Bearing Fitting Tool Kit Dealers

• Country of Origin: India
• Type: Bearing Fitting Tool Kit
• Material: UHMW-Pe
• Certification: ISO
• Application: Fitting Use
• Color: Green Rings
• Feature: Highly Reliable
• Condition: New
• Coating: Power Coated
• Warranty: 1yrs
• Kit type: Box type
• Brand Name: ANTIMU
• Weight: 8 kgs
• projecting shaft length: 200 mm (8
• weighs: 6 kgs.

We are offering bearing fitting tool kit. Gm bearing fitting tool kits are specially matched to meet tool storage needs of professional mechanics and service technicians. These very carefully designed set structure offer both an effective means of tool storage and a showcase appearance. Built to last, these kits are a wise investment because they hold their value. Gm bearing fitting tool kits comprise impact sleeves, 36 impact rings made out of super tough light weight impact resistant ultra high molecular weight impact resistant polyethylene rings made to fit diverse combination of impact rings and impact sleeves.

• Type: Bearing Fitting Tool Kit
• Country of Origin: India
• Brand Name: Antimu
• Weight: appx 6 kg
• Product name: Bearing Fitting Tool Kit
• Capacity: 10 mm to 55 mm before diameter bearings

Bearing fitting tool kit model am 100 mark iii features a vital tool kit for fast, safe & accurate mounting of bearings the sleeve impact surfaces and rings are made of super tough, light weight, impact resistant, ultra high molecular weight (uhmw-pe) polyethylene material. each sleeve can accommodate 200 mm (8") projecting shaft length. the mass including,case weighs about 6 kgs. Inclusive of a special mallet. the entire tool is packaged in a special carrying case. advantages extremely light kit makes it very portable and convenient to handle. allows one to mount 200 different sizes of bearings and other components. ensures ready availability of components for mounting the bearings when required. even distribution of mounting force ensures accurate alignment and damage free mounting. no chance of dust or dirt being injected in the bearing.

• Material: Mild Steel
• Condition: New
• Application: Bearing Puller
• Feature: Completely Integrated, Highly Reliable
• Country of Origin: India
• Operation Mode: Manual
• Finishing: Color Coated

• Type: Electrical
• Condition: New
• Power Supply: Three Phase
• Voltage: 440 VAC
• Absorbed Power: 5 kva
• Capacity: 10 mm to 55 mm befor

Srink fitting BearingA three turn copper helical coil is used to heat the Bearing inner dia up to 240 ºC in 3 seconds to expand the inner diameter and then the inner bearing is inserted to form the completed part.Srink fitting Gear BoreA four-turn copper helical internal coil is used to heat the gear bore. The coil is inserted into the gear bore and power is applied for 90 seconds to reach the required 204 ºCand expand the gear boreSrink fitting camshaft gearHeating a camshaft gear with a bore size of 1.630" to shrink fit over a steel shaft that has a diameter of 1.632". A temperature of 260 c is required for the gear to expand 0.002" in order to slip over the shaftSrink fitting connecting rodInduction heating provides more accurate control of heat vs a flame burner, it heats only the knuckle, not the whole part, it prevents discoloring due to lower temperature used and increases productivity due to repeatability & ease of operation. A foot pedal & timer is used.Benefits Accurate control of heat Incrase productivity Easy Oparation due to timer and food pedal

TIK is the right equipment for mounting small size bearings. The Tool Kit is specially designed to avoid damage to bearing rings while being mounted. The correct combination of Impact Ring and Impact Sleeve will ensure that the mounting forces are evenly distributed over the bearing rings and hence the risk of misalignment and damage to the bearing is eliminated. A nylon - head hammer must be used for impact blows.

• Power Supply: Three Phase
• Voltage: 440 VAC
• Absorbed Power: 5 kva

Srink fitting Bearing A three turn copper helical coil is used to heat the Bearing inner dia up to 240 ºC in 3 seconds to expand the inner diameter and then the inner bearing is inserted to form the completed part. Srink fitting Gear Bore A four-turn copper helical internal coil is used to heat the gear bore. The coil is inserted into the gear bore and power is applied for 90 seconds to reach the required 204 ºCand expand the gear bore Srink fitting camshaft gear Heating a camshaft gear with a bore size of 1.630" to shrink fit over a steel shaft that has a diameter of 1.632". A temperature of 260 c is required for the gear to expand 0.002" in order to slip over the shaft Srink fitting connecting rod Induction heating provides more accurate control of heat vs a flame burner, it heats only the knuckle, not the whole part, it prevents discoloring due to lower temperature used and increases productivity due to repeatability & ease of operation. A foot pedal & timer is used.

A vital Tool Kit for Fast, Safe & Accurate Mounting of Bearings • Consists of 3 Aluminium Alloy sleeves and 33 impact rings. The sleeve impact surfaces and rings are made of Super tough, light weight, impact resistant, ultra high molecular weight (UHMW-Pe) polyethylene material. • Allows one to mount more than 200 types & sizes of Bearings and other components between a bore diameter of 10 mm to 50mm with precision & accuracy. • Each sleeve can accommodate 200 mm (8") projecting shaft length. • The mass including, case weighs about 6 kgs. inclusive of a special mallet. • The entire tool is packaged in a special carrying case. Bearing Fitting Tool kit » Advantages • Extremely light kit makes it very portable and convenient to handle. • Ensures ready availability of components for mounting the Bearings when required. • Even distribution of mounting force ensures accurate alignment and damage free mounting. • No chance of dust or dirt being injected in the Bearing.

Features UNIQUE Bearing Fitting Tool Kit Comprises of 36 or 33 Impact Rings made out of Super Tough Light Weight Impact Resistant Ultra High Molecular Polyethylene Rings Made to fit diverse combination of Impact rings and Impact Sleeves, 3 numbers of Aluminium Impact Sleeve and A Nylon Mallet  in a suitable carrying case. With the above assembly one can mount over 200 types and sizes from 10 mm to 50 mm of Bearings with precision and accuracy. Each Sleeve can accommodate about 200 mm length projecting shaft. Selection Chart is provided in each kit to identify easy mounting.   The kit contains  36 or 33 (as required) impact rings of different sizes as perstandard sizes of bearings, 03 impact sleeves and a dead-blow hammerpacket in lightweight carrying case. Impact rings are marked for clear visual identification of the ring’ssize and easy selection. Impact rings and sleeves are made of high impact resistant materialfor longevity. Dead-blow hammer is of nylon double side head Carry Case

• Application: Tools Kit
• Material: Stainless Steel
• Weight: 3-5 Kg
• Packaging: Box
• Finish: Polished

Precision Bearing Fitting Tool kits are specially matched to meet tool storage needs of professional mechanics and service technicians. These very carefully designed set structure offer both an effective means of tool storage and a showcase appearance. Built to last, these kits are a wise investment because they hold their value. Precision Bearing Fitting Tool kits comprise Impact Sleeves, 36 Impact rings made out of super tough light weight impact resistant Ultra High Molecular Weight impact resistant Polyethylene rings made to fit diverse combination of impact rings and impact sleeves.

Precision Bearing Fitting Tool kits are specially matched to meet tool storage needs of professional mechanics and service technicians. These very carefully designed set structure offer both an effective means of tool storage and a showcase appearance. Built to last, these kits are a wise investment because they hold their value. Precision Bearing Fitting Tool kits comprise Impact Sleeves, 36 Impact rings made out of super tough light weight impact resistant Ultra High Molecular Weight impact resistant Polyethylene rings made to fit diverse combination of impact rings and impact sleeves.With the above assembly one can mount over 200 types and sizes from 10mm to 50mm of bearings with precision and accuracy. Each sleeve can accommodate about 200 mm length projecting shaft. The Kit comes in suitable carrying steel case. Selection chart is provided in each kit to identify easy mounting. br> Specifications: Ensures accurate alignment and even distribution of mounting forces. No chance of dust or dirt being injected into the bearings. Easy mounting ensuring troube free performance. Longer life of bearings resulting to huge savings.

The kit is an excellent long term investment for your maintenance department to mount bearings safety, correctly and in min. of time.

• Application: Industrial
• Brand Name: SKF
• Model Number: TMFT 36
• Weight: 4.4 kg (including carrying case)
• Packaging: Case
• Number of sleeves: 3
• Number of rings: 36
• Dimensions: 530 x 110 x 360 mm

• Type: Bearing Fitting Tool Kit
• Material: Stainless Steel
• Warranty: 1 Year
• Model Number: TMFT 36
• Brand Name: SKF
• Application: Automobile Industry
• Case Size: 530x110x360mm

Helps prevent premature bearing failures SKF bearing fitting tool kit TMFT 24 TMFT 24 SKF bearing fitting tool kit TMFT 36 TMFT 36 Poor fitting, usually using brute force, accounts for 16% of premature bearing failures. SKF Bearing Fitting Tool Kits are designed for quick and precise mounting of bearings, while minimising the risk of bearing damage. The right combination of impact ring and sleeve allows effective transmission of mounting force to the bearing ring with the interference fit, minimising the risk of damaging the bearing’s raceways or rolling elements. In addition to mounting bearings, the TMFT series are also suitable for mounting other components such as bushings, seals and pulleys. The TMFT 36 kit contains 36 impact rings and the TMFT 24 contains 24 rings. Both kits have 3 impact sleeves and a dead-blow hammer packed in a lightweight carrying case. The TMFT 24 facilitates the mounting of different bearings with bore diameters from 15–45 mm The TMFT 36 facilitates the mounting of different bearings with bore diameters

• BEARING FITTING TOOL KIT: 5,0000-00

BEARING FITTING TOOL KIT  SPECIFICATION : The tool kit shall comprise of Impact Rings, Impact Sleeves and a Dead-Blow hammer along with suitable carrying case which facilitates the mounting of different bearings with bore diameters from 10#55 mm. Impact rings should be marked for clear visual identification of the ring's size and easy selection. Impact rings and sleeves should be of high-impact resistant material for longevity The dead-blow hammer shall be of nylon double-side head to prevent damaging the components 1. Impact rings: Bore diameter: 10-55 mm(min-max) Approximately Outer diameter: 26-120 mm(min-max) Approximately  2. Sleeves: Bore diameter : 19,38,58 mm Approximately Outer diameter: 25,45,65 mm Approximately Maximum shaft length-225mm Approximately 3. No.of impact rings: 36 nos Approximately  4. No.of sleeves: Minimum 3  5. Hammer: Nylon double-side head  6.Wieght of the kit: Not more than 5 kg All the items to be supplied in a sturdy box.  The vendor should submit the product leaflet/catalogue and model no. of the offered Bearing tFitting Tool Kit along with the offer. QTY-------------10 NOS

bearing fitting tool kit, Skf Bearing, Power Transmission Tools, Sprockets