Brake Calipers Dealers

• Country of Origin: Made in India
• Brand: FORCE
• ITEM CODE: T006864200483
• Packaging Type: BOX

• Brand Name: Gupta Ortho Aids

We are offering caliper kit. Hkafo and kafo kit, available in size 1(small), ii(med) and iii(large). Heavy duty stainless steel with nickel plating. Knee joint bars *on spcial order can be made in iron (cheaper quality).

• Size: 0-5inch, 10-15inch, 15-20inch, 20-25inch, 5-10inch
• Type: Caliper Disc Brakes
• Material: Aluminum, Cast Iron, Metal, Steel
• Shape: Round
• Certification: ISI Certified
• Color: Black, Golden, Gray, Silver
• Condition: New
• Frequency: 50Hz, 60Hz
• Packaging Type: Cartoon
• Feature: Corrosion Resistance, Durable, Easy Installation, Flawless Finish, Heat Resistant, Precisely Designed, Robust Design
• Warranty: 1yrs
• Torque: 0-1000nm, 1000-2000nm, 2000-3000nm, 3000-4000nm

• Color: Black
• Condition: New
• Application: Bicyle Use

Kids Bicycle Heavy Quality Brake Clipper Front and Rear Both kids Cycle Brake Punja With Shoe.

Our Brake Caliper are made with high grade steel metal and these are available in all standard sizes. These brake calipers exhibit high stress endurance as well as dimensional stability.

We manufacture brake calipers using durable steel metal. These precision engineered calipers are the ideal mechanical solution for the braking needs of modern automobiles. Our brake calipers are lab-tested for quality, performance and endurance.

• Design Limitations: 70,000 ft-lbs to 1,789,041 ft-lbs design landing KE
• Maximum Operating Pressure (psi): 500 psi to 1580 psi
• Size: 5, 6, 8, and 10-inch designs

The brake assembly and disc combination (part of the main wheel assembly) are designed and qualification tested to properly and safely decelerate the aircraft under various conditions. Unauthorized substitution of components can compromise brake effectiveness, is a violation of the qualification basis, and is prohibited. The brake assembly is an external floating caliper-type design and can be made of either cast magnesium or aluminum. The brake assembly consists of one or more pistons depending upon the aircraft requirements. A brake assembly can also consist of multiple calipers, one forward and one aft of the landing gear, and contain multiple pistons in each caliper. To actuate the brake assembly, hydraulic pressure, applied via the pilot’s and co-pilot’s master cylinders, enters the brake via lines connected to an inlet fitting on the caliper. The pressure then flows through the cylinder and forces the pistons outward against the pressure plate. The caliper should be free to slide on the torque plate assembly bushings allowing both pressure and back plate linings to contact the brake, which will contact the brake disc at precisely the same time. The braking action generates a torque which transmits a braking force converting the kinetic energy into heat, which is absorbed by the brake disc and surrounding components. This braking force is transmitted to the wheel and into the tire, bringing the aircraft to a stop. Releasing the toe pedal relieves the hydraulic pressure from the brake caliper, thereby removing pressure from the disc.

Our metallic brake caliper is ideal for a variety of automobile manufacturers, seeking reliable and durable braking solutions for their new launches as well as existing models. Our brake calipers goes through extreme endurance test, mechanical test and design test to strengthen is reliability.

Being a client-centric company, we manufacture brake caliper only with quality certified metal base that is further finely finished using grinder and buffing wheels. Our brake caliper demonstrates impressive stress endurance and a number of automobile manufacturers prefer buying our product.

Product features: Dual pistons, Floating caliper unit Light weight Cost effective yet powerful alloy and steel brake components for maximum durability Efficient design reduces moving parts for longer lasting performance High quality brake caliper guarantees desired stopping distance. Allows better clearance to the wheel as compared to fixed type caliper. Tested with 100 percent pressure to ensure proper braking function.   Product utility: Brake caliper assembly accommodates brake pots (pads) and pistons. When pressure is applied on the brake pedal, brake fluid through the brake lines reaches the caliper assembly, where the pads get in contact with the disc rotors to apply the braking force and in turn helps in retarding or stopping the vehicle.   How to put it in vehicle: Install caliper with help of provided mounting holes over the mounting on knuckle. First put caliper on disc with gap between brake pad then sync mounting holes of caliper plate with knuckle mounting holes. (Bore of caliper mounting plate hole: 8 mm).  

Disc brake service has become routine for most ­import repair shops. Many shops in the rust-belt service disc brake calipers by simply replacing them with loaded caliper assemblies, but in drier climates, calipers can last for many years and may ­require only routine inspection during a disc brake pad replacement. In order to appreciate some of the fine points of disc brake repair, it's important to review the basic elements of caliper service.Caliper DiagnosisMost disc brake services begin with a routine maintenance inspection or with a customer complaint, such as a brake pull or noise. Many caliper failures result in brake-pull complaints because the caliper piston fails to retract. To allow free rotation of the wheel, a very small air gap must exist between the rotor and brake pad. When the pads on one wheel drag against the rotor, the pad may glaze or the brake assembly temperatures may increase enough to change the coefficient of friction causing a brake-pulling complaint.Last, but not least, a low master cylinder reservoir fluid level might indicate that the brake pads are ­excessively worn. Brake fluid supplied by the reservoir is used to fill the caliper bore as the caliper piston extends to compensate for pad wear. In any case, a low fluid level at the master cylinder reservoir indicates the need for a thorough brake system inspection.

We specialize in providing left as well as right brake caliper for a number of automobiles. These calipers are made high grade steel metal and these are precision engineered to ensure effective braking. Our brake calipers exhibit high stress endurance as well as corrosion resistance as they are painted with black paint.

The brake calipers perform a very important function as a vital part of the Volkswagen braking system. Really, a caliper is one of the most important parts of the automotive brake parts. The job of this part is to slow and stop the vehicle’s wheels by creating a type of friction with the brake rotors.The VW brake calipers perform a very important function as a vital part of the Volkswagen braking system. Really, a caliper is one of the most important parts of the automotive brake parts.  

The automobile manufacturers can obtain from us high quality left as well as right brake caliper. With their high stress endurance, our brake calipers can withstand extreme automobile break force, thereby providing safety to the vehicle riders and passengers.

• Material: STEEL
• Brand: Hero
• Usage/Application: Automotive
• Vehicle Type: Two Wheeler
• Vehicle Model: Splendor

We are specialized in manufacturing of leading design of brake calipers stringent to upper-quality procedures and made with precision techniques, ensuring its reliability having a long working life. Performing perfectly under conditions like rain, snow and moisture, the component along with its functional requirements is duly taken into consideration or under investigation to achieve the design targets solution. Appropriate specifications are included into the design for tolerances and best surface finishing. The different calipers, swinging caliper, floating caliper fitted on the brake pads are engineered with a specially formulated compound that’s ideal for a spirited riding with aggressive stops.

• Thickness: 12,5 mm or 25 mm

Mounting to the machine parallel to the brake disc,Automatic adjustment to counter friction block wear ,Pressure piston 065, 085, 095 or 105 are available for selection, Thruster mounted right or left available.

We are one of the dependable Manufacturers, Exporters and Suppliers of Brake Calipers. Our brake calipers are made with high grade steel metal for high endurance as well as longevity. These calipers are mainly demanded by the automobile manufacturers to ensure safe and reliable braking in their branded automobiles.

We use high grade steel and aluminum metal to manufacture the best in class brake calipers. Duly tested for stress endurance as well as longevity, our brake caliper serve as the best braking solution for the automobile industry. These calipers are easy to install and easy to maintain.

• Brand Name: Wilwood
• Material: Aluminium
• Weight: 450grams
• Piston bore: 1.12inches

We supply finely painted and quality tested brake calipers, which are immensely demanded by a number of automobile manufacturers. The design precision and stress endurance make our brake calipers simply matchless in their segment. The buyer can obtain brake calipers in bulk from us.

• Material: Mild Steel
• Brand Name: ADS Auto
• Packaging Type: Packet
• Usage/Application: Audi R8

We bring forth brake caliper that is made with high grade aluminum metal. These brake calipers showcase high mechanical strength as well as corrosion resistance, thus are demanded immensely in the automobile sector.

When it comes to effective braking in the vehicles, then some leading automobile manufactures rely our metallic and precision engineered brake calipers. These calipers showcase high stress endurance and maintenance free long life.

• Feature: Ease of maintenance; no need to jack up aircraft for lining change • Easy installation and removal from aircraft for overhaul • Lower cost of operations
• Size: 5, 6, 8, and 10-inch designs

The brake assembly and disc combination (part of the main wheel assembly) are designed and qualification tested to properly and safely decelerate the aircraft under various conditions. Unauthorized substitution of components can compromise brake effectiveness, is a violation of the qualification basis, and is prohibited.