Boiler Gas Train Dealers

• Condition: New
• Function: Gas Pressure regulation
• Pressure: High Pressure Bar
• Application: Boiler and burner,Industrial
• Size: DN15 - DN 150

We are the main supplier of this product.

A gas train is designed to allow for the safe flow of LPG or natural gas to your burner. A gastrain consists of Filter, Slam-shut off valve, pressure regulator, safety relief valve & flame arrestor.

• Max Flow Rate: 50 M3/Hr To 600 M3/Hr
• Type: Straight Type
• Design: Modular Design
• Application: Industrial
• Packaging Type: Carton Box
• Maximum Operating Gas Pressure: 1-4 Bar

Integrated Process Control/Flame Supervision Safety Interlocks Of International Standards Regulation Of Pressure, Flow And Fuel| Air Ratio Options For Alarm And Data Logging Customizable To User Requirements

We are regarded as a well-known Manufacturer & Supplier of Gas Train from Maharashtra, India. The Gas Train is used to reduce the pressure of gas up to the required system pressure in various industries. We manage a huge stock of the Gas Train in our spacious warehouse to address bulk requirement of the buyers with ease. We are offering Gas Train to buyers at nominal rates.   Types : Gas Flow Train, Gas Train, Gas Supply Train, Boiler Gas Train, Burner Gas Train, Pressure Gas Train, Burner Gas Train, Gas Train Valve,    

• Type: Gas train
• Size: 25mm to 50mm
• Brand/Make: Honeywell
• Material of Construction: Integrated Gas Trains
• Model/Type: Gas Train
• Minimum Order Quantity: 1 Number

Gas Trains for Standard gases (Natural gases / LPG): Proper fuel pressure plays an important role in efficient running of burners. We at Combustion Concepts select the right component for proper safe working of the system with our wide experience.   Gas trains are completely assembled with various components and factory tested for proper working. They mainly consist of the following:   (1)  Main Isolating valve at inlet. (2)  Gas filter for filtering. (3)  Slam Shut off valve, to protect components provided after the gas regulator from high pressure in case of gas regulator failure. (4)  Gas regulator: To provide a constant predetermined pressure at burner inlet. (5)  Gas safety relief valve: To release surges in gas pressure at the time of starting the system. (6)  Gas pressure switch: To cut off the burner in case of low pressure. (7)  Safety and Main Solenoid Valves: Two numbers valves are provided in series as a safety against gas leakage in the system during shutdown period. These valves can be direct operating solenoid valves or butterfly valves with pneumatic actuators depending on the quantity of gas to be handled. (8)  Pilot Gas Train: This consists of isolating valve, pilot regulator and solenoid valve for generating pilot flame which will ignite the main flame. (9)  Pressure gauges at the inlet, after the regulator and at burner inlet are provided with isolating valves. Low pressure gauges are provided with block and bleed valves. These valves keep low pressure guages isolated most of the time. In addition to the above,  valve proving system (VPS) can be provided for safety against gas valve leakage.

• Brand Name: TECNOGAS

Energy combustion, ahmedabad a local and genuine source of all types of gas train and its accessories. we are distributor of all types of tecnogas italy make gas train. available products. (inlet pressure 2 bar & 5 bar). gas filter gas pressure regulator slum shut off valve safety relief valve pressure relief valve pressure switch air gas ration regulator etc. available size:- up to 3"

Gas  Filter,  Regulator ,  Slam Shut off Valve,  Relief ValvePressure Switch ,  Solenoid Valve,   Gas Air  Control  ValveMulti Block  Valve ,  Pressure Gauge,

• Material: Mild Steel
• Inlet Pressure: 0.5 - 6 Bar
• Flow Range: 5000 Nm/Hr
• Connection: DN15,DN300

• Clamping: : Tube Clamps
• Train type: Single/Multiple Burner
• Sizes: DN15 to DN100 (Higher Sizes on request)
• Mounting: MS structural Mounting skid

Prepiped And Customised Gas Trains: We offers Gas Trains in Standard and Custom Configuration and Construction. Since, The Gas Trains is the essential Part of Gas Burner Safety, We offers Gas Train on line of NFPA 86 Burner & Boiler Safety Regulations. Pre-Piped and Pre-Tested Gas Trains are tremendous Time and Effort savers and are made to be as easy as Plug & Play. Gas Trains are available for almost all Gaseous Fuels like LPG, Natural Gas, Propane, Biogas and Clean Producer BF Gas. Most of the MADAS Gas Train Components are ATEX approved for Installation in Zone 2 & 22, Group II 3G & II 3D. Product versions for Installation in Zone 1 & 21, Group II 2G & 2D also available. All Gas Trains are tested for Leakages, Flows and Components requiring setting are accurately set to the Set points. A Prewired Junction Box is available as option, which facilitates the Wiring of all Electrical Devices on Gas Train at a Single Terminal Strip. Various configurations available as per Customer and Combustion System Requirement, including Flow meters and Control Valves. Inlet Connections from DN25 to DN150 Outlet Connections from DN25 to DN200Inlet Pressure ratings from 0.5 Bar to 5 Bar

We are engaged in the designing and development of highly effectual Gas Train.

A gas train consists of filter, slam-shut off valve, pressure regulator, safety relief valve & flame arrestor. Filter helps to remove the dust dirt particles in the gas which may damage the regulator parts. The slam shut off valve normally remains open. Incase the outlet pressure of the regulator exceeds the permissible limits, the slam shut off valve senses it through the impulse line & instantly shuts off the supply to the downstream system. The safety relief valve is provided for additional safety. It is to be set at higher pressure than the slam shut off valve pressure so that the safety relief valve will operate only when slam shut off valve fails to operate. The outlet of the safety relief valve is vented well above the roof.

Boiler Gas Train, gas pipe, safety devices

Sohum gas control equipment are ideal for providing a perfect mix of specialty and high purity gases. Mostly used in applications involving refillable and non-refillable gases, these have inbuilt, light weight regulators that are used for gas mixtures supplied in cylinders. We offer a series of regulators for all types of gases, as few gases require less flow whereas co2 and other gases need a regulator to avoid freezing and related problems. Flowmeter is a type of gas control equipment offered by us. It is used for measuring the flow rate of gas in a precision manner. The range includes: Cylinder valves Fine control valve Single and multi stage pressure regulator   Sohum Auto Gas is an ISO 9001:2008 certified company following the national and international quality processes to design a range of Gas Trains. They are widely used with efficient Burner Control Systems for controlling the quantity as well as rate of gas from fluid to burner. They are ideal to be utilized in different application areas from block-type thermal power stations to gas motors to gas blower burners. They are designed using a modern combination of advanced technology with the best quality materials to ensure to provide application specific designs for industrial furnaces, thermal power stations, steam boilers etc. In addition, they are also employed in different thermal production processes. Parts or Components- Gas Trains Slam-Shut Off Valve Safety Relief Valve Main Pressure Regulator High And Low Pressure Safety Switch Gas Connector Ball Valve Flow Monitor Flame Arrestor Filter Dual Safety Shut Off Valve Working Principle- Gas Trains These trains are available with the filter part that is utilized to eliminate dirt and dust from the gases to ensure to provide no harm to regulator parts. Slam shut-off valve is always kept in open position. When the outlet pressure is increased beyond a definite limit, the supply is automatically cut off by the valves to secure the system. The function of safety relief valve is to provide extra safety and ideal backup to Slam Shut-off Valve.   Why Choose These Gas Trains? The designs of our gas trains are innovative and perfect for ensuring improved control of managing the rate of gas flowing from a gas supply to burner. It has in in-built sensor which calculates the flow rate of fluid. These can be easily used in various conditions such as at different air pressure, fuel flow pressure, temperature and others.   Recognition & Accreditation- Gas Trains Approved by CE Mark As per ISO 9001:2008 standards Compatible with all types, models and brands of Gas Burner Systems Extensive dealer network across India with 80 retrofitting centers Gas Trains Are Recognized By: Maharashtra Natural Gas Limited Honeywell Automation India Limited and varied other national / international organizations

Boiler Gas Train, Screw Pumps, Glycerin Transfer Pumps