bitumen flashing tape
300 - 350 Per SQM
10 ROLL (MOQ)
Bitumen Based Flashing Tapes / Strip are cold applied self- adhesive tapes with one side bitumen adhesive protected by release film and other side is re-enforced aluminium foil. Aluminium surfaced self adhesive sealing bitumen strip which bonds instantly to provide a permanent watertight seal in all climates. Flashing tape is easily applied using hand pressure and steam roller, with no requirement for special equipment for cutting, forming or fixing. FEATURES : Superior high temperature performance characteristics Quick and easy application Bonds to a wide range of building materials Cost effective method of flashing, sealing and repair Provides lasting protection in all climates Safe in application, storage and transport USAGE : Flash Tape is used for flashing, sealing and repair against ingress of water for mobile homes, small commercial roofs, residential porches and dormers, from building, roof and gutter patching and on profile sheets. It can also be used as flashing on up stands APPLICATION INSTRUCTION : The application temperature should be between 5°C to 55°C. Application procedure may vary slightly depending upon site condition. The general recommended guideline for the application of the self adhesive waterproofing system is as follows: SURFACE PREPARATION : Surface must be smooth, clean, and free from oil/grease and defects. Gaps, deep hallows and depression greater than 3mm should be filled with an appropriate filler For improved adhesion on porous or uneven surfaces, apply Swastik Oil Base Primer. Using a dampened brush, apply Swastik Oil Base Primer Do not leave the Swastik Oil Base Primer for more than 24 hrs. Prime only the area which will be covered by the membrane in a particular working day Surfaces such as textured brick may require two coats, apply the second coat when the first coat has dried METHOD OF APPLICATION : Unroll only the required length and cut the pieces to the desired shapes and size. Place the pieces of membrane on the area to be covered and check whether they match profile of the marked substrate. Peel off the release film from the self adhesive side and start unrolling the membrane and press it to the surface. Smoothen the membrane from the center to the edges with a wooden press in order to remove any entrapped air. Further more on iron roller can be used for rolling on top of the applied membrane to ensure a proper and strong adhesion of the bitumen compound with the base surface ensure a minimum of 50mm overlap. PACKAGING : Roll Length : 10 Meter Roll Width : 50mm,100mm,150mm,200mm (2”Inch, 4”Inch, 6”Inch & 1 Meter Thickness : 1.2mm, 1.5mm. STORAGE & SHELF LIFE : Stored under cover, out of direct sunlight and protect from extreme temperature. In tropical climates the product must be stored in an air-condition environment. Shelf life is up to 12months when stored as per recommended storage condition. HEALTH & SAFETY : FLASH TAPE contain sticky compound and can stick to human skin. In such cases use a soft cloth dipped in a suitable cleaner to remove the membrane.
0.0
Website
bitumen flashing tape
260 - 690 Per Per roll
1 Piece (MOQ)
Best Deals from Bitumen Tape
Bitumen Adhesive Tape
385 Per Piece
30 Piece (MOQ)
Black Bitumen Pipe Wrapping Tape
185 Per Roll
10 Roll (MOQ)
PypKote Bitumen based Pipe Coating Tapes
150 Per Square Meter
0.0
View Profile
bitumen flashing tape
300 Per unit
0.0
View Profile
TARCO BITUMEN TAPE
350 Per Roll
5 Roll (MOQ)
0.0
View Profile
Super Flash Strip Tape
Get Price Quote
bitumen flashing tape
Get Price Quote
Strong industrial base along with a wide area network, we deliver the range in the stipulated time span. We have divided our infrastructure into different units including packaging unit wherein we pack our offerings meticulously to circumvent loss during transit.
0.0
View Profile
Bitumen aluminium tape
150 - 400 Per Roll
100 Roll (MOQ)
WELCHEM 0131 we are today is leading manufacturer of India high technology adhesive tape. Bitumen aluminium tape is shelf- adhesive waterproof, weatherproof and good temperature resistant. This tape upper side aluminium foil film and lower side modified bitumen and rubber apply best sealing for roof long life. Bitumen aluminium tape widely used in roofing of the building, surface crack, RV repair, metal roofing gutters and downpipes, roof patching, refrigeration, air conditioners etc. PORDOCT FEATURES. :-∆ excellent weather sealing property.∆ esay to use required accessories - scissor, roller∆ high stick longtime stability product.∆ our company policy - best quality best delivery best rate.
0.0
View Profile
Bitumen Sealing Tape
250 Per Roll
100 Roll (MOQ)
0.0
View Profile
Bitumen Impregnated Hessian Tape
135 Per Piece
0.0
View Profile
self adhesive bitumen tape
600 Per Piece
0.0
View Profile
bitumen tape
900 Per Roll
1 Roll (MOQ)
0.0
View Profile
bitumen tape
130 Per Roll
0.0
View Profile
Bitumen Aluminium Flash Tape
Get Price Quote
Product brief: butyl & bitumen based flashing tapes are cold applied self- adhesive tapes with one side bitumen adhesive protected by release film and other side is re-enforced aluminum foil. This tape is very useful to prevent leakages, fill cracks, joints for various surface like metal, cement, asbestos, fiber, plastic, vinyl etc. Bituminous flashing tape is widely used for flashing applications. Flashing tape is a simple yet highly effective solution for waterproofing, sealing and insulation. Product features: it is a convenient, ready-to-use self-adhesive bitumen flashing tape with a reflective aluminum foil face. It has following features- · excellent adhesion to most substrates without needing a primer · flexible ,durable and tear resistance : bituminous waterproofing · bonds to itself so can be overlapped or repaired · ready to use self-adhesive - simply peel and apply with hand pressure, no skilled labor or special equipment required · versatile - can waterproof a variety of applications · compatible with bituminous roof treatments, easy release silicone backing paper application: â· roofs - around chimneys and skylights, over joints cracks in tiles and roof cladding â· exterior walls - joints and cracks in asbestos cement sheeting, cracks under masonry ties and anchorages, around wall penetrations (such as water pipes), gutters and downpipes. · terraces - at joints between terraces and exterior walls, joints in parapets, roof edges, sides, flashings and joints. Inside the house - leaking pipes, showers etc. · use over old paint and waterproof plaster, cement, fibre-cement, bricks, roof tiles and slates, galvanized iron, metal, bituminous treatments, felts, wood and plastic · ideal for box gutters, valley gutters and downpipes.
0.0
View Profile
bitumen tape
220 Per Piece
0.0
View Profile
bitumen tapes
Get Price Quote
Bitumen tape is with a self- Adhesive surface of the waterproofing, sealing material, divided into with base membrane and without base membrane. And one side with self- Adhesive layer and two sides with layers two kinds. The self- Adhesive layer has covered with release sheet. The material of release sheet also has a few kinds. Heavy duty butyl bitumen compound adhesive Excellent adhesion to pipe and self Flexibility provides extra protection at vulnerable areas Excellent conformability and consistent uniform thickness Easily applied with no special equipment Compatible with common pipe coatings Excellent resistance to cathodic disbonding Resistant to UV Can be applied over a wide temperature range
0.0
View Profile
Bitumen based Pipe Coating Tapes
Get Price Quote
We are offering best bitumen based pipe coating tapes.
0.0
View Profile
bitumen tapes
Get Price Quote
bitumen tapes, anti-corrosion pipeline coatings, anti corrosion tapes
0.0
View Profile
Post Free Ad
