Auto Mains Failure Relay Dealers

• Brand Name: Generic
• Voltage: 220V
• Phase: Single Phase
• Usage: Industrial
• Shape: Rectangular
• Color: Black
• Packaging Type: Carton Box
• Manufacturer: ‎C&S
• Model: Ec-RXA-V2

We are one of the most trustworthy AMF Relay Manufacturers and Suppliers in Faridabad. The AMF Relay which we manufacture is made as per the set industry standards using high grade material. The AMF Relay is available in varied specifications to cater to the diverse requirements of the clients. These AMF Relays are widely demanded by the clients for their reliability, compact size and optimum performance. The clients can avail these AMF Relays from us at the most competitive price. Applications Of AMF Relay Control the complete function of D. G. Set and Mains change over auto strart, auto stop, and safety of D. G. setSafety of load against over Volt, Under Volt, Over Frequency, Under Frequency, Over Current, and safety of Engine against High water temp, low lube oil pressure and low fuel cut off In Built Measurement Volt meter for DGVoltmeter for mainsTotal hours run since installationAmmeter for loadFrequency meter for DG PowerFuel level Meter Inbuilt Safety Stop failure warning if stop attempt increase more than 45 secOver Load tripLow Lub Oil Pressure TripUnder Volt tripInstantaneous short circuit tripOver speed tripLow fuel warning at 30%Low fuel level trip at 5% FixOver Volt tripHigh water temperature tripStart failure warning if attempt increase more then set attempt Salient Feature Of Our AMF Relay DSP technologyFlush mountingWide array of timers start delay, stop delay, mains restorations, recoiling; warm-up timer, start/stop timer etcAlphanumeric LCD display with key pad for easy operationRS-232 Communication port for Pc interfacingParameters setting from panel key board Panel cutout 92 x 92mm Dimensions 96 x 96 x 110mm

EC-RXA-V2 is a AUTOMATIC/MANUAL Generator controller module including protection for (STAND BY) GEN~SEl’S. It uses single advanced micro controller chip for an easy and trouble free GEN~SET control. it is cost ef fective solution for AMF controlling system. If mains voltage in any phase fails (either voltage or frequency goes out of the selected range) EC-RXA-V2 initiates an automatic GEN-SET start cycle including load transfer by switching the contactors mounted in the panel. After the mains is restored the load will be automatically removed from GEN-SET and transferred to mains.GEN-SET will stop after a set cool down time. During all cycles, generator is fully monitored and protected against any fault. All the alarm occurring at abnormal GEN-SET conditions are detected and displayed on LCD display and if necessary GEN-SET is stopped and hooter gets activated.   Benefits   9 LEDs, 7 Digital inputs and 6 Potential outputs fordriving of relays on external relay card Last 5 Fault records with date and time stamp Logical interlockfor Mains & DG breakerforfail safe operation Wide array of time circuits for start delay, stop delay, mains restoration, re- cooling etc Full engine safety functions: The unit has LLOP, HOT, Over speed, Start Failure, Stop Failure, Fuel level trip, Emergency stop and Overload tripfunctions. FEATURES Display of 3 Phase Mains Parameters: Voltage and Frequency Display of Generator Parameters: Voltage, Frequency, Speed, Flun Hours Measurement and display of Load current and Instantaneous load in kW 34 Programmable Parameters including settings of voltage, frequency, different delay times Site name and number are programmable

• Usage: Protective
• Brand Name: C&S
• Lead Time: 6-8 weeks
• Theory: AMF Relay
• Port: Mumbai
• Place of Origin: Maharashtra, India
• Protect Feature: Sealed

We are the main supplier of this product.

• Frequency: 50/60Hz
• Model Number/Name: EC2,V1.10
• Brand: C&S Electric
• Digit Display: Single
• Type: Automatic
• Finish: Matt
• Marine Or Industrial: Industrial
• Display: 16 characters/row x 2 rows LCD display with built in controller
• Aux Supply: 7.0 - 35.0 V DC
• Aux Supply Burden: 3 W @24 V DC
• Generator Voltage: 50 to 300V AC (Ph-N)
• Mains Voltage: 50 to 300 V AC (Ph-N)
• Rated Frequency: 50 Hz/60 Hz
• Voltage Measuring Tolerance: +/- 1%
• Frequency Measuring Tolerance: +/- 0.5%
• VBatt Supervision: 9.0 - 35.0 V
• Operating Temperature: - 20 deg C - +70 deg C
• Storage Temperature: - 20 deg C - +75 deg C
• Features: Micro controller technology, Alphanumeric LCD display with keypad for ease of operation.

• Features: Configurable inputs (11), Configurable outputs (8), Fuel usage monitor and low fuel alarms

we are offering amf relay. function: power house amf relay: is a solid state, compact electronics device developed to make amf panel reliable, simple, and easy to operate. it has built in mains voltage sensor, incoming delay timer, starting attempt timer with on delay and off delay, 3 attempt and lock, dg voltage sensors, counters, logic control etc. incoming high voltage supplies are isolated by opto-couplers and out put connections are through electrotechnical relays. the relay does not require any separate power supply. it works on dg set starting battery. application: automation of dg sets. specifications: aux supply :12/24 v dc from dg starting battery sensing mains : 3 phase 4 wire. a) under voltage 170 -200 v. (adjustable) b) single phasing dg : 1 ph. 2 wire. a) starting signal withdrawal at 75 v. (fixed) b) load transfer 190 -210 (adjustable) mains incoming delay : 30 - 60 sec. (adjustable) starting signal a) on time 3-6 sec (adjustable) b) off time 3-6 sec. (adjustable) c) 3 attempt and lock ideal running : 30-60 sec. (adjustable) stop solenoid timer : 30-60 sec. (adjustable) interlockin : logically interlocked isolation a) optical isolation for mains voltage b) optical isolation for dg voltage c) electro-mechnical relays for out put contact ratings : 5 amps terminals : pcb mounted for 2.5 sq mm wire. indications : a) mains incoming voltage (each phase) b) starting attempt on time c) set fail to start d) dg set low voltage e) load on dg f) load on mains g) stop solenoid timer on enclosure : heavy duty sheet steel enclosure finished with powder coated. mounting : panel (245 x 190 mm)

• Brand Name: Hi-Tech
• Model: ECR-19A
• Type: LCD
• Programming Mode Time: 2 Seconds

• Number of Poles: 4 Pole
• Voltage (V): 440 V
• Voltage Type: AC
• Current (Amps): 200A
• Application: Generator
• Payment Terms: T/T (Bank Transfer)

• Features: Micro controller technology, Withstands a dip to 0V of auxiliary supply for 1 second, Alphanumeric LCD display with keypad for easy of operation, Remote starting and stopping facilities
• auxiliary supply: 7 V to 35Vdc

• dimension: 245 x 190 mm

It has built in Mains voltage Sensor, incoming delay timer, starting attempt timer with ON delay and OFF delay, 3 Attempt and lock, DG voltage sensors, counters, logic control etc. Incoming High Voltage supplies are isolated by opto-couplers and out put connections are through electrotechnical relays. The relay does not require any separate power supply. It works on DG set starting battery.

• Brand Name: bps
• Aux Supply: 24 V DC from DG starting battery
• Mains: 3 Phase 4 wire.
• DG: 1 Ph. 2 Wire.
• Mounting: Panel (245 x 190 mm)
• Enclosure: Heavy duty Sheet Steel enclosure finished with Powder coated
• Contact Ratings: 5 Amps
• Interlocking: Logically interlocked
• Application: Automation of DG sets

• Relay Type: Voltage Relay
• Number of Poles: 4 Pole, 3 Pole
• Voltage Type: AC
• Electricity Type: AC
• Socket With Shutter: Yes
• Phase Sequence: Yes
• Features: Durability, Uninterrupted performance, Maximum efficiency

• Color: Black
• Usage: Synchronizing
• Brand Name: CRE
• Location: Pan India

auto mains failure relay, ultrasonic level transmitters

Egen Plus Powerful Amf Relay, outdoor light fittings, vacuum contactors

C&S EC2 AMF RELAY, CRC Urethane Isolation Anti - Corrosion Products

Generator Relay & AMF Panel Relays, Meter Relays