Analog Converter Dealers

PRODUCT DETAILS Analogue to digital converter circuit internally fitted inside a plastic moulded case (142x80x40) mm approx. Analogue signal 0-7V DC given by analogue input sockets is converted into digital output signal in 1V steps i.e. 001 for 1V, 010 for 2V and so on. Three LED's are used for representation of binary digital signal. The output voltage against each LED directly comes out through 4mm sockets and can be used for coupling it with DAC instrument. Operating voltage for the instrument is 12V DC. For more sensitivity of lower range, a selector toggle switch marked with (0-7V/0-2V) is used.

The trainer has on board DC +5V,±12V fixed Power supply, Variable Analog Input 0-5V and Digital TTL Logic level Indicator (3 No). On board 8 to 3 Priority Encoder IC wired with  OP-Amps as a comparator and Resistive network of different reference voltage to study the Analog to Digital Converter (A to D) and verify its truth table. Analog Input voltage range 0-5V, Digital Output 3 bits. Facility to change Analog Input and observe the corresponding Digital outputs.Objectives : To Study Concept of Analog to Digital Converter. To Study Analog to Digital (A-D) converter using Op-Amps and verify its truth table. To Observe and note the change in Digital Outputs w.r.t. change in Analog Inputs. Accessories Included : Set of Patch Cords, Operating Manual.

• Certification: CE Certified
• Color: Silver
• Condition: New
• Driven Type: Electric
• Power Source: Electric
• Warranty: 1 Yr
• Product Name: DC DC CONVERTER

We are offering analog converter.

• Power: 24 W
• Brand Name: KRB
• Current: 50 mA
• Input DC Voltage: 12 V
• Frequency Range: 50 Hz
• Output DC Voltage: 5V
• Voltage Regulator IC: 723
• Minimum Order Quantity: 1 Piece

• Country of Origin: China
• Certification: CE Certified
• Condition: New
• Warranty: 1 Yr

This UNIT is based on a popular Microcontroller. It accepts up to 4 channels of Analog inputs. The converted data is displayed in engineering value and retransmitted as analog output for individual channel and also gives data on serial port RS-485/RS232. Specifications: Input: Up to 4 channels (4 to 20 mA) Interface: RS-232/485 Serial (MODBUS) Operating Voltage: 24VDC +/- 10%/110-230VAC (Factory configured) Power rating < 20 VA Key board: 4 keys keypad Display: 4 digit, 7-segment RED led Enclosure: General purpose, Plastic/polycarbonate, DIN rail/Wall mounting Dimensions: 70 mm(W) x 75 mm(H) x 110 mm(D) Optional: Analog Outputs: Up to 4 Channels: 4 to 20 mA, Individually isolated Application: Centralised monitoring of plant parameters Isolator

• Feature: Easy to install and simple to operate,Provides electromagnetic-noise-free transmission

This Digital to Analog Audio Converter is designed for either home or professional audio switching. It converts Coaxial or Toslink digital audio signals to analog LR audio and available for connection to an external device such as an amplifier via standard RCA-style jacks. This Converter is small in size and quite easy to install.

We offer Study of Digital-to-Analog Converter, DTA-01 useful for control labs. Measurement of the speed of a rotating shaft is a common requirement in many industrial and laboratory applications. Stroboscope, is a convenient-to-use, direct reading speed measuring instrument. A highly stable function generator IC based circuit provides the basic variable frequency timing pulses. These are read on an IC based LCD/LED counters with direct speed display in rpm. The flasher unit generates the high intensity flashes at a suitably scaled rate directed towards the rotating shaft. Precision potentiometer's makes the task of speed setting very precise. The portable model, fitted into a light weight and strong plastic body is more suited for industrial / class room environment. >> Highlights:- Basic 4-bit weighted resistance 4-bit R-2R network module 10-bit IC Type AD7533 with mechanical switches MIcroprocessor interfaced 10-bit converter >> Experiments:- Study of the circuit diagram and performance of a 4-bit weighted resistance type D/A converter. The digital inputs are to be given by operating four mechanical switches. The above experiment is conducted on a 4-bit discrete component R-2R network based unit. Manual operation of a 10-bit IC D/A converter type AD7533 through 10 mechanical switches. Operation of the IC based circuit through the microprocessor kit provided. Some typical waveform generation exercises are suggested and solutions are provided. More problems can be attempted by the student with help from his supervisor. >> Features and Specifications:- Advanced Experiments-arbitrary waveform generation Panel Meter for all measurements A measuring CRO is needed for viewing the waves forms The experiment is complete in all respect, except a CRO.

• Weight: 500g
• Input Supply: 230 VAC/50Hz mains operated.
• Dimension: 27cms x 17cms x 10cms.

Objectives : To demonstrate the operation and application of a  modern LSI D/A Converter. Parallel binary inputs from switches will be applied to the DAC, which in turn conv-erts the binary numbers into a proportional output voltage. Built in regulated power supply : +5V/300mA; + 12V/ 150mA; -12V/150mA.

• FRC Cinnector pins: 10, 14, 16, 20, 26, 34, 40, 50, 64
• D - SUB Connectror pins male / female: 9, 15, 25, 37, 50

The Gefen EXT-3G-HD-C converts audio and video from SDI to HDMI format, at resolutions up to 1080p Full HD. 3G-SDI, single link HD-SDI, and audio formats up to 8 channels of LPCM are supported. This product is fully compatible with the Gefen Syner-G™ software suite. The Gefen Syner-G™ is a powerful set of software tools specifically designed to help discover, configurecustomize, manage, monitor, and upgrade Gefen products. The Gefen EXT-3G-HD-C’s compact enclosure, while light enough to be held in place using double sided Velcro® tape, features an ISO standard 14-20 attachment provision as well as a detachable surface-mounting bracket. This, along with a flexible power input circuitry capable of accepting a wide range of DC voltages and a locking power supply connector, make the EXT-3G-HD-C ideal for cutting edge mobile AV applications as well as high performance fixed installations.

• Features: Electronic protection,Longer functional life,Durability

 Instrument comprises of DC Regulated Power Supply 5VDC/150mA, 0-10 VDC/150mA, ± 15VDC/150mA, 1 Voltmeter, 4 SPDT switches provided for selecting logic ‘1’ & logic ‘0’, one output indicators, Circuit diagram printed on the front panel.

• Model: ALABS-A31-001
• Categories: Digital Electronics Trainer
• Digital input word length: 4 Bits
• Input storage register: 4 D type flip-flops
• Analog signal variation: 0 to +5V
• Analog display: A voltmeter 0-5V with linear calibration
• Supply required: 230V ±10% at 50Hz A.C. Mains

We offer Study of Digital-to-Analog Converter, DTA-01 useful for control labs. Measurement of the speed of a rotating shaft is a common requirement in many industrial and laboratory applications. Stroboscope, is a convenient-to-use, direct reading speed measuring instrument. A highly stable function generator IC based circuit provides the basic variable frequency timing pulses. These are read on an IC based LCDLED counters with direct speed display in rpm. The flasher unit generates the high intensity flashes at a suitably scaled rate directed towards the rotating shaft. Precision potentiometer's makes the task of speed setting very precise. The portable model, fitted into a light weight and strong plastic body is more suited for industrial class room environment. Highlights >>Basic 4-bit weighted resistance >>4-bit R-2R network module >>10-bit IC Type AD7533 with mechanical switches >>Microprocessor interfaced 10-bit converter Experiments >>Study of the circuit diagram and performance of a 4-bit weighted resistance type DA converter. The digital inputs are to be given by operating four mechanical switches. >>The above experiment is conducted on a 4-bit discrete component R-2R network based unit. >>Manual operation of a 10-bit IC DA converter type AD7533 through 10 mechanical switches. >>Operation of the IC based circuit through the microprocessor kit provided. Some typical waveform generation exercises are suggested and solutions are provided. More problems can be attempted by the student with help from his supervisor. Features and Specifications >>Advanced Experiments-arbitrary waveform generation >>Panel Meter for all measurements >>A measuring CRO is needed for viewing the waves forms The experiment is complete in all respect, except a CRO.

• Place of Origin: Tamil Nadu, India
• Products Status: Stock
• Model Number: TRP-C68
• Brand Name: TRYCOM

• Country of Origin: Made in India
• Power: 24V DC
• Brand: Ulive systems
• Responds time: Less than 500 micro Sec
• Accuracy: less than 1%
• Ripple Noise in output: Less than 0.5%
• Input Signals: 4-20mA, 0-5V, 0-10V
• Power Isolation: 1KV rms
• Output Signals: 0-5V, 0-10V