Bod Incubator
65,000 Per Piece
1 Piece (MOQ)
GMP Model BOD Incubator
Get Price Quote
Best Deals from Bod Incubator
Bod Incubator
45,000 Per piece
1 Piece (MOQ)
BOD Incubator (Bio-Oxygen Demand) are used to maintain temperature for test tissue culture growth, storage of bacterial cultures and incubation where high degree of constant temperature accuracy is required. Thermolab BOD Incubators provide accurate conditions and uniformity throughout the chamber.
Bod Incubator
Get Price Quote
Details : Double Wall Structure with insulation to prevent thermal losses. Compressor - Emerson make full view inner glass door with lock & key arrangement. Air Circulating fan for Uniform Temp.
Bod Incubator
72,000 Per Piece
1 Piece (MOQ)
Bod Incubator 1
Get Price Quote
b.o.d. incubators are suitable for preservation of vaccines, insulin, lever extracts, chemicals etc. and to make biochemical oxygen demand determination. the low temperature indicator is made of double walled mild steel sheet finished with epoxy based powder coated, inner chamber is made of highly polished stainless steel or alluminium. two doos are provided. inner door is made of transparent acrylic for inspecting specimens, outer door is insulated and is fitted with magnetic tape with lick and key. temperature range from 5 d to 50degree c with an accuracy of +-1 d, provided with two air circulating fans, high performance compressor, cooling coils, heating elements, digital temperature control and display is also fitted with a door operated illumination and a caster wheel for easy mobility. .\n \nb.o.d. incubator provided with p.i.d. controller instead of electronic digital temperature indicator cum controller is provide if required at an extra cost.
Laboratory BOD Incubator
90,000 Per Piece
1 Piece (MOQ)
Bod Incubator
Get Price Quote
1 Unit (MOQ)
The BOD Incubator which we manufacture is built with a double walled construction. The Low Temperature BOD Incubator available with us has an outer body of mild steel with powder coat finish. It is fitted with Vertical Model Front opening door with magnetic full flap gasket to minimize the heat loss. Our BOD Incubator is widely appreciated for its high quality and precise results. The inner full length glass door for viewing of specimens without disturbing inside temperature is provided with our BOD Incubators. We are well place among the topmost Bio Chemical Oxygen Demand Incubator Suppliers.Features : Rear mounts motor with blower for air circulation & uniformity Top mounted control panel for easy access Solid State Digital Temperature Controller & RTD - P.T 100 Sensors Double Wall S.S. Tubular heating element Illumination in chamber S.S. Rods made shelves with adjustable runners Digital Timer with temperature indicator. Printer interface available. SS shelves or racks can be provided on demand. Equipped with CFC free refrigerants and air- cooled compressors, the instrument performs conditioning procedures required in various industries. The Humidity Chamber comes with aerodynamically shaped fans for maintaining heating, cooling, humidification and dehumidification efficiency and provides environmental simulations.Capacity 18" L X 18" W X 18" H 90 LTRS 20" L X 20" W X 28" H 175 LTRS 20" L X 22" W X 34" H 225 LTRS 24" L X 24" W X 36" H 280 LTRS 24" L X 24" W X 38" H 320 LTRS
Bod Incubator
Get Price Quote
We manufacture B.O.D Incubator that is highly flexible and durable low temperature incubator. Our B.O.D. Incubator is utilized to prepare Biochemical Oxygen Demand determinations and for preservation of chemicals, vaccines, and many more. It is double walled with the inner chamber made of stainless steel and the outer made of mild steel which is duly powder coated. There is insulation between outer and inner chamber of 75mm size which is filled with premium quality glass wool. The entire body lies on caster wheels. It contains a double door chamber where the inner door is made of Perspex Transparent Sheet and the lock is provided on the outer door. The unit is also fitted with illuminated lamp inside the chamber. The temperature ranges from 5oC to 50oC with accuracy ± 1oC. The unit is fitted with a digital temperature controller and an air circulating blower to keep the temperature uniform inside the chamber. These incubators come in different chamber sizes. The Sizes Are 4 cubic feet 6 cubic feet 10 cubic feet 12 cubic feet
Bod Incubator
Get Price Quote
Castor wheel mounted cabinet is double walled with inner chamber of aluminium or S.S. And outer wall of M.S. Sheet duly degreased and pre treated with primers for rust proofing duly painted with attractive stove enamel or power coated paint. The gap of 75mm between the outer and the inner walls is filled with special grade glass wool to prevent thermal losses. Triple walled back of unit is fitted with two air circulation fans for maintaining temperature uniformly throughout the chamber. Full view inner glassperspex door permits inspection of specimens, without disturbing the chamber temperature. Lock & Key arrangement is provided in the double walled outer door . Unit is fitted with door operated illumination lamp inside the chamber. Refrigeration unit is formed by ISI marked compressorcooling kit. The front panel is provided with separate indicator lamps for main, heating and incoming voltage.
Walk in BOD Incubator
Get Price Quote
1 Piece (MOQ)
When your testing requires a walk in rooms choose “TEMPO” controlled temperatures solution. Our test rooms feature automated process control, energy efficiency and a vast range of other features and options. Every “TEMPO” environmental room features equipment that reliably produces required conditions, structural integrity that keeps the room working properly through years of demanding test cycles, and measuring/monitoring equipment that precisely records all test data.Standard ModelsInside S.S. 304 with mirror polish & outside mild steel powder coated.GMP ModelsInside S.S. 316 with mirror polish & outside stainless steel 304 with the dull buff finish.ConstructionDouble walled constructed PUF modular panels ensure easy assembly at site. The leak proof door with a full gasket and airtight mechanical lock ensures there is no leakage through the chamber. The observation window (30 × 30 cm) is provided for viewing the sample inside the chamber. The unit is provided with perforated stainless steel trays.Technical Specification Air Circulation : The motorized blower at the backside of the chamber provides the recirculation of air which ensure the maximum uniformity of temperature and humidity inside the chamber should be maintained. Heating System : The high quality SS tubular heater made from the nichrome wire sheathed in SS tube is used. The special arrangement of heaters avoids the direct rendition of stored samples. Humidity System : High-quality U shape S.S. tubular heater is used for better heating. Humidity System : Steam injection system with water level arrangement is provided. A low pressure boiler tank and reservoir tank with duly argon welded is fitted with a float valve. When the water level in the tank is low the switch cut off. The ISI marked heating elements are used with the inbuilt stand by humidity system with auto change over the facility. Refrigeration System : The CFC Free hermetically sealed Emerson Copeland make compressor is used for better cooling with eco friendly refrigerant. The cooling system is made up of split type and the compressor is coupled with the condenser unit in a well ventilated area to avoid the hot air throw inside the chamber. Control System : The microprocessor based PLC (logging capacity of 1000 readings) with HMI touch screen 4.3″ colour display, which gives the direct display, the process value and the set value of temperature and humidity inside the chamber. The sensor (transmitter type 4-20 ma) which will accurately measure the temperature and humidity is provided with a high speed ethernet communication. The internal working area is illuminated. FeaturesThe sturdy design and long lasting finish ensure the minimum maintenance is required. The tongue and the grooves are moulded to close tolerance ensuring there is a tight fit between the panels. These prevent the condensation from forming on the foam a which minimizes the heat transfer. The high quality hardware like hinges and handles used in panels are indigenous and are imported.Safety Features Audio visual alarms are used for temperature and humidity variations. If the temperature increases above the 60°C the system will automatically cut off the dry heater, wet heater and the compressor. The float switch is used to cut off the wet heater supply in case of the water level in the tank goes below. Optional Features CFR 21 part 11 compliance software for PLC with RS 485 or ethernet communication Data logger CFR 21 part 11 compliance software for data logger Data scanner complete with sensor SMS mobile alert system Door access security system
Bod Incubator
200,000 Per Piece
1 Piece (MOQ)
Bod Incubator
Get Price Quote
1 Piece (MOQ)
Temperature upto 5°C to 50°C with accuracy of±1°C. Double walled, inside anodizedaluminum/stainless steel and outside M.S. powder coated to work on 220/230 voltsA.C. 50Hz Optional Timer 0-24 hours day night cycle 3400 Co2 air mixer nozzle is provided 1400 Internal illumination with 3 fluorescent tubes. 7900 Microprocessor PID digital temp. Indicator-cum-Controller with digital. 14500 Automatic Voltage Stabilizer 3-5 KVA (recommended must). 13200
Bod Incubator
95,800 Per Piece
1 piece (MOQ)
0.0
Website
Bod Incubator
Get Price Quote
BOD incubators has been designed especially for biological Oxygen demand determination & other applications like general incubators, Serum studies & Enzyme assays test. Note :- We have different Diameters / Capacity as well in the product
Bod Incubator
Get Price Quote
1 Piece (MOQ)
Laboratory BOD Incubator
88,760 Per Piece
1 Piece (MOQ)
BOD Incubator (Bio-Oxygen Demand) are used to maintain temperature for test tissue culture growth, storage of bacterial cultures and incubation where high degree of constant temperature accuracy is required. Thermolab BOD Incubators provide accurate conditions and uniformity throughout the chamber.Standard Features : Inside Stainless Steel and Outside Mild Steel Powder Coated OR Stainless Steel Interior illumination Inside full length observation glass door with secure gasket Heavy-duty door hinges and latches to maintain a secure and uniform seal Racks & trays – Stainless Steel with adjustable height U shaped S.S. Nichrome wire air heaters Compressor with CFC Free R 134 A / R 404 (Eco Friendly) refrigerant having state of art by-pass system for continuous run of compressor Safety controller sensor to cut off the supply in case of overshoot and undershoot of temperature giving audio visual alarm Web based online monitoring Complete with IQ, OQ, PQ, Documents, Operations and Maintenance manuals
Bod Incubator
19,900 Per Piece
1 Piece (MOQ)
Bod Incubator
Get Price Quote
1 Piece (MOQ)
Bod Incubator
Get Price Quote
Features: Precisely designed Accurate testing Reliability
Bod Incubator
Get Price Quote
Incubator is used to grow and maintain microbiological cultures or cell cultures Incubators are essential for a lot of experimental work in cell biology, microbiology and molecular biology and are used to culture both bacterial as well as eukaryotic cells The entire range of incubator is used at research and clinical laboratories for sterilizing surgical equipment and tools for a long period of time Features : Double walled construction inner chamber made of Stainless Steel 304Q & exterior made of G.I. sheets powder coated Double walled construction inner chamber made of Stainless Steel 304Q & exterior made of G.I. sheets powder coated The gap between the walls is filled up with special grade glass wool for proper insulation to avoid heat losses. Forced convection system ensures good mixing, strong dispersion and maintains higher temperature uniformity inside the chamber It is fitted with heavy hinges with a ball catcher, Door is duly insulated with glass wool Comprising of switch to ON/OFF the power, thermostat control knob and indicators for mains and thermostats, cord and plug. It works on single phase 230V AC, 50 Hz power supply Temperature Range: 5oC above ambient to 60oC Temperature Resolution: 0.1oC Control Accuracy: +-0.5oC Optional : Forced Air circulating System with Fan for temperature Uniformity Temperature controller by Microprocessor based Auto Tune PID controller with 0.01 resolution & PT 100 as sensor. Electronic Digital Timer 21 CFR Part 11 compliant machine for pharmaceutical industries
Bod Incubator
45,000 - 150,000 Per Piece
1 piece (MOQ)
Shi-123 B.o.d. Incubator (super Delux Automatic) double Walled Chamber with Interior Walls Made of Stainless Steel. the Exterior is Made Heavy Mild Steel Finished with Stoving White Enamel. the Door is also a Double Walled Construction. the Temprature Range is from 5-60ºc, With an Accuracy of +/-0.5ºc, Controlled By Digital Temperature Controller Cum Indicator. Temperature Below Ambient is Maintained By a Hermetically Sealed Techumshah/kirloskar Condensing Unit / Compressor with Complete unit Provided At the Bottom, Complete with Stainless Steel Trays, Two Air Circulations Fan and Unbreakable Acrylic transparent, Inside Door. to Work On 220/230 V, Single Phase Ac Supply. chamber Size (wxhxd) Cap. (cuft.) S/steel a. 450 X 610 X 410 Mm 4.0 60000/- b. 500 X 825 X 415 Mm 6.1 66000/- c. 565 X 865 X 550 Mm 10.0 70800/- d. 650 X 875 X 550 Mm 12.0 83000/- e. 650 X 875 X 550 Mm 15.0 93500/- optional Accessories : 1. Inner Illuminator with 3 Nos. Fluorescent Tubes of 60cm. 3000.00 2. Automatic Cyclic Timer 0-24 Hours Regulating Illuminating Cycle 3600.00 3. Arrangement for Incubating in Co2 and Air Mixture with An 6000.00 inlet Nozzle Provided with a Means of Admitting of Co2. 4. Rs-232 Interference for Computer Compatible with Software. P.o.r. (shi-123)
0.0
Website
Bod Incubator
Get Price Quote
Bod Incubator
Get Price Quote
BOD Incubator is designed primarily to meet requirement of chemical oxygen demand test equipment are suitable for closed control of incubation temperature. We are a renowned BOD Incubator Manufacturer, Supplier and Exporter from Mumbai, India. We offer these BOD Incubators in varied grades and specifications as per the demand of the clients. Construction : The unit is a double walled chamber, with glass wool insulation. Interior is made of stainless steel and exterior is mild steel powder coated finish. The unit has full-length glass door and outside metal door with magnetic gasker and lock. The unit is provided with perforated stainless steel trays. The unit consists of main switch, digital microprocessor temperature controller with PT-100 sensor, chamber light. Forced air circulation for uniform temperature, safety controller, Hermetically guard compressor and Castor wheels for easy move ability. The unit Works on 230 Volts AC and 50 Hz mains supply. Various Type Of Temperature Controls Offered (Standard Model) : Time proportional On/off controller-cum indicator Micro controller based PID controller cum indicator. Controller with printer interface as optional Controller interface through Rs 232 C/RS 485 for multiple networking Feature (Optional For Gmp / Ich Model) : ICH Guide Lines followed. S.S. Removable trays. HRC fuse for all controls. Optional Accessories : Strip Chart Recorder. 0 to 24 hrs Timer for regulating illumination conditions. Note : Guarantee ceased in case of non-use of suitable servo stabilizer & to be stored in A.C. Room. Due to continuous R & D model/specification may change.
Bod Incubator
Get Price Quote
Ambinova BOD Incubator
Get Price Quote
1 piece (MOQ)
microprocessor based temperature control height adjustable shelves 2 point door seal temperature range amb +5 to 60°c accuracy 0.5 @ 37° c uniformity 0.5 @ 37° c
Stainless Steel BOD Incubator
Get Price Quote
1 Piece (MOQ)
B.O.D. Incubator
Get Price Quote
Bod Incubator
Get Price Quote
1 Box (MOQ)
These low-temperature incubators also known as BOD Incubators are widely used to test the presence of bacteria in the seeds or grains and to ensure the quality of the grains being offered. We offer these machines that are manufactured with high-grade material and components in our state of the art facility with a focus on quality and durability. We are exporters and suppliers for Haryana in India.
B O D Incubator
22,500 Per Piece
1 Piece (MOQ)
We offer B.O.D Incubator that are available in different standard sizes and wide temperature range. Bod incubator is mostly used for drying. Antibody & other bacteriological tests. Crystallization & hydroxy steroid incubation studies, paraffin embedding, slide staining and other microbiological tests at constant temperatures. The used categories include chemicals & bio-chemicals. Pollution control & monitoring. Research & development and quality control labs, pharmaceutical laboratories, microbiological & biotechnology labs, college & classrooms.
Post Free Ad
