MQ303A is a semiconductor sensor for Alcohol detection. It has very good sensitivity and fast response to alcohol, suitable for portable alcohol detector. High sensitivity, Fast response and resume, Long life and low cost, Mini size.

alcohol sensor, Solar Water Pump Controller, electro mechanical actuators

MQ3 Alcohol / Gas sensor, ARDUINO UNO R3 Microcontroller Boards, power diodes

alcohol sensor, Laser Diode, Controller 2 IC, db connector

Alcohol Sensor Mq-3 Gas Sensor, Biometric Reader- R305

alcohol sensor, Laser Dot Diode Module Red Copper Head Tube, HM2007 Voice IC

Alcohol Gas Sensor