Bacteriological Incubator
Get Price Quote
1 Piece (MOQ)
SIS – 1302 Temperature up to 70°C. Heating elements are placed in ribs at the bottom and sides. Double walled inside Stainless Steel. The door has synthetic rubber gasket. Outside Mild Steel painted in epoxy powder coating / stainless steel with perforated adjustable shelves, two indicators and on/off switch. To work on 220/230 volts A.C. With OR without one number Air circulating Fan & Digital Temperature Controller Cum Indicator. Specially Designed to maintain 37°C temp. Size inside chamber W X D X H 300 X 300 X 300 mm (12”X12”X12”)1 355 X 355 X 355 mm (14”X14”X14”)1 450 X 450 X 450 mm (18”X18”X18”)2 450 X 450 X 600 mm (18”X18”X24”)2 600 X 600 X 600 mm (24”X24”X24”)3 600 X 600 X 900 mm (24”X24”X36”)3 OR ANY SPECIAL SIZE.
Bacteriological Incubator
15,500 Per Nos
Our Eco Friendly BOD Incubator is made by using best quality material. BOD Incubator (Eco Friendly is specially designed for incubation of Biochemical Oxygen demand on water and sewage; this can be used as environmental study and growth chamber by incorporating lighting and humidification system. Triple walled inside anodized Aluminum/Steel outside mild steel fitted with air circulating fans. Full view inner glass door with magnetic gasket allows inspection of samples without disturbing the temperature of cabinet. Range 5oC to 60oC with an accuracy of ± 0.5oC by Solid State Digital Temperature Indicator cum controller, Refrigeration is done by ISI marked Compressor/Condensing Units CFC free & R-134 an eco friendly refrigerant and heating by air Heaters. Control panel has separate heating and cooling indicator lamps; temperature set allows the user to select any desired temperature. Voltmeter is provided at the panel to check the incoming voltage. Additional Facilities at an Extra Cost Lighting system by interior illumination with 3 fluorescent tubes of 60 cm. (20 Watts) placed vertically along back wall Temp. 10oC to 60oC Timer with reverse 0 - 24 hours for regulating hours of light and darkness including fitting at the top of incubator. For incubation in CO2 air mixtures provided with nozzle f fitted at the side of Control panel for admitting CO2 or CO2 air mixture chamber Humidity System Steam Type Slow Speed Shaking Platform Voltage Stabilizer Automatic
Best Deals from Bacteriological Incubator
Bacteriological Incubator
Get Price Quote
Bacteriological Incubator
22,000 Per Piece
1 Piece (MOQ)
Our extensive range of B.O.D. Incubators has been designed especially for biological Oxygen demand determination & other applications like general incubators, Serum studies & Enzyme assays test. We can also customize the B.O.D. Incubators to suit the varied requirement of the clients with in stipulated time frame. Technical Specifications : Double walled cabinet mounted on castor wheels Inner chamber made of S.S.304 & Outer chamber made of M. S. Powder coated Full Length inner Glass door permit inspection of with out disturbing the Temp. Temp. Range 5’C to 60’C Temp. Controlled by solid State Digital controllers housing all the control with PT-100 sensor illumination light are provided for viewing. CFC Free hermetically sealed compressor provide temp. For below ambient condition. Air circulation fan for maintain Temp. Uniformity through out the chamber. Flush fitting insulated double walled door The Chamber is provided with modular removable shelves made of S. S. For complete flexibility in use To work on 230 volts 50 H2. Safety Features : Built in Temp Deviation Safety thermostat for overshoot Temp. Cut off system. HRC Fuses for compressor heater & mains Time daily circuit for safety of compressor. Special Care : A suitable K V. A. Servo stabilizer is strongly recommended. This B.O.D. incubator is available in below sizes: 3 45 x 45 x 45 Cm. 90 2 6 50 x 50 x 70 Cm. 175 2 10 55 x 55 x 90 Cm 285 3 12 60 x 60 x 90 Cm 340 3 16 70 x 70 x 95 Cm 450 4
Bacteriological Incubator
12,000 - 42,496 Per Piece
1 Piece (MOQ)
Bacteriological Incubator
4,200 Per piece
1 Piece (MOQ)
Standard double wall fabrication. Inner chamber made out of richly anodized aluminium or highly polished stainless steel sheet and outer made out of thick mild steel sheet finished in white stoving enamel/powder coated paint with mat finished colour combinations. Double wall door with double glass window for observation in the chamber. Temperature range 5° C above ambient to 80° C ± 1° C controlled by a thermostat. The equipment is workable on 220 V Ac 50 Hz single phase. OPTIONAL: Air circulating fan. Timer 0-24 hours. Digital temp. Indicator-cum-Controller. Microprocessor PID LCD Display Temp.& Time Controller with alarm system.
Bacteriological Incubator
4,500 Per Piece
1 Piece (MOQ)
specification :- made of MS ( mild steel ) with powder coated , solid door with lock . Note :- outer can be SS if required .Size :- 12 x 12 x 12 inch - 28 Ltr. , 14 x 14 x 14 inch - 45 Ltr, 18 x 18 x 18 inch - 95 Ltr . , 24 x 28 x 18 inch - 125 Ltr. , 36 x 24 x 18 inch - 252 Ltr. , 36 x 24 x 24 - 336 Ltr, 36 x 36 x 36 - 480 Ltr. Optional :- 1. air circulating fan2. Digital timer - 0 -24 h 3. Microprocessor based PID controller 0.1 c accuracy
AMBINOVA BACTERIOLOGICAL GENERAL INCUBATOR(FORCED)
Get Price Quote
1 piece (MOQ)
microprocessor based temperature control height adjustable shelves 2 point door seal temperature range amb +5 to 100°c accuracy 0.5 @ 37°c uniformity 0.5 @ 37°c
Digital Bacteriological Incubator
Get Price Quote
20 Piece (MOQ)
memmert bacteriological incubator
Get Price Quote
Bacteriological Incubators are sturdy double walled units. Note :- We have different Diameters / Capacity as well in the product
Bacteriological Incubator
Get Price Quote
1 Piece (MOQ)
Bacteriological Incubator
Get Price Quote
Double walled Chamber Inner constructed out of Stainless Steel and outer Mild Steel Powder coated/ epoxy painted in beautiful colors. 2.5o thick glass wool insulation, temperature controlled by Microprocessor based digital temperature controller cum indicator with suitable PT100 Sensor. Working temperature +5o above ambient to 80oC with an accuracy of ±1oC. Air ventilation provided on two sides. With option of dynamically balanced air circulation fan to maintain even heat within the chamber. The control panel has Power On /Off switch with indicator lamp for heating and Rotary selector switch. The equipment works on single phase power 240V AC 50 Hz. The equipment is supplied with adjustable wire mesh trays as standard and Perforated SS trays as optional.Optional : Safety blind Controller Air Circulating Fan Stainless Steel Perforated Trays Digital Timer Chamber Validation/ calibration Imported Microprocessor based PID Controller Digital Microprocessor based controller with RS-232 & PC inter phase Any other sizes can be supplied on demand Higher temperature accuracy models can be supplied on demand Fully Stainless steel model available on demand.
Bacteriological Incubator
Get Price Quote
1 Piece (MOQ)
Bacteriological Incubator
Get Price Quote
1 Piece (MOQ)
“TEMPO” make bacteriological incubator are specially designed for research laboratories, engineering lab, pharmaceutical lab, cosmetic industry, chemical lab, clinical lab, microbiological determination, pharmaceutical stability assays, food processing, QC, etc.Standard ModelsInside SS 304 with mirror polish & outside mild steel duly powder coated.GMP ModelsInside SS 316 with mirror polish & outside stainless steel 304 with the dull buff finish.Construction“TEMPO” make bacteriological incubator are made up of double walled construction. Full view inner acrylic door & front door with gasket & lock. The motorized blower is fitted on the backside for uniform temperature (only forced air circulation model). Insulation is provided by means of suitable PUF insulation. The unit is provided with adjustable stainless steel rod trays.Technical Specification Controlling System : Microprocessor based autotune PID temperature controller with a dual display of the value and process value for precise control of temperature with PT 100 sensor is used. Air Circulation (only forced air circulation) : The motorized blower at the backside of the chamber develops a unique airflow system which ensures maximum uniform temperature distribution inside the chamber. A unique airflow ensures quick recovery after the doors are opened. Heating System : Forced air circulation model – high quality SS tubular heaters are used for better heating conditions. Natural convection model – the heating elements are made from the best quality Kanthal/Nichrome wire for refractory purpose. FeaturesFull view observation acrylic door with a gasket to observe the sample inside the chamber. A specially designed stainless steel rod trays ensure uniform temperature distribution.Safety FeaturesSafety standby thermostat to cut off heater supply in case of overshoot of temperature.Optional Features CFR 21 part 11 compliance software for data logger Data logger Data scanner complete with sensor Safety digital temperature controller Timer Motor Speed Controller
Pro Plus Bacteriological Incubator
Get Price Quote
1 Piece (MOQ)
Features: Designed for critical laboratory applications for controlled temperature range upto 70°C with an accuracy of ± 0.5°C. Integrated built in see thru toughned glass window in double walled door. Forced convection model accounts for temperature uniformity and higher control accuracy. Auto cut-off of blower and heaters on door open position. Seamless rounded back edges of internal work chamber and semicircular arcs at corners insures easy clean-up and uniformities. Temperature Range : Upto 70°C Temperature Accuracy : ± 0.5°C Fitted with MULTICOLOUR TOUCHSCREEN HMI WITH PROGRAMMABLE GRAPHICAL DISPLAY LOGIC CONTROL (PLC). These units are featured with Microprocessor Based AUTOMATIC DIGITAL TEMPERATURE INDICATOR-CUM-CONTROLLER with an in-built DIGITAL TIMER to control the temperature. Once the unit is switched “ON” heating starts automatically and once the set/desired value is achieved the in-built AUTOMATIC DIGITAL MINUTE TIMER starts automatically. Once this set time period is over the heaters are switched “OFF” automatically and the unit sounds a BUZZER, thus alerting the user that process is complete. Inner chamber and adjustable trays are made of Stainless Steel (SS-304 grade). Outer body made of CRC Sheet duly powder coated. Horizontal on face cross flow air circulation accounts for tighter uniformities and accuracy. Specially designed silicon door gaskets accounts for minimal heat dissipation and leakages thus accounts in electrical energy servings. To work on 220/230V AV, 50/60 Hz supply.
Digital Bacteriological Incubator
Get Price Quote
We conduct diverse quality tests in order to ensure that our entire range is free from defects. We are a quality-conscious firm and make use of high-grade packaging material for wrapping products. Also, we have installed modern packaging machines that assist us in meeting tailored packaging requirements.
Bacteriological Incubator
Get Price Quote
1 Piece (MOQ)
Temp. range from room to 90ºC. Double door, with glass window. Inner chamber of anodized aluminum/stainless steel sheet. Optional Air Circulating fan 3600 Timer 0-24 hours 3360 Digital temp. Indicator-cum-Controller 7900 Microprocessor PID digital temp. Indicator-cum-Controller with timer 14500 Digital temp. Indicator 4000
Bacteriological Incubator
Get Price Quote
FEATURES & SPECIFICATIONS: Double-wall construction with Inner chamber made of Stainless Steel – 304 Grade Exterior of CRCA steel with powder coat finish. High density glass wool insulation between walls to prevent heat dissipation. Heating elements are made of high grade Nichrome wire and placed at the bottom, of the unit. A transparent full length Acrylic inner door is provided to have a clear inner view of the samples Temperature Range: 5°C above ambient to 60°C. Temperature controlled by Capillary Thermostat with +/- 2°C Accuracy. Gravity convection & Shelves are made of Galvanized wire mesh. Operates on 230 Volts AC Single phase 50 Hz.
Bacteriological Incubator
40,000 - 45,000 Per Piece
1 Piece (MOQ)
Post Free Ad
4.0
