Altitude Chamber Dealers

From our unit in Roorkey, Uttarakhand we have emerged as one of the prestigious manufacturers, exporters and suppliers of the Altitude Chamber. These machines that we offer simulate conditions of high altitude and are sometimes used as training equipment by athletes and mountain climbers. The machines are designed and manufactured to meet all quality standards specified by the industry and are therefore robust and durable.

High and Low Temperature Altitude Test Chamber composed pressure-containing box shell and insulation structure, refrigeration system, add wet system,vacuum system and electric control system and other components.

Hypoxico's K2 High Flow SeriesIn order to meet the ever increasing demand for more robust and powerful hypoxic generators of the worlds leading athletic, research and military institutions, Hypoxico has developed a new line of the most powerful and intelligent hypoxic generators on the market, capable of providing up to 4000 liters per minute of hypoxic air. 500-4000 lpm airflow (compared to the 120 lpm of the Hypoxico Everest Summit Hypoxic Generator) Digitally adjustable AltitudeO2% control system (From 20.9%-9% with .1% resolution)

• Capacity: 100 Liter to 2000 Liter
• Model Number: KCS/ATC - 70
• Model No: KCS/ATC - 40
• Temperature Range: -40 °C to 150° C
• Humidity Range: N.A
• Controller: Microprosser PID
• Electrical Connection: 415 V AC +/- 10%, 50 Hz, 3 phase/N/PE.
• Test Standards: DIN, MIL, IEC,IS

We are the main supplier of this product.

Weiber Altitude Test Chamber combine temperature and altitude to test basic components or subassemblies designed for use in a variety of industries. With altitude test chambers, user can control the temperature environment for testing while simulating various altitudes from site level to 10,400 meters (25kPa). Altitude testing may be continued without temperature control up to 600,000 meters (0.1 kPa). High Low Temperature Altitude Test Chamber is used to test temperature and low-pressure altitude conditions simultaneously. Two common applications of High Low Humidity Altitude Test Chamber are testing of avionics or other aerospace equipment to simulate actual conditions, and simulate high-altitude conditions found in mountainous regions or other regions. All models are factory tested, with an ergonomic and maintenance cum user-friendly design. These CE approved test chambers are created with multi-layered insulation with double vapour barrier is of low 'K' factor, high density and of non-hygroscopic in nature. Weiber test chamber are made in accordance with the international standard. Weiber Test Chambers are GMP complaints and are also ISO and NABL certified. Touch Screen Controller is designed to save chamber programming and setup time. Removable USB I-stick simplifies access to profile, and audit trail files RS-232/485 serial communications offer a selection of communications options Easy Operation - Automatic temperature, and altitude control offer ease of use Safety Devices - A variety of electronic, refrigeration, and cabinet safeties are incorporated into the design, protecting both your product and chamber Reliable Performance - High quality components, and proven chamber design provide many years of trouble-free operation Dual Purpose - Operates as an altitude chamber and separate temperature chamber maximizing your investment Robust Vacuum System - High quality capacity vacuum pumps provide reliable performance. Flexible section in vacuum lines also prevents transmission of adverse vibration

Temperature range: -70 °C ~+150 °C (changeable according to user's demand) Temperature accuracy: less than ± 0.3 °C Temperature fluctuation: less than ± 0.5 °C Humidity range: 20% ~ 98%RH (10% ~ 98%RH is an optional spec.) Humidity stability: less than ± 2% RH Humidity uniformity: less than ± 3% RH Heat-up rate: More than 3 °C min Pull-down rate: More than 2 °C min Max. final vacuum: 1mbar (100pa) Vacuum pump: Two stage oil rotary pump or dry pump Condensing: Air cooled or water cooled type Volume: 345L, 405L, 512L,720L and (Different size of chambers are available on users demand.)

• Usage/Application: Industrial
• I deal in: new only
• Payment Mode: Online

• Condition: New,Used
• Voltage: 220 V,320 V,420 V,440 V
• Frequency: 50 Hz,60 Hz
• Grade: Automatic,Semi Automatic,Manual
• Usage: Simulation Temperature,Humidity,Altitude
• Materials: Stainless Steel,Cast Iron,Zinc

We are the main supplier of this product.

CME’s AT series of altitude test chambers are used to test aerospace/aeronautical components where pressure plays a significant role along with temperature and humidity. A standard AT chamber could simulate environmental conditions of up to 50 Km (above sea level) in its test space. Built with galvanised steel and the touch of epoxy based powder coating, the structure is rigid enough to withstand extreme testing conditions. The test space is made of 10 mm stainless steel (grade AISI-304), which is TIG welded and reinforced to withstand the pressure changes. It also has adjustable shelves and an entry port to conduct live testing on the specimen. TEFC motor with vacuum feedthrough sealing is used with an axial flow fan to maintain a smooth laminar air flow across the test space. To avoid condensation during low temperature cycles, heaters are provided along with dual silicone extruded gaskets in the test space frame. As rightly quoted “Good engineering is a perquisite for reliability”, a lot of detailing has gone in both the system designing and the component selection of the AT series. Be it in refrigeration system comprising the semi hermetically sealed reciprocating compressor, high efficiency evaporator unit, in-built water-cooled condenser, on-Demand cooling, et all. are all carefully designed to offer the best reliability to the customer. The chamber offer altitude ranges of up to 10 mbar, temperature range of -70 0C to 180 oC and time to vacuum of less of 30 min. AT series is equipped with the “Envicom Graphite series” controller, offering the benefits similar to the other chambers, the thermal shock chamber also has the Envicom Graphite Series controller which is touch enabled and bundled with miltiple features to augment the testing experience. The ports of Ethernet, RS 232 and RS 485 ensure remote monitoring of the chamber as well as integration with 3rd party software such as NI/Lab view. To learn more about the Envicom Graphite Series controllers, visit its page. The Altitude chamber can also be customized as per the test requirements. To know more visit the customized solution page.

Temperature Altitude Chamber, hot and cold chamber

altitude chambers, Cold Chambers, hot chambers, Humidity Chambers

altitude test chamber, Salt Spray Chamber, scientific testing instruments

altitude test chamber, Heating Climate Chamber, Vacuum drying chamber

altitude test chamber, Environmental Test Chambers

Altitude Test Chambers, Benchtop Temperature & Humidity Chambers

Combined Altitude Temperature & Humidity Chambers, Thermal Vacuum Chamber

altitude test chamber, Cyclic Thermal Shock Chamber

altitude test chamber, Ageing Test Oven