Arduino Electronic Development Board Dealers

• Product Code: combo-UNO kit-01
• Product Tags: COMBO-ARDUINO-UNO-01
• Category: ARDUINO
• Availability: In Stock

We have hired a team of professionals who hold immense knowledge of packaging. They make use of premium packaging material so as to make damage free deliveries. Our well-maintained and capacious warehouse helps us in managing systematically arrangement of goods and meeting massive requirements of the clients at a time.   Details Arduino UNO with Cable + 20 Pieces Each Jumper (MM/MF/FF) + 3 Pieces Each 1x40 Header Strips 1 Piece LCD 16x2 + 1 Piece Servo SG90 + 1 Piece 4x4 Keypad Sensors: 1 Piece PIR (HC-SR501) + 1 Piece Ultrasonic(HC-SR04) + 2 Pieces IR Module Components: LED 5 Pieces Each(RED,GREEN,WHITE) + 2 Pieces Switch 4 Pin + 2 Pieces Buzzer 5V Interfacing Board: 1 Piece one Channel 5V Relay Board + 1 Piece L293D Motor Driver Board

• Brand Name: Arduino
• Material: Plastic
• Color: Blue
• Voltage: 220 V
• Condition: New
• Warranty: 1 Year

The Arduino Uno R3 is a microcontroller board based on a removable, dual-inline-package (DIP) ATmega328 AVR microcontroller. It has 20 digital input/output pins (of which 6 can be used as PWM outputs and 6 can be used as analog inputs). ... The R3 is the third, and latest, revision of the Arduino Uno.

• Operating Voltage: 5v
• Microcontroller: ATmega328
• Input Voltage (recommended): 7-12V
• Input Voltage (limits): 6-20V

The Arduino Duemilanove ("2009") is a microcontroller board based on the ATmega328. It has 14 digital inputoutput pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHzcrystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations). This allows for faster transfer rates and more memory. No drivers needed for Linux or Mac (inf file for Windows is needed and included in the Arduino IDE), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc. The Uno R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Uno R3 works with all existing shields but can adapt to new shields which use these additional pins. Arduino is an open-source physical computing platform based on a simple io board and a development environment that implements the ProcessingWiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux). FEATURES: Microcontroller ATmega328 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital IO Pins 14 (of which 6 provide PWM output) Analog Input Pins 6 DC Current per IO Pin 40 mA

• Kit contains: 1- Arduino Uno Board, 1-USB Cable.
• Weight::       55.00g ±5%
• Product Code::       Arduino-UNO-R3
• specification: Arduino UNO R3 board with DIP ATmega328P.The Arduino Uno does not include Batteries, or a DC power adapter. No external programmer is required.

The Arduino Uno R3 ATmega328P is a micro controller board based on the ATmega328. It has 14 digital inputoutput pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the micro controller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

• Brand Name: Arduino
• Clock Speed: 84 MHz
• Features: These are compatible with all arduino compatible shields and the arduino ide, It has a standard 6x1 avr isp header, It comes with an atmega328 with a pre-burnt arduino boot loader.
• Operating Voltage: 1.8 - 5.5 V
• DC Current : 800 mA
• Packaging Type: Box
• SRAM: 96 KB

• Input: 5V(DC)
• Operating current (without signal output state): less than 15 mA
• Operating current (with signal output state): less than 40 mA
• Chip: KT403A
• Chip LDO output voltage: 3.3 V
• Chip output current: 100 mA(at Max.)
• File formats supported: MP3, WAV, WMA
• Maximum memory supported for SD card: 32 GB
• Sampled rate: 8/11.025/12/16/22.05/24/32/44.1/48 (kHz)
• Features: General operations on audio files,On-board micro-SD slot and 3.5mm audio jack,Support sample rate of 8/11.025/12/16/22.05/24/32/44.1/48(kHz)

This is the new Arduino Uno R3 which uses an ATmega16U2 instead of the 8U2 or FTDI chip found on previous boards. This allows for faster transfer rates and more memory. No drivers needed for Linux or Mac (inf file for Windows is needed and included in the Arduino IDE), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc.Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer. Arduino IDE can be freely downloaded from is is currently available for Mac OS X, Windows, and Linux.   Uses Atmega328 microcontroller and Atmega16U2 for bootloading Input Voltage from 7v - 12v 14 Digital I/O Pins 6 Analog Pins 32K Flash Memory 16Mhz Clock Free IDE for programming Includes USB cable

Arduino UNO is upgrated version of arduinoDuemilanove. It use ATmega8U2 as replacement of FT232RL. Besids USB-UART bridge, it can also be configuraed as mouse, joystick, keyboard or camera. FeaturesMicrocontroller ATmega328Operating Voltage 5VInput Voltage (recommended) 7-12VInput Voltage (limits) 6-20VDigital IO Pins 14 (of which 6 provide PWM output)Analog Input Pins 6DC Current per I/O Pin 40 mADC Current for 3.3V Pin 50 mAFlash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloaderSRAM 2 KB (ATmega328)EEPROM 1 KB (ATmega328)Clock Speed 16 MHz

• Voltage: 3.3-5V
• Voltage: 12 V DC
• Weight: 7-8 Gram
• Flash Memory: 32 KB
• Packaging: Box
• Size: 70mmx54mm

The Arduino Due is the first Arduino with an ARM-based microcontroller. It is based on the Atmel SAM3X8E ARM Cortex-M3 CPU that enables a higher level of performance compared to Arduinos with 8-bit microcontrollers. The Arduino Due has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 MHz clock, a USB OTG capable connection, 2 DAC (digital to analog converters), 2 TWI, a power jack, an SPI header, a JTAG header, and reset and erase buttons. Microcontroller: AT91SAM3X8E Operating Voltage: 3.3V Recommended Input Voltage: 7-12V Min-Max Input Voltage: 6-20V Digital I/O Pins: 54 (of which 12 provide PWM output) Analog Input Pins: 12 Analog Outputs Pins: 2 Total DC Output Current on all I/O lines: 130 mA DC Current for 3.3V Pin: 800 mA DC Current for 5V Pin: 800 mA Flash Memory: 512 KB all available for the user applications SRAM: 96 KB (two banks: 64KB and 32KB) Clock Speed: 84 MHz  

• Type: Automatic, Semi-automatic
• Material: Plastic
• Color: Blue, Green
• Voltage: 7-12 V, 7-12V
• Condition: New, Used
• Power: 20 MA, 40 MA, 60 MA

The UNO is the best board to get started with electronics and coding. If this is your first experience tinkering with the platform, the UNO is the most robust board you can start playing with. The UNO is the most used and documented board of the whole Arduino family.   Arduino/Genuino Uno is a microcontroller board based on the ATmega328P. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.. You can tinker with your UNO without worring too much about doing something wrong, worst case scenario you can replace the chip easily at a reasonable price and start over again.

• Material: Plastic
• Color: Blue
• Voltage: 7-12V
• Condition: New
• Current Type: AC, DC
• Clock Speed: 16 MHz, 18 MHz, 20 MHz
• Architecture: AVR
• Analog Input Pins: 12, 16, 8
• Type: Automatic

• Country of Origin: India
• Size: Standard

The Due is Arduino’s first ARM-based Arduino development board. This board is based on a powerful 32bit CortexM3 ARM microcontroller made programmable through the familiar Arduino IDE. It increases the computing power available to Arduino users keeping the language as compatible as possible so that many programs will be migrated in a matter of minutes! The Arduino Due has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), an 84 MHz clock, a USB-OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button. There are also some cool features like DACs, Audio, DMA , an experimental multi tasking library and more. To compile code for the ARM processor, you’ll need the latest version of the Arduino IDE: v1.5 (After a period of testing and debugging this will replace the 1.0.1 IDE altogether) Because of the limitations of system voltage imposed by the Atmel SAM3X8E, Arduino shields that are based on the 5v models won’t work properly. All the shields that fully implement the Arduino R3 layout are compatible straight away (like the Arduino WiFi shield and Ethernet Shield) but other shields might not be compatible. Be careful when you’re plugging stuff in!

UNO PLUS is a development board compatible with the Arduino UNO R3, an improved & enhanced alternative solution for Arduino UNO R3.   ATMEGA328P-AU AMS1117-3.3 : 3.3V voltage regulator NCP1117ST50T3G : 5V voltage regulator FT232RL : USB to UART convertor Arduino interface compatible with standard Arduino interface with two additional analog inputs A6 (config the CFG), A7 solder pads provided, supports prototype breadboard ICSP interface MICRO USB connector : for uploading program OR serial port debugging Power output header : 3.3V OR 5V, voltage level configured by the onboard power configuration switch, used as power output OR common-grounding with other boards FT232 pins : for burning Bootloader into the microcontroller DC input : 7V ~ 12V Reset button Power indicator Serial port Rx/Tx indicator User LED Power configuration switch : for configuring the operating voltage Bootloader selection switch turn ON : the board will reset when power-up OR other USB devices were detected connecting to the PC turn OFF : the onboard program runs immediately when power-up, and the board will not reset when other USB devices were detected connecting to the PC