Bifurcated Fan Dealers

• Brand Name: ENVIRO TECH INDUSTRIAL PRODUCTS

Bifurcated Axial Flow Fan These Bifurcated Axial Flow Fan is recommended for high volume, low resistance systems. The fan can be installed at any angle in a duct line with its motor compartment isolated from fumes. For horizontal or near horizontal positions a drain plug can be fitted at the lowest part of the casing. Bifurcated Axial Flow Fans are direct driven axial fans where the motor is encased in a metal box to isolate it from the airflow. Features: Energy efficient Sturdy construction Affordable Type:- BF - Bifurcated Axial Flow Fan Wheel Diameter : 500mm - 1000mm PERFORMANCE : 1250 -73000 CMH upto 40MM WG SP, MOUNTING :In line duct and or wall mounting. APPLICATION :These fans are suitable for handling hot, explosive, corrosive and inflammable gases. Motor remain outside the air streem.

• Fan Blades: Axial Flow Fan Foot Mounted
• Axial Fans: Industrial Tube Axial Fan

Bifurcator Fan We offer to the customers a wide range of Bifurcator Fans which have been manufactured using the best technology available in the market and they have been priced at very reasonable rates in the market and have a very sturdy make. These products are used for removing the unwanted gases, fumes from the place and provide ambient air. These products offer a high performance to the customers and they offer a non-corrosive performance to the customers. Features � � Reliable � High performance � Sturdy

We offer bifurcated axial flow fan. Features: dimensionally accurate robust design easy maintenance product details: the process air is generally ducted at both ends of fans and travels without strict king motor the performance range is from 1000-150000 cmh on air volume, at static pressure up to 30 mm wg

• Type: Bifurcated Fans
• Brand Name: National Enviro
• Place Of Origin: Chennai  
• Features: Robust construction,Smooth functioning,Unique designs,Easy installation,Precision engineered
• Usage: In various industries
• Quality: Gives high performance

Our range of Bifurcated Fans is uniquely designed in compliance with the International standard. High quality raw material is used in its production. Because of its attributes, it is highly sought after in various industries and among customers having different demands. It gives high performance at a very low maintenance cost. We offer the most advanced range of Bifurcated Fans with the help of our R & D activities. Features : Robust construction Smooth functioning Unique designs Easy installation Precision engineered

Suvidha airflow manufactures a wide range of high quality bifurcated fan, in addition to our range of standard designs we have the ability to design and manufacture industrial fans to comfort customer application requerements, bifurcated fan are designed for use in the heatinh, ventilation and building service markets.

Bifurcated fans are direct driven axial fans where the motor is encased in a metal box to isolate it from the airflow. This makes bifurcated fans ideal for exhausting or recirculating fumes, gases and hot air up to temperatures of 200°C in standard form or 300°C for our high temperature bifurcated range. The motor must have access to ambient air. The fans have non-overloading characteristics. R.K.Engg. manufacture two types of bifurcated fan, spun bifurcated and fabricated bifurcated. The type of bifurcated fan refers to the process used in it's manufacture, this does not affect the fan design or performance but determines the sizes available and the materials from which the fan can be manufactured.

• Voltage: 220V
• Frequency: 50 Hz
• Power: 0-25 Kw
• Driven Type: Electric
• Mounting: Ground Mounted
• Surface Finishing: Polished
• Size: 19″ to 75″

SYMBIOSIS Bifurcated Fans are available from sizes 19″ to 75″. These fans are used to handle hazardous air, where motors are kept outside the air stream.

• Size: Bifurcated Fans offer a range of diameter sizes: 310,450, 610, 750 & 910 mm (Higher size can be supply on special case).

Mittal Bifurcated Fans the high efficiency direct-driven fan with adjustable pitch impeller specially designed that can handle hostile environments. The fans designed with split airway and the motor protected from the handled air by having its own compartments. With fan motor isolated from the main air stream, the Bifurcated fan can handle a wide variety of saturated and, dust-laden atmospheres, heated air, corrosive fumes and hot gases with no detrimental effect to the motor.Standard fans can handle elevated air temperatures of up to 150 Deg C in the duct system whilst the motors operate at a relatively lower ambient temperature within the motor compartment.

» Bifurcated Fans specially designed for handling hot, corrosive gases. The drive direct / vee belt is totally isolated form gas stream  » Applications: Chemical, fertilizer, paper plants, etc.   Accesories:  » SILENCER: For applications requiring quiet operation, customs built attenuation packages can be provided on the fan inlet or outlet. attenuators are aerodynamically and are designed to significantly reduce noise while adding only minor resistance to air flow. Variable Inlet Vane: For frequent continuous volume control, a variable inlet vane can be provided. Variable inlet vanes are available for each specific fan size and are bolted to the fan's flanged inlet. The vane action during dampering works to spin the air in the direction of the wheel rotation this resulting in lower power consumption. Vane mechanism is outside of the air stream and is controlled buy a single vane lever. Variable inlet vanes can be set up for manual or automatic operation. The variable inlet vane's inlet is flanged and drilled to accept ductwork or and inlet bell as the system requires. Bird Guard: Safety screening can be provided for installation in the fan inlet, fan outlet, cone or belt. Spark-Resistant Construction: Belt Drive / Direct Drive with Spark-Resistant Construction are available. Inlet Bell: For systems with not ductwork on the fan inlet, it is advantageous to install an inlet bell is a torosoidal shape to avoid inlet losses. The inlet bell is a torosoidal shape to provide a smooth entrance to the fan. Inlet bell are flanged and drilled to mate up with the fan's flanged inlet. Inlet/Outlet Cone: Transition pieces, called cones, can be provided for both the inlet and outlet. Cones are provided to adapt from the fan diameter to the adjacent ductwork diameter. Cones are flanged on both ends and drilled to mate up with fan's flanged. Cones are available with an access door if required. Outlet cones can be utilized to affect performance and transform velocity pressure into static pressure. Companion Flanges: For ease of installation of adjacent ductwork, companion flanges can be provided. Flanges are rolled angle rings, drilled to match the fans inlet or outlet flanges.   Details required for Quotation:    » Application  » Gas to be handle  » Capacity (M3/Hr Or CFM)  » Pressure (inch WG Or mm WG)  » Working Temperature (°F Or °C)  » Type of Drive

This type of fans is available only in direct drive arrangement and used in handling hot, hazardous and corrosive air/fumes.This is a distinguished Axial Flow Fan in which the motor is bifurcated from the hot, hazardous and corrosive nature of air.

We are offering best quality Bifurcated Axial Flow Fan that are apt for exhausting or recirculation of fumes, hot air and gases. The Bifurcated Axial Flow Fan offered by us is highly in demand in the market. Moreover, it can be availed at the most economical prices. Type: bf - bifurcated axial flow fan wheel diameter : 400mm - 1000mmperformance : 1250 -73000 cmh upto 40mm wg sp,mounting :in line duct and or wall mounting. application :these fans are suitable for handling hot, explosive, corrosive and inflammable gases. Motor remain outside the air streem.

The Bifurcated fans having cast Aluminum alloy impeller, aero foil section blade with MS Casing. This fan is mostly placed to exhaust or supply the air of corrosive nature or hazardous for the motor. In this the motor is not the stream of air, this remain protected from the particles available in the air.

DMV is one of the leading names in the field of manufacturing and exporting Bifurcated Fan all over the world.  The size of the fan is 800mm to 1200mm with the flow rate of 1,00, 000 CMH. These fans are made up of aluminum alloys that throw the hazardous particles from the air and give a healthy clear. It is widely noted for its high tensile strength.

  Wheel Diameter- 500 mm – 1000 mm. Performance- 1250 – 73000 CMH upto 40 MM WG SP Mounting- Inline Duct and or Wall mounting. Application- These fans are suitable for handling hot, explosive, corrosive and inflammable gases. Motor is enclosed to prevent direct contact with air.