Blower Silencer Dealers

• Material: mild steel / stainless steel
• Color: silver
• Country of Origin: Made in India
• Surface Treatment: High temperature resistant paint
• Shape: cylindrical
• Features: Superior strength,Perfect finishing ,High tempertaure resistant paint
• Usage/Application: sound absorber
• Resistance Loss: Less Then 98 PA
• Brand: Ddstha Mechanicals
• Blowing Rate: 3500-15000 mA3/h
• Noise Elimination Quantity: 14-18 dB

• Brand Name: Silent Power Chamber
• Material: Acoustic Panel,PU Foam,Rockwool,Steel,G.I
• Logo: SPEC
• Condition: New Good
• Place of Origin: Hydrabad

Lot of Blower Silencers, depending upon the volume of the air/ gas to be handled and the operational pressure requirements, operate at very high speeds and generate medium to high noise levels. As these Rotary Blower Silencers, more often than not, run continuously to meet operational requirements, emit continuously noise levels. These blowers have suction on one side as and delivery on the other side. A carefully designed acoustic enclosure needs to be installed around the Compact Blower Silencer to control the noise and take care of the motor and the blower casing ventilation, as some tend to emit heat. We have enclosures designed for all types of blowers for various noise level reductions. We have firmly positioned ourselves as one of the preeminent Industrial Blower Silencers Manufacturers in India.

• Material: MS
• Country of Origin: Made in India
• Temperture Range: 30 / +150 (Deg.C)
• Available Diameter: 100 mm - 350 mm (4
• Air Velocity: 30 m / s
• Size: Custom
• Dimension: Custom
• Colour: Custom

The Roots type blower is a positive displacement lobe pump which operates by pumping, or moving, a fluid, usually air, but in some cases a process gas, using a pair of inter-meshing lobed rotors, which have a profile that looks not unlike the number 8. When operating, the fluid is trapped in the outer pockets surrounding the lobes and is carried, or progressed, from one side of the machine to the other. The lobe shaped rotors (usually two lobes, but it can be 3 or 4) work in tandem and move the fluid, usually air, from one side of the machine to the other. The lobes do not grab, or scoop the air out of the inlet pipe, but rather as they pass the inlet opening they cause a local low pressure area inside inlet port of the machine into which the fluid will then flow. As the rotors continue to turn the fluid that has entered the machine is trapped by the rotors and progressed from the inlet side to the outlet side. On reaching the outlet side the fluid has no choice but to be pushed out into the discharge pipe. Each time one of the rotor tips passes either the intake or exhaust port, the passing of that tip causes a pressure pulse to be generated. Therefore in the case of a blower with rotors that have 2 lobes there will be 4 pulses for each complete revolution of the pair of rotors (2 pulses from each rotor for each revolution). This allows for a relatively easy estimation of the principal frequency of pulsation that the machine will generate. Whilst the frequency of the noise from the passing of the rotor tips at the intake and exhaust ports is well understood, there is a second noise mechanism where the fluid tries to pass back through the machine from the high pressure side to the low pressure side by "slipping" around the rotors at their tips. This is an aerodynamic noise mechanism and is less easy to predict as the noise level changes with the speed of the blower and the gap between not only the rotors, but also between the gap between the rotors and the casing.  

Blower silencers are required in many applications such as industrial processing and waste water treatment. With a resume that includes hundreds of thousands of blower silencers sold to date, BCS is an industry expert in blower silencing needs. Silencers are a necessity on any blower installation. When selecting a blower silencer, there are two basic considerations the first is that the silencer must be of the correct size and the second is the silencer must be the proper type for the application. The nominal silencer size need only be based on the gas volume. However, the silencer design must be selected with consideration of the blower size and operating speed. In a closed blower discharge system, structure-borne noise such as that radiated by pipe wall and silencer shell may be a consideration, particularly where a strict, close-proximity noise specification applies. For these applications, various solutions are available to treat the pipe- and shell-radiated noise such that most reasonable specifications may be met. For instance, it is possible to lag the silencer shell externally, and reduce any shell noise contribution to below the casing and mechanical noise of the blower and driving machinery.   Blower Silencer Features: Heavy gauge perforated sheet is used. Lifting lugs and saddle are provided with proper calculating load and stress. Heat Resistant Aluminum Paint is applied on the surface area (800°C) based on customer requirement. Quality acoustic fills and Insulation is used. Sandblasting is done on the surface area. We have qualified welders for all types of welding joints for structural work. We have approval from third party inspection for WPS, PQR and WPQ records for all the welding positions like 1G, 2G, 3G, 4G, 6G. We have NDE LEVEL-II inspector for RT, UT, VT, PT, MT.       Blower Silencer Optional Features: High Temperature Acoustic fill Material Material Selection Extra Support lifting Lug, Support Saddles Special Paints Design Process for Suction or Discharge Silencer Medium Flow rate Pressure Temperature Allowable Pressure drop Line Size Unsilenced Noise Level (dB at distance)

ICM ENGINEERING PVT. LTD. is one of the most prominent Manufacturers & Exporters of Blower Silencer. We have been efficiently serving Vacuum Blower Silencer to all engineering organizations. Our Rotary Blower Silencers are high demand in the domestic as well as foreign market only because of their effective services. Our Blower Silencer is easy to handle and one of the cost effective products out of our ranges. It has been tested on various quality parameters so that you get only high quality product.

• Type: Blower Silencer
• Material: Iron, Metal, Mild Steel, Plastic
• Shape: Round
• Certification: ISI Certified
• Length: 1Ft, 2Ft, 3Ft, 4Ft, 5Ft, 6Ft
• Color: Black, Grey, Silver
• Condition: New, Used
• Finishing: Non Polished, Polished
• Feature: Corrosion Resistant, Durable, Fine Finished, Fireproof, Heat Resistant, Perfect Fitting, Reduce Voice

• Material: Mild Steel
• Brand: Leister
• Environmental Protection: IP 54
• Weight: 9 kg
• Outside Diameter Air Inlet: 80 mm
• Max. Ambient Temperature: 75 Degree Celsius
• Noise Emission Level: 61 db
• Outside Diameter Air Outlet: 60 mm
• Frequency: 50 Hz
• Air Flow: 4700 l/m
• Power Consumption: 250 W
• Voltage: 230 V
• Max. Air Inlet Temperature: 200 Degree Celsius
• Static Pressure: 1.0 kPa

We are engaged in manufacturing and supplying of blower silencer

blower silencers, Acoustic Enclosures, Marine Chilling Compressor

Fan- Blower Silencer, Start Up Vent Silencer

Turbo Blower Discharge Silencers

Discharge Silencer For Blower, FD Fan Silencer, Steam Vent Silencer

Blower Silencer, Acoustic Enclosure, steel diesel tanks

Fan & Blower Silencer, Stack & Bypass Stack Silencer, Start Up Vent Silencer

Blower Silencer, Blending Drum, Paint Spray Booth, stainless steel ducting

Rotary Blower Silencer, Silencers for Industrial Engine, potato planters

Twin Lobe Blower Silencers, Wooden Wall Panel, noise absorbers

blower silencers

Blower Silencer

blower silencers, Acoustic Louvres, acoustic windows

Blower Fan Silencers, Suction and Discharge Silencer