Arduino Board Dealers

• Type: Arduino Shield
• Condition: New

The Arduino Uno R3 is a microcontroller board based on a removable, dual-inline-package (DIP) ATmega328 AVR microcontroller. It has 20 digital input/output pins (of which 6 can be used as PWM outputs and 6 can be used as analog inputs). Programs can be loaded on to it from the easy-to-use Arduino computer program.

• Price: Rs. 390

We make sure that the products we offer to our clients will remain free from any kind of damage. Thus, we store the entire lot under secured environment in our capacious warehouse. Online payment processing that we offer is secure, instant and hassle free. Apart from online payment, we also facilitate payment against purchases through offline mediums.

Arduino Original Board UNO with Cable The best board to get started with electronics and coding. Overview: The Uno is a microcontroller board based on the ATmega328P. It has 14 digital inputoutput pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. You can tinker with your UNO without worrying too much about doing something wrong. "Uno" means one in Italian and was chosen to mark the release of Arduino Software (IDE) 1.0. The Uno board and version 1.0 of Arduino Software (IDE) were the reference versions of Arduino, now evolved to newer releases. Features: · The Uno is open-source hardware! You can build your own board. · The Uno board can be powered via the USB connection or with an external power supply. The power source is selected automatically. · The Uno has a number of facilities for communicating with a computer, another Uno board, or other microcontrollers. · The Uno can be programmed with the Arduino Software (IDE). Technical Specifications: Microcontroller ATmega328P Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limit) 6-20V Digital IO Pins 14 (of which 6 provide PWM output) PWM Digital IO Pins 6 Analog Input Pins 6 DC Current per IO Pin 20 mA DC Current for 3.3V Pin 50 mA Flash Memory 32 KB (ATmega328P) of which 0.5 KB used by bootloader SRAM 2 KB (ATmega328P) EEPROM 1 KB (ATmega328P) Clock Speed 16 MHz Length 68.6 mm Width 53.4 mm Weight 25 g

• Type: Automatic
• Color: Blue
• Material: Plastic
• Voltage: 220 V
• Condition: New
• Warranty: 1 Year

• ATmega328: 32 KB (ATmega328) of which 0.5 KB used by bootloader

The arduino -bluetooth is a microcontroller board based on The atmega328.it has 14 digital inputoutput pins (of which 6 can Be used as pwm outputs), 6 analog inputs, a 16 mhz ceramic resonator, And a reset button. It contains everything needed to support the microcontroller; Simply connect it to a computer with a usb cable or power it with a ac-to-dc adapter Or battery to get started. It has bluetooth on board so this board can be Applied to android applications and wireless applications.

• DC Current per I/O Pin: 40 mA
• Analog Input Pins: 8
• Flash Memory: 16 KB (ATmega168) or 32 KB (ATmega328) of which 2 KB used by bootloader
• SRAM: 1 KB (ATmega168) or 2 KB (ATmega328)
• EEPROM: 512 bytes (ATmega168) or 1 KB (ATmega328)
• Clock Speed: 16 MHz
• Dimensions: 0.73" x 1.70" inch
• Operating Voltage (logic level): 5 V
• Input Voltage (recommended): 7-12 V
• Digital I/O Pins: 14 (of which 6 provide PWM output)

• Brand Name: ARDUINO
• Analog Input Pins: 8
• Clock Speed: 16 MHz
• Model Name/Number: Nano Board
• ROM Type: EPROM, Flash
• Dc Current Per I O Pin: 40 mA
• Eeprom: 1 KB
• Flash Memory: 32 kb (of which 2KB used by bootloader)
• Speed(MHz): 16MHz
• Input Voltage Recommended: 7-12 V
• Sram: 2 KB
• Core Size (Number of Bits): 16 Bit, 4 Bit, 8 Bit
• Voltage Range: 5 V
• Microcontroller: Atmel ATmega168 or ATmega328
• Digital I O Pins: 14 (of which 6 provide PWM output)
• Dimensions: 0.73 * 1.70 inch

• Country of Origin: India
• Type: Automatic
• Color: Blue
• Condition: New
• Architecture: AVR
• Microcontroller ATmega328 (SMD) – Interface CH340G: Digital I / O Pins 14 (of which 6 provide PWM output)
• Input Voltage (recommended): 7-12V: Input Voltage (limits): 5-20V

• Color: Blue
• Type: Electronic Board
• Power Source: Electric
• Size: Standard

Arduino UNO is upgrated version of arduinoDuemilanove. It use ATmega8U2 as replacement of FT232RL. Besids USB-UART bridge, it can also be configuraed as mouse, joystick, keyboard or camera. FeaturesMicrocontroller ATmega328Operating Voltage 5VInput Voltage (recommended) 7-12VInput Voltage (limits) 6-20VDigital IO Pins 14 (of which 6 provide PWM output)Analog Input Pins 6DC Current per I/O Pin 40 mADC Current for 3.3V Pin 50 mAFlash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloaderSRAM 2 KB (ATmega328)EEPROM 1 KB (ATmega328)Clock Speed 16 MHz

The LilyPad Iduino can be programmed with the Arduino software . *Note*, the LilyPad Arduino should only be programmed with software versions 0010 or higher. You can program it with earlier versions, but all of the time related functions will be off (twice as slow as they should be). The ATmega168V or ATmega328V on the LilyPad comes preburned with that allows you to upload new code to it with the Arduino software. You can also bypass the bootloader and program the ATmega through the ICSP (In-Circuit Serial Programming) header. FEATURE Microcontroller ATmega328V Operating Voltage 2.7-5.5 V Input Voltage 2.7-5.5 V Digital IO Pins 14 (of which 6 provide PWM output) Analog Input Pins 6 DC Current per IO Pin 40 mA Flash Memory 16 KB (of which 2 KB used by boot loader) SRAM 1 KB EEPROM 512 bytes Clock Speed 8 MHz

• Power: Through USB-C connector or LiPo battery (integrated charger)
• Features: High-end industrial machinery,Laboratory equipment,Computer vision,PLCs,Industry-ready user interfaces,Robotics controller
• Model: Arduio Pro Portenta H7
• Main Prosessor: STM32H747XI dual Cortex-M7+M4 32bit low power Arm MCU
• SDRAM: 8-64 MByte option
• QSPI Flash: 2-128 MByte option
• Ethernet: 10/100 Phy option
• Wireless: BT5.0 + WiFi 802.11 b/g/n 65Mbps option
• Crypto Chip: ECC608 or SE050C2 (Common Criteria EAL 6+) option
• Display Connector: MIPI DSI host & MIPI D-PHY to interface with low-pin count large displays
• GPU: Chrom-ART graphical hardware Accelerator
• Timers: 22x timers and watchdogs
• UART: 4x ports (2 with flow control)
• SD CARD: Interface for SD Card connector (through expansion port only)
• OPerating Temperature: -40 C to +85 C
• Current Consumption: 2.95 A in Standby mode (Backup SRAM OFF, RTC/LSE ON)
• USB-C: Host / Device, DisplayPort out, High / Full Speed, Power delivery
• MKR Headers: Use any of the existing industrial MKR shields on it
• High Density Connectivity: Two 80 pin connectors will expose all of the board's peripherals to other devices
• ESLOV Connector: Arduino's open connector standard for self-identifiable hardware
• Camera Interface: 8-bit, up to 80 MHz
• ADC: ADC 3 ADCs with 16-bit max. resolution (up to 36 channels, up to 3.6 MSPS)
• DAC: DAC 2 12-bit DAC (1 MHz)

The UNO is the best board to get started with electronics and coding. If this is your first experience tinkering with the platform, the UNO is the most robust board you can start playing with. The UNO is the most used and documented board of the whole Arduino family.   Arduino/Genuino Uno is a microcontroller board based on the ATmega328P. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.. You can tinker with your UNO without worring too much about doing something wrong, worst case scenario you can replace the chip easily at a reasonable price and start over again.

The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328.  

UNO PLUS is a development board compatible with the Arduino UNO R3, an improved & enhanced alternative solution for Arduino UNO R3.   ATMEGA328P-AU AMS1117-3.3 : 3.3V voltage regulator NCP1117ST50T3G : 5V voltage regulator FT232RL : USB to UART convertor Arduino interface compatible with standard Arduino interface with two additional analog inputs A6 (config the CFG), A7 solder pads provided, supports prototype breadboard ICSP interface MICRO USB connector : for uploading program OR serial port debugging Power output header : 3.3V OR 5V, voltage level configured by the onboard power configuration switch, used as power output OR common-grounding with other boards FT232 pins : for burning Bootloader into the microcontroller DC input : 7V ~ 12V Reset button Power indicator Serial port Rx/Tx indicator User LED Power configuration switch : for configuring the operating voltage Bootloader selection switch turn ON : the board will reset when power-up OR other USB devices were detected connecting to the PC turn OFF : the onboard program runs immediately when power-up, and the board will not reset when other USB devices were detected connecting to the PC

• Material: Plastic
• Color: Blue
• Voltage: 7-12V
• Condition: New
• Current Type: AC, DC
• Clock Speed: 16 MHz, 18 MHz, 20 MHz
• Architecture: AVR
• Analog Input Pins: 12, 16, 8
• Type: Automatic

• Feature: Orignal and Brand new product Especially designed for Arduino beginners

The Arduino Uno is a microcontroller board based on the ATmega328 ."Uno" means one in Italian and is named to mark the upcoming release of Arduino 1.0. It has 14 digital inputoutput pins , 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega16U2Atmega8U2 up to version R2) programmed as a USB-to-serial converter. This is your first step towards interfacing the lcd and keypad with your arduino