Bowed Roll Dealers

• Type: Bowed Roll
• Material: PVC, Rubber
• Shape: Round
• Color: Green, White, Yellow
• Condition: New, Used
• Width: 0-500 Mm, 500-1000 Mm
• Diameter: 140 Mm, 30 Mm
• Length: 0-2000 Mm, 2000-4000 Mm, 4000-8000 Mm
• Speed: 100 Meter/min, 50 Meters/min, 75 Meter/min

Bow Roll is the most commonly used wrinkle remover device. It mainly consists of bowed shaft, metal segments, sealed ball bearings, abrasion resistant, rubber sleeve etc. We Are Also Manufacturer Rubber Fillet,Bow Rolls from India. Our skilled engineers have designed bow roll for the application to get maximum result from wrinkles.

• Sizes: Diameter up to 300 mm

This is the most commonly used wrinkle remover device. It mainly consists of bowed shaft, metal segments, sealed ball bearings, abrasion resistant, rubber sleeve etc. bow roll'CONPAPTEX' make Expander Rollers Bow Rolls having very wide range of dimensions and suitable for equally wide range of applications and web materials. They are supplied with mounting brackets, which could be either wall mounting or foot mounting. The Expander Rollers we offer consist of bowed shafts, sealed ball bearings, abrasion resistant sleeve and metal segments. These are widely used as wrinkle remover devices in various industries and are available with us in various dimensions. Further, these are also supplied with gear set and mounting brackets which can either be Foot Mounted or Wall Mounted.

Bow Roll is known as Spreader Rolls, Bowed Rolls, Curve bar Expanders, Banana Rolls, Camber Rolls, and Wrinkle removing Rolls. Bow Rolls are available in rubber surface, hard chrome surface and also Teflon covering for non-sticking applications. Hard chrome surface Bowed Roller is used where speed is more than 300 meters minutes. If the speed is more, the bigger diameter is used to reduce the rpm of the roll. Bow roll works only when there is proper lead-in and lead-out distance and kept the roll in proper warp angle with web material. To do such warp angle adjusting all rolls are supplied with bow angle adjusting worm-worm wheel gearbox with hand wheel and counter pedestal bearing block. By use of this it is possible to adjust the bow angle at 360 degree warp angle. When the Roll get maximum wrinkle removing, stop the bow angle adjusting and put the roll on bow locked position. Do not do any change in the bow setting bow warp angle with web materials is set. On shaft bow position indicated an arrow showing the bowed position of the Roll. Metal expander with hard chrome plated surface is used for high speed application. Teflon sleeve is used for non-sticking application. Bow Rolls are known as useful for removing of wrinkles, slack edges, spreading and slit separation. Most of the Bow Expander Rolls are driven by web tension itself without any extra drive. Used in Textile processing machines, Plastic converting machines, Paper Industries, in manufacturing, processing, printing, laminating, coating, batching, winding and re-winding. Bow Roll is available foot mounting type & flange mounting type. We are rated among the topmost Bowed Roller Manufacturer in India. Bow angle adjusting worm-worm wheel gear box with hand wheel Metal is used for before high-speed Paper slitter re-winders for wrinkle removing and after slitting to separate slits. Big diameter Roll having heavy weights and paper tension itself not sufficient to drive the Roll so extra pulley is provided to drive the metal bowed Roll. Teflon Expander is particularly used before size press where wet working and extra drive is required for to get roll rotate. Teflon rubber bow roll having application where sticking of substance on roll is problem. We have positioned ourselves as one of the major Bow Rubber Expander Roll Exporters in India.

Bow Roll is known as Spreader Roll, Bowed Roll, Curve bar Expander, Banana Roll, Camber Roll, Wrinkle removing Rolls, Bow Rolls are available in rubber surface, hard chrome surface and also Teflon covering for non-sticking applications. Hard chrome surface bow Rolls are used where speed is more than 300 meters minutes. If the speed is more, the bigger diameter is used to reduce the rpm of the roll. Bow roll works only when there is proper lead-in and lead-out distance and kept the roll in proper warp angle with web material. To do such warp angle adjusting all rolls are supplied with bow angle adjusting worm-worm wheel gearbox with hand wheel and counter pedestal bearing block. By use of this it is possible to adjust the bow angle at 360 degree warp angle. When the Roll get maximum wrinkle removing, stop the bow angle adjusting and put the roll on bow locked position. Do not do any change in the bow setting bow warp angle with web materials is set. On shaft bow position indicated an arrow showing the bowed position of the Roll.   Rubber sleeve covered Metal expander with hard chrome plated surface for high speed application Teflon sleeve for non-sticking application

• Material: Rubber
• Brand Name: Om Enterprise
• Size: as per customer requirement
• Technique: Hot Rolled
• Temperature: 40-120 Deg C
• Usage/Application: Industrial

• Material: Rubber
• Brand Name: Om Enterprise
• Country of Origin: Made in India
• Usage/Application: Textile Industry

• Material: Rubber 
• Diameter: Upto 300 mm
• Length: Upto 1200 mm
• Temperature: 40-120 Deg C

• Material: Rubber
• Roller Length: 0-100 mm,100-200 mm,200-300 mm,300-400 mm,400-500 mm
• Brand Name: Bel Mark

• Features: Control Slack Edges, Remove wrinkles, Separate slit webs on winder

• Width: 1000mm
• Diameter: 140mm

Bowed Spreader rolls are available in hard chrome surface, rubber surface and also Teflon covering for non-sticking applications. Hard chrome surface bow Rolls are used where speed is more than 300 meters per minute. If the speed is more, bigger diameter is used to reduce the rpm of the roll. Bow roll works only when there is proper lead-in and lead-out distance and the roll is kept in proper warp angle with web material. To do such warp angle adjustment, all rolls are supplied with bow angle adjusting worm-worm wheel gearbox with hand wheel and counter pedestal bearing block. With this it is possible to adjust the bow angle at 360 degree warp angle. When the Roll get maximum wrinkle removing stop the bow angle adjusting and put the roll on bow locked position and do not do any change in the bow setting. On shaft bow position is indicated by an arrow showing the bowed position of the Roll.

Bowed roll, machine pin, Rock Drill Bit, Metal stamping machine

Bowed roll, Belmark Industries, Slat Expander Roller