Averaging Pitot Tube Dealers

• Material: Stainless Steel
• Application: Gas Flow Measurement
• Color: Silver
• Feature: Durable
• Finishing: Polished
• Packaging Type: Corrugated Box

We are offering averaging pitot tubes. Averaging pitot tube is a differential pressure producer suitable for liquid, gas and steam flow measurement. It offers simple, low cost installation into pipes and ducts, and high energy savings due to its low unrecovered pressure loss. There are no moving parts or sharp edges to wear, so long term accuracy can be maintained.

averaging pitot tube Averaging Pitot Tube is suitable for clean liquid, gas flow measurement • Accuracy ± 2 % of actual flow rate • Repeatability of measurement ± 0.2 % • Flow rate turndown typically 4:1 • Short upstream and downstream straight pipe lengths • Long term accuracy unaffected by wear • Less pressure loss

Series 10A inline sensors are supplied in threaded Schedule 40 pipe nipples (except for type “k” Copper). The inline sensor is complete with factory fitted probes and is supplied as a complete assembly providing economical installation. Series 10A sensors are supplied with Steel, 316SS, Brass and Type “k” Copper. Line sizes 1/2″ through 3″ are available.

This complete assembly comprises a D.P. Transmitter for 4-20mA analog output & an averaging pitot tube assembly as a primary flow sensing elements.  A most reliable & economical instrument for low measurement of Gas, Liquid & Steam application: Specification * Choice of linear or square root output. * A/D or D/A converter not required as the electronic unit can be directly hooked up with the control system. * Piezo resistive sensor for temperature & pressure compensation. * Programmable engineering units for display

ANNUBAR - DIAMOND BAR (AVERAGING PITOT TUBE) Annubar -Diamond Bar (Averaging Pitot Tube) is an energy saving device used to measure the flow of liquids, gases & steam in pipes, stacks & rectangular ducts. It provides high, long term stability with low permanent pressure loss. The sensor is diamond shaped which controls the separation point at which the boundary layer breaks off as the flow pass through it, resulting in a stable flow coefficient & achieving good accuracy over wide range of flow.

• Line Size: 25 NB – 5000 NB (1” – 200”)

provides economical flow measurement products based on differential pressure principle, suitable to wide range of line size, pressure & temperature applications with service like any liquid, gas or steam. We also provide products for special applications required in the process industries. Apart from the materials mentioned any other material can be supplied on request. Products with IBR NIBR option are available. This is a multi-port velocity averaging device. This is a product among differential pressure producers which has the lowest permanent pressure loss, thus providing maximum energy saving. This is suitable for large pipe diameters as the installation is easy & less expensive.

• Line Size :: 150 NB - 750 NB (6" to 30")

We are the leading manufacturer, exporter and supplier of Averaging Pitot Tube (Annubar). P.S Instruments Averaging pitot tubes use multiple sensing ports to continually average the flow profile and generate a differential pressure that represents the mean flow rate across the pipeline. Averaging Pitot Tubes offer an accurate measurement and low permanent pressure loss The Pitot tube produces a Differential pressure (DP) signal proportional to the square of the flow rate in accordance with Bernoulli's theorem. This signal has two components, the high pressure (HP) and the low pressure (LP). DP= HP-LP When the fluid impacts the sensor, it creates a high pressure zone, greater than pipe static pressure, in front of the sensor. As the fluid moves past the sensor, it accelerates and a low pressure zone is created to the sides and rear of the senor. Multiple sensing ports are positioned in the high and low pressure zones and an averaged differential pressure is produced. The DP increases proportionally to the square of the velocity of the fluid. By averaging the flow velocity across the pipe, averaging pitot tubes are more tolerant of errors bends and valves upstream of the meter

• Size: 25 NB – 5000 NB (1” – 200”)

STAR-MECH provides economical flow measurement products based on differential pressure principle, suitable to wide range of line size, pressure & temperature applications with service like any liquid, gas or steam. We also provide products for special applications required in the process industries.

• Size: 12- 4000 mm
• Standards: ASME MFC-3M,BS-1042 And ISO-5167 etc
• Material of Construction: Carbon Steel,SS304,SS316,SS304L,SS316L as Standard.Hastelloy C,Monel,Inconel
• End Connection Type: Buttweld, Flanged
• Accuracy: Within +/- 1 %
• Optional Testing: PMI,Hydrotest,Radiography,Calibration,NACE,PWHT,IBR,Oxygen Cleaning,Die Penetration Test

Unique profile shape enables high flow rate turn down, Dual averaging for better accuracy, Suitable for Liquid, gas and steam flow measurement, Repeatability of measurement ± 0.1 %, Short upstream and downstream straight pipe lengths,Long term accuracy unaffected by wear. Averaging pitot tubes are generally used for large line sizes or ducts where other primary devices become relatively expensive. Averaging Pitot tube comprises of following components:

• Size: 150 NB - 750 NB (6" to 30")

The pitot tube produces a Differential pressure (DP) signal proportional to the square of the flow rate in accordance with Bernoulli's theorem. This signal has two components, the high pressure (HP) and the low pressure (LP).When the fluid impacts the sensor, it creates a high pressure zone, greater than pipe static pressure, in front of the sensor. As the fluid moves past the sensor, it accelerates and a low pressure zone is created to the sides and rear of the senor. Multiple sensing ports are positioned in the high and low pressure zones and an averaged differential pressure is produced. The DP increases proportionally to the square of the velocity of the fluid.

Averaging Pitot Tube, flow indicator totalizer, Signal Isolators

Averaging Pitot Tubes, fice plates & assemblies, meter run sections

Averaging Pitot Tube with DP Transmitter

Averaging Pitot Tubes, Pressure Switches, Differential Pressure Gauges

Averaging Pitot Tubes...  Averaging Pitot tubes are basically used to detect flow velocity of fluids, gasses, steam, steam water and absolutely all those medias which atmost with 3-5ppm of solids as the max size..

Averaging Pitot Tube, Zone Leak Monitor Panels, Distance Read Monitor Panels

Averaging Pitot Tube, pneumatic tube, evaporator tube