Brake Wear Sensors Dealers

• Material: Mild Steel
• Size: 4inch
• Feature: Good Quality
• Car Make: BMW
• Thickness: 20-30mm
• Warranty: 1year
• Packaging Type: Box
• Minimum Order Quantity: 1 Box

BMW Car Brake Pads Sensor, Brack Disk Pads, Disk Brack Pads BMW Car, Car Brack Pads, Disk Brack pads BMW 520D,Replacing the rear brake pads on a BMW 7 Series is a relatively straightforward process if you're familiar with basic car maintenance. Here are the general steps you can follow: Tools and Materials Needed: Jack and jack stands Lug wrench Socket and ratchet set C-clamp or brake piston tool New brake pads Brake cleaner Anti-seize lubricant Torque wrench Steps to Replace Rear Brake Pads: Preparation: Park the car on a level surface and engage the parking brake. Loosen the lug nuts on the rear wheels but do not remove them yet. Lift the rear of the car using a jack and secure it with jack stands. Remove the rear wheels. Remove the Brake Caliper: Locate the brake caliper bolts on the rear brake assembly. Use a socket and ratchet to remove the caliper bolts. Carefully slide the caliper off the brake rotor and suspend it using a piece of wire or a bungee cord. Do not let it hang by the brake line. Remove the Old Brake Pads: Remove the old brake pads from the caliper bracket. If the brake pads are held in place with clips, carefully remove these as well. Prepare the Caliper: Use a C-clamp or a brake piston tool to compress the caliper piston. This will create enough space for the new, thicker brake pads. Clean the caliper and surrounding area with brake cleaner. Install the New Brake Pads: Apply a thin layer of anti-seize lubricant to the back of the new brake pads to prevent squealing. Place the new brake pads into the caliper bracket. Reinstall any clips or hardware that were removed. Reinstall the Brake Caliper: Carefully slide the caliper back over the new brake pads and onto the rotor. Reinstall the caliper bolts and tighten them to the manufacturer's specifications using a torque wrench. Reinstall the Wheels: Place the wheels back onto the car and hand-tighten the lug nuts. Lower the car back to the ground using the jack. Use a torque wrench to tighten the lug nuts to the manufacturer's specifications. Final Checks: Pump the brake pedal several times to ensure the brake pads are properly seated. Check the brake fluid level and add more if necessary. Test drive the car at low speeds to ensure the brakes are working correctly. If you're not comfortable performing this task yourself, it's always a good idea to seek help from a professional mechanic.Car Brack Parts supplier.