2000 Amp Anodizing Rectifier
150,000 Per Piece
1 Piece (MOQ)
0.0
Website
anodizing rectifier
200,000 - 600,000 Per piece
Best Deals from Anodizing Rectifier
Electroplating Anodizing Rectifier
Get Price Quote
1 Piece (MOQ)
A variable voltage D. C. source is required for the Electro deposition process of electroplating, anodizing etc. The various ratings of voltages and currents required for the process depends upon the metal to be deposited and the process adopted. MARSZ Rectifiers are designed in standard voltages of 8 V to 24 V, and in current ratings varying from 100 Amps up to 10000 Amps. Up to 24V DC 10000 Amps for Electroplating and Anodising. Brief Specification: A.C. INPUT Rectifiers are designed to work on 415 V AC 3 ph. 50 Hz. supply and suitable for an input range of 360 V to 460 V AC 3Ph. Units of very small capacities namely 8 V / 12 V / 16 V / 20 V & 24 V DC up to 100 Amps ratings can also be supplied to work on an input voltage of 240 V AC 1 ph. 50Hz. supply. D.C. Output The DC output is continuously adjustable from zero to full rated value, from no load to full rated current, over the input range as described. All 3 phase units have low ripple of less than 5% and are suitable for all special processes such as chrome plating or hard chrome plating where low ripple content is necessary. Circuit and Components The units are assembled with high quality materials, and the components are manufactured to relevant specifications. MAIN TRANSFORMERS: The transformers are of class ‘A’ insulation and conform to IS 2026 in general. The laminations used are C.R.G.O Silicon steel, low loss type. The wound coils are impregnated with oven baked varnish. I.P.T: For high current units the transformers secondary is generally double wye. An I. P. T. wound with copper, is provided on its secondary, to extend the conduction period of windings and diodes. Silicon Rectifier: The Rectifier is assembled by using silicon diodes, mounted on heat sinks and connected in full wave circuits. Individual R.C. components are used for hole storage protection. The diode assembly is always selected to have at least 40% extra rating above the maximum output current. Regulator: In order to facilitate voltage variation from zero onwards “VARIVOLT” variable voltage auto transformers are used as independent units, or some times, accommodated in the transformer tank. Motorization is provided as an optional feature. The DC output is continuously adjustable from zero to full rated value, from no load to full rated current, over the input range as described. All 3 phase units have low ripple of less than 5% and are suitable for all special processes such as chrome plating or hard chrome plating where low ripple content is necessary Protection & Metering MCB / MCCB protection is provided on the input and 3 fuses are provided on the output of the “VARIVOLT” variable auto transformer. 3 pilot indicators are incorporated on the incoming side. Digital voltmeter and ammeter with suitable shunts are provided to read the output voltage and currents. Optional Features Following optional features can be provided: Remote switching-on by using contactors and bimetal over load relays. Push button operation by motorization of the “VARIVOLT” variable auto transformer. Constant voltage or constant current features using electronic circuits. “VARIVOLT” auto transformer with zero start facility. Timers, time totalizers, ampere hour meters, etc. Dimmerstat Output is an important factor in Electrode position processes. MARSZ provide a step less and continuous variation of output voltage, which is a far superior method to other methods of control like resistance boards, tap switches etc. The step less variation is achieved with the help of Dimmerstat’ which is Registered Trade name for Continuously Variable Voltage Auto Transformer manufactured by MARSZ. Unlike other methods of output control, Dimmerstat provides a step less, on-load and without break variation of output Voltage, without any loss of power. It being one of our own standard products, availability of spares or replacement is guaranteed, although the necessity is very rare. H.R.C Fuses Overloading or short circuiting is not a rare occasion in Electro deposition processes. Special High Rupturing Capacity (H.R.C.) fuses are therefore provided on the primary of the Main transformer. These fuses will blow only when there is overload or short circuit on the output or if there is an internal short circuit and in such cases they should be replaced by H.R.C. fuses of the same rating only. Double Wound Transformer This is of conventional design and conforms to standard specifications of IS 2026 as regards the temperature rise and insulation are concerned. The primary is delta connected and two secondaries have star connected windings. Interphase Transformer The IPT is connected between two star points of the secondaries of the main transformer; The Interphase transformer improves commutation thereby increasing the rating of the Rectifier. Rectifier These is made up of sturdy liberally rated Silicon diodes and are arranged in a six phase circuit. The diodes are mounted on cooling fins so as to dissipate the heat thereby increasing the rating of the diode. Depending upon the output current rating, necessary number of diodes is connected in parallel. Metering A Voltmeter and an Ammeter are provided on a separate panel to indicate the output voltage and output current. The panel is mounted on one of the tanks to enable easy manipulation with the help of the Dimmerstat. The ammeter is used in conjunction with an external shunt, which is fitted inside the tank. Construction The units are made in natural oil immersed construction. Any Electro deposition process is always associated with acidic and corrosive fumes and dust. Any contact with these fumes and dust obviously reduces the life and reliability of the Rectifier. Oil immersed construction offers best protection to the Rectifier unit in this regard and therefore increases the life enormously. The Dimmerstat is always housed in separate tank. For rectifier units up to a maximum output capacity of 100KW, the transformer and the rectifier are housed in one single tank. For higher capacities separate tanks for transformer and rectifier are used. For rectifier units of current rating 5000 amperes and above, the rectifier is supplied in Separate tank for better cooling. If the customer can guarantee that sufficient precaution is taken to see that corrosive fumes and dust do not come in contact with the rectifier unit, we will be pleased to make special offers for units in Air cooled or combined OIL/AIR cooled construction. Connection The mains supply is to be connected to the Dimmerstat input terminals by a cable of proper size through a switch fuse unit. The cable of same size should be used for connections from Dimmerstat output to the primary of the transformer.
anodizing rectifier
Get Price Quote
We offer Anodizing Rectifier. JINDAL'S manufactures a wide range of rectifiers covering 0-500 Volts and up to 15000 Amps. Capacity suitable for Electroplating, Anodizing, Hydrogenation and many other Electrochemical processes. The entire manufacturing process is under one roof ensuring 100% quality control at every stage of production. We believe in quality & customers satisfaction. ADVANTAGES : 1. Step-less On Load Voltage Regulator 2. Designed for 100% continuous load 3. Nil Waveform distortion 4. High Efficiency of up to 97% 5. Virtually zero maintenance APPLICATIONS : 1. Electroplating Electro-polishing 2. Anodizing plants 3. Metal mining, refining & extraction 4. Etching 5. Furnace & Heating systems 6. Electrophoresis coating plants 7. Metal & glass melting 8. Heating Lehrs 9. Effluent Treatment plants 10. Annealing processes 11. Production of Chlorine gas 12. Chemical electrolytic processes 13. Variable speed drives SPECIFICATIONS : The standard model conforms to the following specifications: 1. Output Voltage : From zero to max. Rated D.C. Voltage (upto 1000 Volts). 2. Output Current : From zero to max. Rated D.C. Current (upto 3000 Amps) 3. Input Voltage : 415V, 3-phase, 50 Hz, A.C. 4. Cooling : Natural Oil cooled 5. Modes of Operation : (a) Manual Control (b) Electrical with the help of push buttons (c) Mechanical with the help of T-Handle 6. Ripple Content: Less than 5% • Model with 1% ripple available as optional feature 7. EFFICIENCY: 12 V Rectifier: 82% 24 V Rectifier: 90% 100 V Rectifier:94% 200 V Rectifier:96% 250 V and above:>97% Note: Non-standard models are also available against specific requirements. OPTIONAL FEATURES : 1. Constant Voltage Controller (CVC) 2. Constant Current Controller (CCC) 3. D.C. Overload Trip system 4. Zero Run Down system 5. Programmable Ramping Arrangement 6. Signal Isolators to enable automation PLC compatibility.
0.0
View Profile
Plating Anodizing Rectifier
100,000 Per Piece
Salient Features: Electrolytic Prime grade copper strip to minimize power losses Suitable for over loading conditions Vertical rolling contact type voltage regulator The carbon rollers move on both sides of the winding Diodes: Silicon diodes are tested in-house, similar PIV batch Lamination Core: CRGO lamination core are used for minimum power losses Paints: epoxy paint which is resistant to acidic environment of plating process and provide insulation from rust Meter: DC meters with AE/RISHAB make Constant voltage controller (Cvc): CVC electronic attachment with rectifier equipment for maintaining output voltage or current Servicing: As early as possible
anodizing rectifier
Get Price Quote
Electroplating rectifier is a kind of electronic device which changes high voltage alternate current (a.c.) into low voltage direct current (d.c.). Electroplating rectifier is a very crucial component for any industry. For different industrial applications the electroplating rectifiers are available in a range starting from 1 volt to 1000 volts, to suit varying industrial requirements. Today these rectifiers are being used for various electro-chemical processes like anodizing, hydrogenation and more.
0.0
View Profile
anodizing rectifier
45,000 - 155,000 Per Piece
1 Piece (MOQ)
Rajlaxmi Machine Tools Manufacturing HMP And RAMATO Make Pillar Drill Machine, Bench Drilling Machine, Radial Drilling Machine, Drilling Cum Milling Machine, Milling Cum Drilling Machine, Tapping Machine, Welding Machine, ARC Mig TIG Spot Welding Machine, Grinder, Polisher, Belt Grinder, Buff Polisher, Buffing Machine, Shearing Machine, Bending Machine, Winding Machine, Bench Grinder, Pedestal Grinder, Automatic Belt Grinding Machine, Cutoff Machine, Cutting Machine, Air Compressor, Pressure Pump, Car Washer, Wood Working Machine, CNC Machine and All Type of Machienry and Tools From Rajkot Gujarat Bharat (INDIA).
anodizing rectifier
Get Price Quote
Designed for 100% Continuous Duty Cycle Compact Design for Space Saving Lesser Power Consumption Negligible Maintenance Tested at Each & Every Stage of Manufacturing Liberal Design & Rigorous Testing of the Equipment Enables Trouble Free Service for Long Life.
0.0
View Profile
anodizing rectifier
Get Price Quote
Our Vision is to become India's leading manufacturers of Digital Rectifiers. It's our mission to synchronise between human resources technology, systems and by producing quality products and providing services above par excellence, keeping in mind performance and price aspirations of our customers. while doing so, we maintain the highest standards of ethics and social responsibilities
0.0
View Profile
anodizing rectifier
500,000 Per Piece
01 Piece (MOQ)
0.0
View Profile
Plating Anodizing Rectifiers
Get Price Quote
We are one of the renowned manufacturers and suppliers of a wide gamut of plating and anodizing rectifiers. These rectifiers are used for dc application and are manufactured using high-grade raw material in accordance with industry laid norms and guidelines. All the products offered by us are widely demanded in the market for its various excellent features such as high efficiency and anti-corrosive nature. brief specifications: input voltage: 380 - 440 volts, 3-phase 50 hz. Ac supply output voltage: fixed rated maximum dc voltage or variable from zero to maximum rated voltage output current: rated maximum dc current temperature rise: less then 35ºc above ambient at the top of the oil
0.0
View Profile
Anodizing Electroplating Rectifier
85,000 Per Piece
0.0
View Profile
Electroplating Anodizing Rectifier
Get Price Quote
We manufacture and supply Electroplating Anodizing Rectifier that is available in various ranges and other technical specifications. Fabricated from high quality raw materials, our Electroplating Anodizing Rectifier has long functional life and renders consistent performance for longer period of time. Operating Conditions Operate from 380 to 440 voltsEnsure wide input fluctuationsMaximum ambient temperature of 45 degrees C Range of Silicon Plating Rectifiers D.C. Current : 100 amps, 200 amps, 250 amps, 300 amps, 500 amps, 750 amps, 1000 amps, 1500 amps, 2000 amps, 3000 amps, 5000 amps, and 7500 amps.Standard DC voltages : 6V, 8V, 12V, 16V, 20V, 24V etc. Our Strength We also can supply non-standard voltage and current as per the requirement of the clients. Salient Features Diode assemblyStep less motor operated regulatorDouble wound transformerMetering Ideal For ElectroplatingAnodizingElectro deposition processHydrogenation
0.0
View Profile
anodizing rectifier
Get Price Quote
These power rectifiers, anodizing rectifiers and electroplating power rectifiers are tailor made, covering a wide range from 200 Amps to 15000 Amps at different output DC voltage as per requirement.
0.0
View Profile
anodizing rectifier
158,000 Per Piece
0.0
View Profile
anodizing rectifiers
Get Price Quote
anodizing rectifiers, Arc Welding Machines, Plating Barrels
0.0
View Profile
anodizing rectifiers
Get Price Quote
anodizing rectifiers, Electroplating Rectifier, electroplating chemical
0.0
View Profile
anodizing rectifier
10,000 - 1,200,000 Per Bag
anodizing rectifier, Electroplating Rectifiers, All type rectifier
0.0
View Profile
anodizing rectifiers
Get Price Quote
anodizing rectifiers, CVT Transformer, Electroplating Rectifiers
0.0
View Profile
plating anodizing rectifiers transformer
Get Price Quote
Muskaan Power Infrastructure Ltd. is a reputable manufacturer, suppliers and exporters of Plating Anodizing Rectifiers Transformer. We are providing high quality Electroplating Anodizing Rectifiers at best prices.Get Best Price and Full Specification of Plating Anodizing Rectifiers Transformer Manufacturer.
0.0
View Profile
Post Free Ad
